Using a Butane Torch For Making Your Own Jewellery At Home

Подписаться 137 тыс.

Просмотров 91 тыс.

50% 1

If you are having problems with your silver and gold soldering and you have followed all the correct proceedures - clean metal, tight fitting joints, fluxed joint - and you still can not get the solder to flow, then it could be your torch.
Andrew shows you where the sweet spot is of a flame and how to use this to your advantage.
THE EQUIPMENT I USE TO VLOG
Canon 70D, Body; tinyurl.com/j89xw2h
Canon Lens 10-18mm; tinyurl.com/gncnrwz
Tripod for Canon; tinyurl.com/hdhuz6z
Memory Cards; tinyurl.com/z8mhuk4
Card Reader; tinyurl.com/z97tccx
Microphone, Cheap; tinyurl.com/hbxtthg
Microphone; tinyurl.com/zpjpoeq
Canon G7X Camera; tinyurl.com/jkvu4b4
Tripod for G7X; tinyurl.com/z27m9aj
Mini Tripod; tinyurl.com/he93omu
Mavic Drone; tinyurl.com/jfh9da4
360 Camera; tinyurl.com/jbmrugq
Andrew shows you many hints and tips that he has gained from his experience as a professional goldsmith.
Andrew Berry, a professional jeweller for 30 years, is the training director of www.AtTheBench.com, an award winning on line jewellery training website.

Опубликовано:

30 янв 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@aliceryan3399 7 лет назад

I've never heard the process explained better or demonstrated as effectively! Thank you!

@markiestephens8741 4 года назад

This is by far the most helpful video about soldering I've ever seen. This answers all the frustrations I had upon past unsuccessful soldering jobs. I know after watching this that this is exactly where my issues are. My torch was not close enough to bring the piece up to temp to flow the solder - my slow and far away heating caused the solder to oxidize and just not flow - or I got so frustrated that I brought the torch in too close to where my seam was in the black hole of heat. I actually feel confident to try again - Thank you so much!!

@buckwildebeest398 Год назад

I know, right? this is a well-earned subscription.

@Austin1990 11 месяцев назад

I come from electronics soldering. While the idea of hearing the metal is the same, torches are very different from soldering irons. This video fills those gaps perfectly! Thank you!

@bettybho2168 5 лет назад

I have to say it pays to take the time to listen to these tutorials. I am usually in a hurry to see the jewellery being made rather than understanding the principals of how and why something works or doesn't work.

@Fiery25123 Год назад

serendipitously, this video came up just as I discovered this while fiddling about on my own! Haha, how fun!

@jenniferw1570 Год назад

I've got some experience from college classes and working for a high end goldsmith for years. I'm now enrolled in the diploma course at the London Jewellery Academy. I felt the need to refresh my skills, learn new things and get back into it. However, I find myself regularly going to your channel for the precise, concise and informative videos you offer that always help fill in the gaps I find from my online tutorials. Their instructors are great but I find your level of instruction and delivery of the necessary information a perfect addition and a reliable source of trusted guidance. Thank you, you rock and have helped steer many a project back on the right path.

@jonikq 5 лет назад

Seeing that black hole in the middle was the most valuable lesson in that subject. I can finally see what is going on in there, and what I'm doing wrong. Thank you!

@zalmanstorger4223 7 месяцев назад

Andrew thank you for these videos . They have been a great help to remind me how to do certain techniques and processes in making different piece’s.

@allanthompson9695 Год назад

I am watching a lot of these for the second, and some, third time, because that's what it takes for the information to go in, for me anyway. I'm brand new to this as you know, but interesting, the other day I was talking to a friend of a friend who is a jeweller with many qualificatios, and felt very comfortable talking about some techniques. She asked me where I had done my jewellery training. My friend, who had introduced me, laughed, because he knows I'm very new and done very little practically. I told her, my teacher is Andrew Berry At The Bench. Pretty Cool. Thanks Andrew. I must got on with more.

@rosesheehy8448 4 года назад

Thank you for this demo and showing the different size torches. Very helpful!!

@audreykerbow8938 3 года назад

Great explanation of where to find the sweet spot of the flame - thanks so much!

@Trapezius8oblique 3 года назад

This was terrific information, as usual. Thank you Andrew. So much appreciated.

@daintyanns41 2 года назад

I love how simple you explain things! And you show what you talking about not just describe it.

@johnagorman 2 года назад

excellent demo of flame focus. Wonderful how you show it. everyone can do this to test and learn. thank you

@Dharlanna 7 лет назад

What a valuable lesson. Thank you Andrew for sharing this!

@deloresgrant5805 5 лет назад

wonderful lesson...really am doing much better with my soldering. thanks for sharing your knowledge...

@wildysnow547 7 лет назад

Thanks for the tip, it makes it easier to explain. Was showing my son how to solder and this demonstration would help greatly.

@haririalaa6487 4 года назад

best jewelry's teacher....! thank you Andrew..! for your time and efforts..! keep it up.

@rebeccaedgar4131 3 года назад

So glad I found your channel, just starting out in jewellery making and your videos are clear, concise and informative. Thankyou!

@kevinprinceofdarkne 4 года назад

Just being told once was not enough for me and I don't suppose that it will be enough for most people, and when I get it right it still looks like magic. It's a good thing that you're patient and kind enough to repeat the basics a few times. So, thank you, Mr. Berry.

@lindawiedemann5014 Год назад

So glad I found you! I've tried a little soldering in the past, but it's so intimidating. Looking forward to getting it out again! Thank you:)!

@AtineaN 7 лет назад

Thank you for your invaluable tips. Learning so much from your videos.

@steveburch4164 3 года назад

Great, precise information. I am just starting out with soldering jewellery, so this presentation was extremely useful to me. Many thanks for taking the time to share your knowledge.

@linzey984 2 года назад

Thank you for thoroughly explaining the process of soldering with a butane torch!! I can't wait to make my first ring!! I got the Jeweler's Butane Torch from Eurotool. It looks a lot like the small torch you have there.

@wormemc 6 лет назад

Thank you so much. I am just starting and this information is invaluable.

@emel7898 7 лет назад

Very good instruction. You teach very necessary lessons in a manner that is easily understood. I really enjoy your videos and I've learned a lot from them. Thanks

@albertosantiago8019 5 лет назад

You are a great teacher. Thank you.

@judithwalker9694 4 года назад

You're a wonderful teacher! Thanks so much!

@brandimakes 3 года назад

That was so informative! Thanks! I didn't know there was a 'dead spot in the middle of the flame. Thanks, Andrew.

@johnagorman 2 года назад

best explanation of Soldering ever. Applies equally to electronics and i assume plumbing as well. highly recommended.

@alicerosa6766 6 лет назад

Thank you so much for this information. I have learned something new and very important . You are a very good instructor 👍👍.

@AlejandraRamirez-uo8cv 2 года назад

Love your videos! I have been learning lots! Thank you!

@kkey4700 4 года назад

Wow! Thank you for that very important piece of information! Very well explained and much appreciated. 👍😃

@georgeinglis255 6 лет назад

Thanks Andrew, great demonstration.

@paulgaines8435 2 года назад

Good clear instruction that gives results 😁 Thank you & Merry Christmas 🎄

@catherinemartina6469 11 месяцев назад

great info, thank you for your work

@amandacope9072 4 года назад

Love your youtube videos always lots of useful tips, you really make it easy to understand. Very informative

@soledadverduga6015 7 лет назад

Thank you ... I was wondering this topic exactly 👩🏻‍🏭... your videos are so useful 👍🏻👍🏻👍🏻👍🏻👍🏻

@phyllisdimartino531 5 лет назад

You are a great teacher

@TheOneTheyCallDean Год назад

Thanks for your guidance Andrew. 😊🌎✨

@seeagainh624 2 года назад

Such a clear explanation. Thank you

@brucekline2490 5 лет назад

Incredibly important information on what part of the flame to use and where to place it.Wish I'd known this years ago!Thanks so much for sharing.

@maudale Год назад

Thank you for sharing!

@buckwildebeest398 Год назад

great work, Professor Berry. My thanks.

@beads2yarn 6 лет назад

Outstanding video. Thank you

@daniellebiasutti9110 Год назад

Thank you! I spent so much time failing to solder a bangle. I managed in the end through trial and lots of error but I didn’t know totally what I did right. Watching this has taught me how to do it properly next time.

@HarmonicEnigma 2 года назад

You are such a great teacher! Thank you :)

@elisazulueta9535 Год назад

Thank you Andrew I was doing wrong heating directly the solder to flow, instead heating the metal ❤, appreciated your knowledge and expertise to help me to continue my hobby ❤

@saxon4065 Год назад

Thank you very much your video, extremely helpful. I don't make jewelry but do a lot of prototyping of special projects with stainless steel- very similar principals.

@johngardner1898 Год назад

The black hole remains the most interesting phenomenon in the universe! Thanks Andrew.

@norswoodsmandarylkorpela3296 6 лет назад

nice . thanks for the refresher course

@teperikaetr 3 года назад

Well explained. I love your videos.

@allancrow134 2 года назад

That's a worthwhile lesson on how a torch focuses heat. I did not know. Thanks. :)

@Omarvazcar1 6 лет назад

Thanks for this valuable information!

@jenniferarink2135 3 года назад

This is great information! Thank you!

@p42once1 Год назад

Well said. Very clear and understandable.

@jgrm4443 4 года назад

Thank you Sir. I am learning every additional thing I can while working from home due to COVID-19. (27 May 2020)

@simonpidgeon949 3 года назад

These videos are very interesting and, this has made it easier to choose a torch and , great tips about flame sweet spot , I’m going to purchase a max flame 🔥 butane torch as it has a larger flame , and it allows me to work o. Larger pieces and aneal larger projects , it’s more suitable for my needs .👍

@kornkobbler1 11 месяцев назад

Great info, thanks!

@DRMLbyJeffrey Год назад

Love the tips

@studioenvogue 11 месяцев назад

OMG I found a Welshman for this! I could not be happier!

@jasonbrown5263 2 года назад

Gotta love that sweet spot 😉 cheers Andrew

@lynnl6965 3 года назад

Super useful. Thanks so much.

@amymohanty1045 7 лет назад

Thanks again always helpful...

@mary-annkieckhaben5026 2 года назад

Thank you for your Tipps.

@rogerharris8081 3 года назад

From a retired music teacher, excellent instructional techniques!

@dougduncan9680 3 года назад

Great way to show! 👍

@CorruptDynasty 5 лет назад

Thank you!

@user-rt2mr9wn8b 7 месяцев назад

Solved my problem. Thankyou ❤

@mary-annkieckhaben5026 2 года назад

Thank you for shering i learning so much.

@SeattleRingHunter 4 года назад

Excellent explanation and demonstration on the use of these smaller torches for soldering. Cheers, #SeattleRingHunter

@maderzz1614 3 года назад

good edu with cool explain.thanks for this video🖒

@itailu Год назад

wonderful.

@esliet 9 месяцев назад

Excellent

@brendawhite243 5 лет назад

Very well explained. I think I know what I'm doing now! :)

@rosyhaddad5194 Год назад

You are the best 👍👍👍

@SophieKae 5 лет назад

Well said Andrew!

@Queen_Street_Sterling 4 года назад

I am SO grateful that you provide your expertise to us! This particular video really helps take the fear out of the flame for me. I have 3 stacker rings (my first project on my own) pickled and ready for their joints to be soldered. I have just failed at soldering the first two and watched this video before I attempt the third. Fingers crossed it will solve my problem. PROBLEM: Ring is getting bright red hot (I fear melting it), but the solder isn't moving (pallion form: hard). The pallion is stuck to the soldering block (literally lifts some of the block up with it when I pick it off). AFTER THOUGHT: The rings are hammered with slightly organic edges (not smooth/straight). Maybe there's a tiny gap between the solder and the ring? Should I try laying the solder on top of the join instead of beneath it? I'm open to anyone's answers, not just Andrew's. THANKS!

@dongdongdong8413 Год назад

thank you

@ivanilarionov1893 5 лет назад

Very well explained! Is a torch like the bigger one capable of melting gold/silver ?

@daintyanns41 2 года назад

Thisssssssss is the best!

@matildecanete4323 3 года назад

Hello! Thanks for the video. What brings for big torch you recommended? Thanks you!

@sherylfaul2287 7 лет назад

Hi Andrew, I really enjoy your videos and am learning a lot from them. I have 2 torches the same size as the ones you demonstrated. My larger one has started performing badly, it has a really blousy flame. I have tried bleeding and refilling it but still having issues. I have also read it is important to use high quality butane. I live in NZ and the range available is limited - so am using the best one I could find. I also cannot buy the large torch here, the one I have was from Amazon but they will no longer ship them to NZ. I would appreciate any other suggestions re getting my torch working again. It looks pretty clean and has not had a great deal of use - I was really happy with it so would love to get it working properly again. Thanks

@paliaga 7 лет назад

Hi Andrew, great tip! Something that helped me on knowing where that sweet spot you talk about on the video is is listening to the torch, when you put it too close (close to that "cold" black spot to appear) it starts making a sizzle, a louder sound. Normally, once i hear that I pull back until the sizzle stops and that is the tip of the cone. I hope it helps!

@tiffannystipe9626 3 года назад

You are very helpful. I watch many of your tutorials. Alas, I am so frustrated. I am trying to make simple copper jewelry out of copper. Bezels, bracelets, and the such. I am using 20 guage copper sometimes 18... I get the solder to melt into the groove, but after cleaning it breaks! Am I not getting the copper hot enough? Am I making the solder brittle with too much heat? I am uaing the small butane torch similar to yours and I would really appreciate your advice please.

@The_Cobalt_Lair Год назад

I’ve soldered many a copper pipe & fitting but haven’t soldered jewelry. I’m anxious to try jewelry.

@OakfieldDon 6 месяцев назад

Great video! I am learning a lot from you. So. You suggested I use paste and solder with a torch to weld 1mm Stainless Steel jump rings to Stainless steel rings. But, what kind of torch is best? Small or Large Butane? Or like a bigger hose torch with Propane? Thank You again.

@kathybradbury 5 лет назад

I just made my first attempt at soldering since my only other experience forty years ago! I learned something, but didn’t get the solder to flow- I think it’s because the mini torch I bought from HarborF-- lacks the strength to put out a decent flame. I got a different type that attaches directly to the can of butane, so hopefully that one will work! This video should be a great help as well! Thank you!

@leighshell1784 7 лет назад

Thanks, Andrew! Is the principle the same with acetylene/air torch? Any torch at all?

@joziradu7929 4 года назад

The Best ever

@shirleymason7697 7 лет назад

Oh yes....thank you, as ever.

@frixux 2 года назад

Thanks Sr is any big torch with tinny adjust

@brittanydemarco2247 3 года назад

Hello Andrew, is it possible to solder a bezel onto a backplate with a butane torch? I’m having trouble with it. I’m probably not heating it properly but just wanted to see if it was even possible or if I would need a propane torch?

@lindseyernst1849 Год назад

Hi! What is your working time for the large butane torch, such as how long does the cylinder last before needing a refill?

@TheFoulblood 2 года назад

Learned from trial and error while blowing glass, wish i would have seen this a year ago😂

@ThePurpleHarpoon 2 года назад

I have the soldertec. I got it to make smoked cocktails. The problem I have is maintaining a steady flame when pointing the flame straight down. Any advice?

@kevorka3281 4 года назад

Thanks, I was thinking the closer it is the hotter it must be, interesting how that works.

@maurakelley616 2 года назад

Hi Andrew, What torches are you using here, and which do you recommend for sterling silver?

@louschmiz5605 7 лет назад

Wich jewelry surplus shop do you use?

@adamvega3299 3 года назад

Question. I can not find the borax flux you always mention. what I see is a crucible and melting borax powder form. does it matter if it says for melting metal. soldering. and crucible? I'm trying to make a jump ring bracelet in the process of soldering each one. any tips. and also which butane is very effective to use that's not harmful