USING D-C FIX TO WRAP SHAKER KITCHEN DOORS

Подписаться 8 тыс.

Просмотров 547 тыс.

50% 1

USING D-C FIX TO WRAP SHAKER KITCHEN DOORS
Here’s how I wrapped my shaker cabinet doors using d-c fix wrap. Please note that you do not need to remove the existing wrap on your doors - mine were peeling off so I removed them before starting with the new wrap.
There are other methods to do this - this is the method I used and found the easiest.
Colour used - light grey
*Wrap and tools used - amzn.to/3vSkZ0c
To see the finished product in my kitchen check out my other videos below.
---------------------------------------------------------------------------------------------------------------------------------------------------------
+ SOME OF MY OTHER VIDEOS +
📍 Kitchen Renovation Part 1 - • KITCHEN MAKEOVER | HOW...
📍 Kitchen Renovation Part 2 - • DIY KITCHEN MAKEOVER |...
📍 Paint or Wrap a Kitchen - • Should I Paint or Wrap...
📍 Bathroom Renovation - • DIY BATHROOM FITTING |...
---------------------------------------------------------------------------------------------------------------------------------------------------------
+ ABOUT ME +
I'm Laura - I'm a single mum to a teenage daughter called Alyssia. I love DIY and getting creative around the house. If you like interiors, renovations, room makeovers, lifestyle, hauls and vlogs then hit subscribe, ring the bell and follow my journey!
Thanks so much for watching this video 😊 You’re awesome!
---------------------------------------------------------------------------------------------------------------------------------------------------------
+ LINKS +
*Wrap and tools used - amzn.to/3vSkZ0c
---------------------------------------------------------------------------------------------------------------------------------------------------------
+ SOCIAL MEDIA +
📸 Main Instagram - @laura.does.life - / laura.does.life
📸 Home Instagram - @thisoldsemi - / thisoldsemi
📌 Pinterest - @lauradoinglife - www.pinterest.co.uk/lauradoin...
🎥 TikTok - @lauradoeslife - / lauradoeslife
---------------------------------------------------------------------------------------------------------------------------------------------------------
+ Email +
For business enquiries/collaborations
📧 laurasdiylife@hotmail.com
---------------------------------------------------------------------------------------------------------------------------------------------------------
*Links may be affiliate links. Should you decide to click and go on to make a purchase, I may make a small commission on the sale. This doesn’t alter the cost of the product to you but helps supports the channel.

Хобби

Опубликовано:

31 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 295

@LauraDoesLife 4 года назад

If you’d like to see how this product has held up over 11 months check out my update video where I also respond to some FAQs ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KOSUQZx-Zvo.html thanks for watching 😊

@njs381 3 года назад

Hi Laura, really helpful video firstly so thank you! I wondered if you’ve had any experience with wrapping like this where the cupboard grooves are curved at all? My Mum is looking to do hers but the groove pattern on the door is arched at the top. Would love to know your thoughts? Thanks 😊

@LauraDoesLife 3 года назад

NJS I haven’t done a curved groove before myself but this would definitely require a heat gun/hairdryer if it’s the type of door that I am thinking about. I would say basically any surface that isn’t flat, place the wrap in position on the flattest part of the surface and then use heat to mould around any curves using a squeegee or small tool to push into place. I hope that helps 😊

@njs381 3 года назад

Laura Does Life Thanks very much Laura that’s great 👍

@elwirakomor2359 2 года назад

Thanks so very sweet and we will have dinner

@beingbillie1129 4 года назад

Looks super good! I love how precise you were...others get in a hurry ....your patience shows.

@elysebradley 4 года назад

Oh my gosh!! I am SO HAPPY and reassured in knowing there is someone else in the world like me! I have used contact paper/peel and stick paper to do everything from room borders, cabinet refinishing, cabinet repurposing, or for a general change. Attention-to-detail is SO WORTH IT!! ❤

@LauraDoesLife 4 года назад

I want to try doing some other bits around the house to see what I can transform!

@janetcrane59 4 года назад

This is my worst nightmare. I commend you for finishing the project. I would have had a meltdown.

@gracethroughchrist4949 4 года назад

Exactly.. If I did this, I'd be slamming my head in a doorjam repeatedly after one cupboard door. 😂 But kudos for having the patience for this!

@denisepfahl3147 4 года назад

@@gracethroughchrist4949 Pure torture for me!

@butchieees1783 4 года назад

Denise Pfah

@melaniejane384 4 года назад

Why is everyone telling her to paint her doors? She doesn't want to paint them, obviously! Go watch a painting video!

@kf5541 4 года назад

Melanie Jane lol you’re 100 % right

@Sarah-m17 4 года назад

who says then why watch

@maureenhansen3308 4 года назад

sarah people watch to find out if another method is worth doing.

@Sarah-m17 4 года назад

who says waste of time, could be doing something else, dumb question, maybe some people rent and can’t paint that’s why they do this

@Sarah-m17 4 года назад

Maureen Hansen she could’ve watched a shorter video if she was that bothered

@carbonerd5935 2 года назад

I’m even too lazy to unscrew the doors to do this..your patience is awesome and it makes the result perfect!!!

@raros5475 4 года назад

When my daughter told me she was having her counters and cabinets wrapped, I pictured saran wrap lol, I didn't understand. But my son in laws niece did it for them, and they turned out gorgeous! They look like new cabinets and countertops.

@LauraDoesLife 4 года назад

It’s brilliant isn’t it? Perfect for people who rent too and aren’t allowed to paint 😊

@nuklearpuppy 4 года назад

Amazing . I unfortunately do not have that level of patience but brilliantly executed

@tresseshairextensions7237 4 года назад

Big Digits neither do I and I’m sure there would have been only one door completed and perhaps not done very well. 🤷🏾‍♀️🤦🏾‍♀️😂

@llc1976 4 года назад

Cool! I would never have thought of trying this! It looks excellent!

@lisaLisa-ul7gs 4 года назад

This is brilliant! So much easier to wipe clean than paint. Paint eventually chips. Genius!

@LauraDoesLife 4 года назад

Exactly! I think I would have been repainting by now if I’d have used paint. I love this product I think it’s great. Thanks for watching 😊

@eisazaki 2 года назад

Thank God I have found your video and it is so much helpful I have been thinking to do this for so long but wasn’t too sure if it’s gonna work or not but I am glad it is actually a good idea.

@suzannedu419 4 года назад

This is a fantastic idea. You did a great job. For those naysayers who'd rather paint I say go with this instead. I've painted and it's a pain and it's messy. Nice thing about this is that if the vinyl peels away, it can easily be fixed.

@LauraDoesLife 4 года назад

Thank you Suzanne ☺️ exactly! I’d have been constantly touching up if it were paint. Although I’ve probably done this the long winded way, by doing it in strips if there is any damage caused I can can just peel and replace that particular section

@Raythejellysnake 2 года назад

U did such a good job! Love these cabinets, looks way better than paint imo, more professional!

@susanmurphy2360 4 года назад

That is so good you done a wonderful job!

@carlarthur4442 3 года назад

My wife did it with our kitchen tops if you take your time with it , it can transform your kitchen, well done great idea .

@karlchristophersen631 2 года назад

I'm really impressed by your skills and attention to detail.

@BB-gx7gc 3 года назад

What an excellent job you have done on the doors. Well done

@TheShonuff888 3 года назад

Good video, I actually started with the middle first and found it easier

@marleneolson3008 4 года назад

It’s funny, I just bought some glossy white vinyl to do my cupboards (haven’t even received them yet) and I stumbled across this video. What great timing. I am almost finished with my kitchen countertop, which I covered in a glossy, glittery black. Fortunately, my cupboards are straight with no insets or even hardware so it should be fairly easy. I bought black handles for the cupboards and drawers. My cupboards won’t be as difficult as yours but this video is so helpful - thank you!

@LauraDoesLife 4 года назад

Flat doors are super easy! It’ll look great when it’s finished off you’ll be amazed at the difference when you’re done. Thanks for watching ☺️

@ohmercy5924 2 года назад

Excellent job! Thanks for a great tutorial. It looks so good.

@lisarogers5873 3 года назад

Looks really good. Had no idea this was an option. I doubt I could make it look that nice. I have a hard enough time using contact paper on shelves! LOL!

@ivanantich440 4 года назад

Absolutely stunning 🥰

@s.k6384 4 года назад

I vinyl wrapped a few parts on my truck one time. No way I could torture myself with a project like this. Looks great though, good job.

@alandmcleod5988 4 года назад

you are very clever. Very meticulous work

@reade4322 4 года назад

Girl you have an ASMR voice. This was so relaxing to me. 😂

@LauraDoesLife 4 года назад

Haha really!? Glad you enjoyed! Thanks for watching ☺️

@paulinedean175 4 года назад

Looks brilliant you’re clever 🦋

@LauraDoesLife 4 года назад

Thank you Pauline thanks for watching ☺️

@Imaginexall 2 года назад

I can't thank you enough for this tutorial. I have the EXACT same doors and was wondering how I could put sticker onto them with a nice result.

@taracherkas6481 4 года назад

My extended family pained theur cabinets and a top coat of poly and let me tell you~ It not only LOOKS AMAZING. But it actually looks like BRAND NEW cabinets! WORTH all the time and they did change out the handles for a new updated look. Which added to the project looking BRAND NEW!💖💚💖💚💖💚💖💚💖💚💖💚

@caroljackson4093 4 года назад

You did a splendid job. I’m very impressed 👍🏾!

@LauraDoesLife 4 года назад

Thank you Carol 😊

@pierreandrada5920 4 года назад

Looks great! Might try on my garage cabinets for practice.

@LauraDoesLife 4 года назад

Once you get the hang of it it’ll be easy to do! Good luck and thanks for watching ☺️

@inthelifeofava4349 3 года назад

Amazing vid, have been wanting to do this for a while now, best vid I’ve seen to date on applying vinyl to kitchen doors etc xoxoxo

@LauraDoesLife 3 года назад

Thank you Ava I’m glad you found it helpful x

@katehinds6167 3 года назад

Thank you so so much! I have exactly the same cabinet does as you and i couldn't work out how to get the vinyl wrap on the middle bit. Got totally frustrated. Its so obvious after watching this!

@LauraDoesLife 3 года назад

You’re very welcome! Were you trying to do it all in one piece? Good luck I’m sure it’ll look fab x

@khatijakay4107 3 года назад

Looks amazing and so professional

@drdoolittlefishhobbyist6055 2 месяца назад

What a super job. Could have done with you to help me do mine. Wow you need some patience for this x

@fionaritafox9713 2 года назад

I did my with Wilkos it looks really good too. Well done 👍

@pattyraczynski9566 4 года назад

Great job! Although, not my cup of tea...I admire you for your persistence and patience...enjoy!

@LauraDoesLife 4 года назад

Thank you 😊

@P0cketfull0fsunshine 6 месяцев назад

such a useful guide, thanks so much for this detailed demo. Subbed!

@nicoleshupe2313 4 года назад

You did a beautiful job. It looks awesome.

@LauraDoesLife 4 года назад

Thank you Nicole 😊

@karenbaldry8096 4 года назад

Omg that looks fantastic well done. Bet you £20 there would be a lot of bad language if I were to attempt this😂 you make it look sooooo easy ❤️

@LauraDoesLife 4 года назад

There was definitely some bad language from me too 😂

@jaccroft 4 года назад

Wow absolutely brilliantly patient !! I'm doing mine 👍

@LauraDoesLife 4 года назад

Good luck with yours!

@jaccroft 4 года назад

You should definitely take it up as a thing . You are brilliant at DIY . I've checked out your other videos . Keep them coming ! I've now subscribed 😊

@ladybird480 3 года назад

Beautiful job

@220274mark 3 года назад

Well there you go. You surprised me. Awesome.

@silverfox8801 4 года назад

Nice job young lady 👍👍

@007kash007 3 года назад

such a helpful video. thanks for making it and so clear.

@LauraDoesLife 3 года назад

You’re very welcome 😊

@MaureenKunyu 4 года назад

You did a great job

@lauranapoli4893 Год назад

fabulous job!! i have shaker cabinets without the little gaps, should i do the same process? thank you

@TooJubeJM1 4 года назад

Looks really good, but you have such patience! I’m not sure I have that level of patience to do this as well.

@LauraDoesLife 4 года назад

Yes, it does take time. Thankfully I didn’t do it all in one day otherwise I’d have probably given up! Thanks for watching ☺️

@missymandab2695 3 года назад

I helped my son do this to his kitchen but we put 1large piece tightly over the doors and then used the hairdryer to heat it and pushed the vinyl into the groves which is so much easier and actually is on the instructions it can be heated

@LauraDoesLife 3 года назад

Hi Amanda, one piece only works with certain types of doors - these type needs the strips because it doesn’t stretch out far enough to cover when heated

@EbonyGirlSpeaks 4 года назад

Really nice!

@daciasdiy1861 4 года назад

Oh yes ! I love it

@kinross24 4 года назад

When I was trained by DC Fix you were supposed to use aspray of water on the surface first,then lay on the vinyl and squeegee out the bubblesand water. The water lets you move or remove the vinyl before final flatten.

@LauraDoesLife 4 года назад

Thanks for the tip Glen I will try this the next time!

@sean4chels 4 года назад

Spraying water on bare mdf is not advisable as it soaks it in then swells.

@ailwyngregory1716 Год назад

Never spray water on bare MDF and to stop those lifting bits/bubbles on corners use some 3M primer 94…

@estherb822 4 года назад

Wow! 20 out of 10 for this!

@melm2740 3 года назад

Spot on,👏👏👏

@TheRestorer 4 года назад

Hello colleague! Good job!👍😉

@martymccann2921 4 года назад

Hi Laura That Looks Amazing and your Kitchen looks Fantastic and looks a really good job keep up your good work👍👍👏👏

@martymccann2921 4 года назад

Can't wait to see more of your uploads 🤞🤞

@katek6306 4 года назад

These look amazing, if I did this to a cabinet that had been painted with a roller , will I see the texture through the vinyl ? Also how well does this vinyl clean with everyday messes ?

@LauraDoesLife 4 года назад

It cleans really well. It’s a decent thickness, I would think it would cover although you’d probably be more likely to get air bubbles if not completely smooth surface

@chasdiy7799 4 года назад

Thanks for the video Lauren, really well done. I have not used this product but I have plenty of similar experience. I would think that the paint or any other embellishment would show through, the product is very thin. You would need to sand down first to get a perfectly smooth surface first.

@in5592 2 года назад

My Goodness no way I would have this amount of patient doing this

@jaccounts4659 4 года назад

Impressive thanks

@8730sarah 4 года назад

Ive seen this done before but they cover the whole front with wrap and use a heat gun to push into the edges and sides..much easier than cutting strips

@Cassiew168 3 года назад

Can you find a the video where you have seen this before? Would be interested to try and find a way to save time

@Venustrial 4 года назад

Thanks for this video. So helpful!!

@w6263 4 года назад

Much appreciated for the video! Is less money spent on door panels!

@poshpaul55 Год назад

Hi Laura i Here because my wife want's Whole Kitchen wrap ! and i never done any thing like this before LOL Wish me luck

@ntomenicgiorgo3598 4 года назад

Beautifully and practical! the vinyl wrap too ;-)

@LauraDoesLife 4 года назад

Thanks for watching ☺️

@lem4100 4 года назад

It came out beautiful but I wouldn't have the patience to do this. Wish I did!

@LauraDoesLife 4 года назад

It did take a while but was worth it! Thanks for watching 😊

@iamcuriouslykate 2 года назад

Can I ask what kind of glue you used for the bits that start to peel up? I've done it on the same doors and a few bits keep popping up a few months later.

@user-js6mr1wy3v Год назад

❤❤❤ it. Thank you

@robertprice26 11 месяцев назад

£5! That’s incredible. Especially since companies that do revamps with new doors will charge 100 times that. I still don’t know why kitchens are so costly since they’re just chipboard boxes. Thanks for the video

@mansady1963 4 года назад

tq laura

@fuchsmom Год назад

How do you work out with a rounded panel?

@river1927 Год назад

If you very so slightly plane the underneath of the door first this will stop the vinyl from rubbing against each other and coming away a few months down the line, keeping it looking like new

@yonimassages 2 года назад

How long would you expect vinyl to last before it needs redoing?

@karlnorman2427 4 года назад

Bearing in mind that's a newly made door it's far easier wrapping components pre assembly.

@ianblackman2144 4 года назад

Very nice work

@LauraDoesLife 4 года назад

Thank you Ian!

@ianblackman2144 4 года назад

@@LauraDoesLife my pleasure

@northenpicker86 4 года назад

Looks amazing, how long did it take you to wrap the whole kitchen? Thanks

@LauraDoesLife 4 года назад

I did it a bit at a time, so I’d say you could do a whole kitchen in a day easily. I took my time for this video purely for demonstration purposes. Once you’ve got the hang of it it’s less than 10 minutes per door. Flat doors are obviously a lot quicker and easier to do too 😊

@AiBilly Год назад

Is this cost effective to do a whole kitchen in my RV?

@tribalm0nkey 3 года назад

You little belter! Obviously talking about the video 😂😂👌🏽👍🏽

@TSmith72110 4 года назад

I know this isn't what the video was about but I absolutely love your accent.

@LauraDoesLife 4 года назад

Thank you, I don’t get told that very often 😂

@khatijakay4107 3 года назад

I want to do this to my bedroom cupboards that have a thin strip of wood around them, wonder if it’ll be the same process

@LauraDoesLife 3 года назад

If there is only a thin strip on the edge you may able to do them in one piece rather than in strips depending on the thickness of the strip 😊

@cameronseaward4949 4 года назад

That looks great! Can you wrap existing factory wrapped doors or do you need to rough it up with sandpaper? Also, how is it beside heat, i.e., the oven?

@cameronseaward4949 4 года назад

Btw, the doors have a slightly contoured grain pattern.

@LauraDoesLife 4 года назад

You can cover over existing wrap, there is no need to sand down. Just make sure the surface is clean. An existing grain shouldn’t show through as dc fix is quite a good thickness. It’s holding up really well around my oven so the heat isn’t causing any damage, I think it is heat resistant up to a certain temperature. Hope that helps. Thanks for watching 😊

@voiceofhislove8650 4 года назад

Question for you since this looks like such a good idea. I am very patient and like detailed work....but....I have intricate crown mold at the top of my kitchen cabinets that have a fancy rope/braid pattern on it. Would this vinyle take on that shape? My concern is if I can do all of the cabinet and doors with the available white of this material, but have to paint the crown mold on the cabinets, it might look odd (painted surface and color difference side by side with the wrapped doors). I would have to be able to wrap the crown mold in order to match the color and finish. Love to hear back from you on this!

@LauraDoesLife 4 года назад

Hi Donna, if you have the patience it should work but l would definitely recommend using heat on it with a hairdryer and probably use something like a cotton earbud or orange stick to push the vinyl into place into the crevices on the moulding. Lay the vinyl over the top, turn on the heat and push into place. Would also only recommend using the Matt finish not the gloss. The gloss is much thicker and harder to work with but the Matt should go on fine, it will probably just take a little bit of practice. I’d remove it from your units too if possible so that you can sit at a table whilst doing it ☺️

@voiceofhislove8650 4 года назад

@@LauraDoesLife Thanks!

@setdetnet5001 4 года назад

Hi. Nice vid. But please can you tell us what the EXACT DC Fix product is, that you used. They're different types. How about a link to the product?

@LauraDoesLife 4 года назад

Hi, I used the deign folie self adhesive film in light grey (seidenmatt hellgrau). www.diy.com/departments/d-c-fix-plain-matt-grey-self-adhesive-film-l-2m-w-675mm/4007386341068_BQ.prd?rrec=true

@MsKellouise 4 года назад

How long does the wrap last, is it quite secure? Trying to figure out if I should do something like this or paint!😊

@LauraDoesLife 4 года назад

Kelly Morgan so far it’s holding up well but it’s only been on a month or so. I would say if you are going to paint then make sure you put a varnish over the top so that is more durable when wiped down. The wrap is easy to clean but I would say keep some spare in case you need to make any repairs further down the line. I scratched some of the cupboards when I was fitting new worktops but was easy to fix with a new piece of wrap. Have you seen the full completed kitchen with new worktops? Budget Kitchen Renovation | Kitchen Makeover | Part Two ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XomXRmf4QYU.html

@alexandermchendrie4256 4 года назад

Vinyl will last 10 plus years if looked after

@mrsdewhurst2317 4 года назад

Well done I’m tackling mine as it’s all peeled off. What shade of colour Is this please

@LauraDoesLife 4 года назад

It’s a light grey - sedenmatte hellgrau is the colour that was on the label I think

@CarspotterG 2 года назад

How long did it take you?

@visionoftruth6860 3 года назад

If you remove after a while, would it damage or peel off any paint work that may be underneath?

@LauraDoesLife 3 года назад

Possibly would peel off paint if it was already chipped or peeling but I would think it would be pretty safe on most surfaces 😊

@JulieAmanda-yp9ci Год назад

You are brilliant atdiy from Julie

@ashleighjxo 4 года назад

Where did you get your vinyl from for this? Haven't seen this colour with dcfix x

@LauraDoesLife 4 года назад

I got this from b&q. On websites I think it’s listed as light grey but the colour on the pack is called sedenmatte hellgrau or something like that!

@annemariedoherty1745 3 года назад

Hi im curreny doing this at the moment.ive came across a few small bubbles as im doing it which ia annoying if any tips?x thanks

@LauraDoesLife 3 года назад

Hi Anne Marie - bubbles are easy to sort, just get a small pin or needle and prick into the top of the bubble then go over with the squeege and they should come straight out! If you’re getting a lot you maybe be working it too fast, try holding the wrap up off the surface and only let it touch the surface when you are ready to smooth over with the squeegee. Hope that helps! 😊

@denisepfahl3147 4 года назад

I have never heard of wrapping a cabinet door! Too much trouble for me, would rather paint it. You must be a "detail" person and I admire that. I am a "big picture, design it" person; let someone else execute it! My hubby is a fine artist, sign letterer/free hand and can do anything skilled with his hands...he once watched me wrap a gift and said, "you wrap that like a drunken sailor", LOL!

@LauraDoesLife 4 года назад

Lol, it does take patience, I’m currently wrapping another set of doors and certainly don’t seem to have the same amount of patience this time around! Thanks for watching ☺️

@denisepfahl3147 4 года назад

@@LauraDoesLife Good luck, you do a beautiful job with detail work. Sometimes I have to take a break and plow back in later when I have more focus and energy on demanding projects.

@elizabethezell8749 4 года назад

Is this not contact paper ? If it is you don't want me to do this , me and contact paper does not mix I tell you did a fantastic job!! Come do mine 🤗

@LauraDoesLife 4 года назад

Yes contact paper! It just takes practice, once you’ve got a couple of doors out of the way it gets easy!

@msanng1107 4 года назад

I’ve painted cabinets and this looks less tedious actually definitely less messy and less steps

@LauraDoesLife 4 года назад

Definitely easier! Painting would have taken priming, 2-3 coats and a few coats of varnish. I like the finish with this too! Visible brush stroke would have driven me crazy!

@cheechee7890 4 года назад

Lol. When U said air bubbles at first I thought u said herbivores. Obviously my accent is different then yours. By the way, your cabinets are beautiful. You’ve got great attention to detail

@LauraDoesLife 4 года назад

Lol thank you CheeChee! RU-vid’s subtitles struggle with some things I say too! Where are you from?

@judyweeks1480 4 года назад

Love the video! Hope you are feeling better. Poor woman sounds like you have a bad cold or you are very tired...

@LauraDoesLife 4 года назад

Thank you Judy it was probably a bit of both at the time of doing the video!

@gingerblack4528 4 года назад

I have bar high table and a 6 cub storage unit (Target) in the corner of my living room. I would like to make them the same color in a wood finish. Problem: table has beveled edge and a circular edge in front!!! Any ideas.???

@LauraDoesLife 4 года назад

Bevelled edges are slightly more difficult, definitely use a heat gun or hairdryer and cut the edges so they bling at the fold. Maybe also cut separate pieces and try to join them?

@gingerblack4528 4 года назад

@@LauraDoesLife do you have any videos on that procedure. Can I use a hair dryer?

@clifford7171 4 года назад

if u overlap edges u can double cut so it's leaves no gaps

@LauraDoesLife 4 года назад

As I was doing the full kitchen I realised this I should probably do an updated video!

@Jellybellyirish 4 года назад

What do you mean by double cut?? I really want to do this right 🙂

@doyen86 4 года назад

Can't find the color. Do you have a link to the product that you used?

@LauraDoesLife 4 года назад

I think this is the one. I had purchased in store at B&Q www.vinylwarehouse.co.uk/45cm-d-c-fix-matt-light-grey-sticky-back-vinyl-200-2020-from-1m-to-15m-12316-p.asp

@gingertk429 4 года назад

how long does this wrap last, has it peeled off yet on the edges

@LauraDoesLife 4 года назад

No it’s not peeling yet, I’d say you’d get a few years out of it definitely. If you can master doing it in one whole piece rather than in sections like I’ve done her then I’d say you’d probably get longer out of it!

@fionasablo7995 4 года назад

Where can I buy the D-C Fix Vinyl Wrap? Is it sold in USA?

@LauraDoesLife 4 года назад

I’m not sure if you can buy it in the US - I know that there are people who sell it on Amazon, but it’s more expensive than what it is in stores. There are other sticky back plastics that will do exactly the same job on Amazon, I’m sure there will be some that ship to the US - thanks for watching 😊

@vltruane 3 года назад

I like the little red Honda brand ruler. Where did you find that? I’m in the US, I did a Google search, and it doesn’t appear anywhere at all. Cool piece. Lovely work by the way.

@LauraDoesLife 3 года назад

javie793 thank you. No idea where the ruler is from it just appeared in my tool box one day 😊

@vltruane 3 года назад

I’m a big fan of Honda Formula One Racing, that’s why noticed it. I would clean the plaster, or paint that’s on the edge, it seems like it’s a rare little item. Love you’re videos. Take care.😊✌🏻

@luv2cre84 3 года назад

I’m a little late to the party but wow, I didn’t even know this was a possibility! You did an absolutely fantastic job! I live in an older home in the historic district of town and our home has all the original woodwork, trim, hardwood floors, stain glass windows, etc., and they’re all really beautiful. However, the dark mahogany color of the woodwork/trim really limits our options for trying new wall colors. I’ve always wished we could somehow change the color of the woodwork without actually painting over the original...can’t imagine ever doing that. So after seeing your video, I’m now wondering if something like what you used would make this a possibility...🤔

@LauraDoesLife 3 года назад

Yes you totally could cover over the woodwork! I feel the same sometimes about painting woodwork this product does peel off and doesn’t cause any damage. It’s a lot quicker and less messy than painting too! ☺️

@luv2cre84 3 года назад

@@LauraDoesLife Oh my goodness, I can’t tell you how much I appreciate your reply!! I really think I may try this out! Thanks so much again for such an excellent video and tutorial!🥰