Using a dremel to polish polymer clay

Подписаться 29 тыс.

Просмотров 32 тыс.

50% 1

Here I used my dremel 4000 to buff my polymer clay. Such an easy and not too scary way to achieve a great shine. Below is the link on Amazon for the buffing wheel set I showed. Hope this helps
PHYHOO Polishing Buffing Wheel Set Cotton Little Buff Wheel for Rotary Drill Tool Dremel Accessories Watch Jewelry Polish Buffer Kit 3mm Mandrel 40 Pieces
by PHYHOO TOOL
Learn more: www.amazon.com...

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@KathleenRenninger 4 года назад

Thanks so much; helped me to make a decision. Also thanks for the link to those buffing wheels; a must-have, I'd say.

@sage9836 3 года назад

This is great. I have admired your amazing pendants and am learning basic techniques. I figure if I am going to put this m7ch technique into making pendants, I want them to have a super smooth shine. BTW, I like the sound your pendants make when you set them down, a quality sound.

@joyceengland3947 5 лет назад

That is really beautiful and I also hope you do a tutorial on it. Good luck on downloading. What a pain! All good info and thank you.

@Naturally336 3 года назад

You can now get 1 or 2 inch wet dry sanding pads for hand sanders. Just get the correct size shank and adapters, most dremel are 1/8th. 60 to 10,000 grit. such a time saver!

@robinlong3652 3 года назад

Do you have a link for these! This sounds so much better than hand sanding! Thank you!

@katiegordon610 3 года назад

Most my stuff is on the Amazon link In the description

@Naturally336 3 года назад

@@robinlong3652 the dremel sanding attachment and pads can be found at www.amazon.com/gp/product/B083K3ZKR1/ref=ox_sc_act_title_1?smid=A3LRKDXYVQDRR3&psc=1 not necessarily recommending that particular one! just an example of an option and how to find it. :)

@alaskalandscape Год назад

I have been looking for these!

@MakeupMobster 5 месяцев назад

Wow those came out beautiful

@Seabreeezy Год назад

Thank you! Very helpful 😊

@alaskalandscape Год назад

Thank you so much. I have issues with sanding but would do a little wet dry in combination of buffing and resin. I am not seeing the link in description for the buffing attachment you recommended.

@heatherorr2116 Год назад

Thanks Katie

@Sooz3112 4 года назад

Very helpful, thanks x

@jodyb1905 Год назад

Where do you get different grits for the dremel? I have a 3000 but Dremel doesn’t show what the grits are on the bits, and they seem way too course. They don’t sell 400-1200 which is good for clay…

@katiegordon610 Год назад

Amazon I found my pack quite a few years ago now

@jodyb1905 Год назад

@@katiegordon610 Wow- I didn’t expect an answer since comments are so old! I got a set online and followed instructions but first try the shaft bent. I think it was too long. I’d really like to no longer sand and buff by hand and have been looking for answers online when I found you. Perhaps my set is just not the right one…

@PatriciaBearden 5 лет назад

Question for you, Katie. Does your buffing pad fling little strings all over when you first use it? I got some, but the material flings little strings everywhere.

@katiegordon610 5 лет назад

The ser comes with two an orange which is slightly coarse I use that right after sanding followed by a white finer I use after that only like the first time does the white one but the orange is not really bad compared to others I've uses

@PatriciaBearden 5 лет назад

@@katiegordon610 Awesome. I saved your link for next time I need some, I'll try them.

@DebbiePike77 3 года назад

I have the 3000 dremel. It is hard to sand smooth the way the sandpaper is turned on objects that have grooves and petals.

@katiegordon610 3 года назад

Ya I don't sand w my dremel at all

@DebbiePike77 3 года назад

You just use the buffer I see? I am going to try that to. It came with a buffer but not sure this is the right one.

@katiegordon610 3 года назад

I show what I do I'm alot of my pendant videos I sand either by hand or w the sander I've shown then buff I don't use the one that came w my dremel its too coarse

@DebbiePike77 3 года назад

@@katiegordon610 I use the cheapo nail files a lot too.

@lifeisgood7740 3 года назад

When you put the Renaissance wax on it, how do you make it shine? Polish cloth? Thank you.

@katiegordon610 3 года назад

I dont really use the wax but buff w a cloth or a buffing wheel im sure there's tons of ways to do it

@beejayem42 4 года назад

Hi Katie I have a question about the Dremel you have. Do you use specific Dremel sanding discs or can the machine take generic brands. I have jus bought a Dremel micro but can only get course grits. Appreciate your reply if you can. Thanks

@katiegordon610 4 года назад

Responded to this question u asked on my fb posted a pic of what I have for my normal dremel 4000 so check that

@EmandM96 3 года назад

Hi! Sanded same grits, wet/dry but seems to leave a white residue with tiny scratches still! Driving me crazy, any tips? Thanks!!

@katiegordon610 3 года назад

Hum maybe your brand is too coarse or clay is softer or something never go lower than like 400 but if u see scratches start 600 or 800 and go as high as u can go 1500 2000 2500 3000 4000

@katiegordon610 3 года назад

Scuply 3 I remember scratches easily but it also breaks easy thats why I don't use it

@LetsgowithMio 5 лет назад

Hi! This video is very helpful!! I just have a Dremel, I cant find sand drum like 600 or more. Do you have a link for the drums? Or you have a way to use sand paper with dremel? Thanks a lot!

@katiegordon610 5 лет назад

www.amazon.com/dp/B07CYQXZSY/ref=cm_sw_r_cp_awdb_t1_FeSyDb1N7ND1N These dont go super finei use them if I need gross removal of clay but other than that I hand sand then buff w the buffing wheels

@zanemaingot9690 4 года назад

What polishing compound did you use?

@katiegordon610 4 года назад

Nothing just my orange and white wheels on my dremel after sanding

@rterry2752 3 года назад

Its a collet.

@Sooz3112 4 года назад

Is it a Collet or a Chuck? x

@katiegordon610 4 года назад

On dental instruments we call it the chuck the part that grips the bur but prob depends on your region like I call it braid your hair and some say plat your hair

@Sooz3112 4 года назад

@@katiegordon610 Thank you.. I'm live in England, we call it a chuck 😀. I may buy a Dremel as I think it'll help. Thank you x

@jenniferhackbarth7259 4 года назад

Katie, I cannot find the link.

@katiegordon610 4 года назад

The link to what

@katiegordon610 4 года назад

My Amazon for the buffing wheels Amazon products I've ordered FOR USA ONLY at this point # commissions www.amazon.com/shop/katiegordon?ref=exp_inf_sh_mb_own_katiegordon_cp