No video :(

Using Sony's FX6 with the NINJA V PRO KIT & NINJA V+ PRO KIT - what codec to choose

Подписаться 32 тыс.

Просмотров 23 тыс.

50% 1

Join Alister Chapman Sony ICE and founder of XDCAM users as he goes through using the NINJA V PRO KIT and NINJA V+ PRO KIT with Sony's FX6. Alister discusses the variety of codecs available on the NINJA V PRO KIT and NINJA V+ PRO KIT including the recently added H.265. He explains what scenarios are best for the different codecs you can choose from. As a Sony camera expert Alister delves into how to set-up the FX6 depending on your codec of choice and what you are going to shoot.
Video Chapters:
00:00 - Introduction
00:37 - Expanding the NINJA V and NINJA V+
01:13 - Choosing the right SSD drives
01:28 - Update the firmware
01:44 - How to purchase & activate the SDI Raw licence
02:47 - Using the NINJA V or NINJA V+ with the Sony FX6 or FX9
04:29 - The H.265 codec
05:05 - Recording ProRes RAW with the FX6 & FX9
07:20 - Monitoring options & waveform levels
11:09 - ProRes RAW post production
11:32 - Transcoding using FCP
12:15 - Using ProRes RAW in FCP
12:42 - Using ProRes RAW in Premiere
Alister Chapman:
_____________________
For more information about Alister Chapman:
Website: www.xdcam-user...
RU-vid: / ingenioustv
Twitter: / stormguy
Facebook: / alister.chapman.9
_____________________
For more information on the NINJA V PRO KIT head to: www.atomos.com...
For more information on the NINJA V+ PRO KIT head to: www.atomos.com...
For more information on the NINJA V and Sony FX6 combination visit: www.atomos.com...

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@maxcastle499 Месяц назад

I use FX9 to record RAW by connecting XDCA-fx9 and ATOMOS ULTRA. However, when I adjust the EI in the FX9 viewfinder, the correct brightness and waveform height changes are reflected in the waveform graph, but not in the monitoring of ATOMOS ULTRA. The waveform EI and brightness of the external monitor do not change. How can I adjust the EI changes of the FX9 viewfinder and the external ATOMOS recording machine at the same time? Thank you very much!

@SquareDealProd Месяц назад

Same here, Alister? Can you help?

@SquareDealProd Месяц назад

This all I could find related: Here are some steps you can take to set up the FX6 and Ninja V for Cine EI mode: Go to the Project Menu and navigate to Base Settings Select Cine EI for Shooting Mode Choose a frequency based on your project's final delivery frame rate Change the Image Scan Mode to Full Frame Change the Codec to RAW Select RAW Output Format and choose 3840x2160 Go to the Shooting Menu and scroll to S and Q Motion Set the frame rate to 120 or 100 if you're in the PAL region ??

@scottjohnson3017 3 года назад

I think I'll wait until ProRes Raw can be directly manipulated natively in Davinci Resolve, without having to go through the extra step of having to transcode the footage first. Otherwise, SLog3 and ProRes HQ is plenty good enough for most.

@yugenproductionstn 2 года назад

Can you shoot 120p prores hq with fx6?

@petersuvara Год назад

I don’t think that will happen for commercial reasons.

@johnclay7644 3 года назад

Useful on fx6 and the ninja v monitor.

@cod2killskyguy 3 года назад

What is the piece called where you mount the Ninja on? Looking for such a thing for my monitor.

@toofy7253 3 года назад

wish this had an sdi slot for timecode jam syncing, so that we don't have to rely on battery switching. Haven't used the generic batteries because they aren't recommended, so the expense goes up. Love the improved power though

@AtomosChannel 3 года назад

Hi Vernon, Thanks for the feedback! I'll pass it onto our product teams :) Cheers, Toby - Atomos

@riseup_offical 3 года назад

How would one monitor s-cinetone on the Atomos ninja V? Native seems blown out..

@HP3TV 2 года назад

Thank you, as always.

@lukastemberger 3 года назад

I know this is an ad, but it's worth suggesting to do a bit of research if this is the best workflow for your scenario. When filming raw, some of the amazing image processing by Sony is not used, so footage can look a lot noisier and uneven.

@stuartswindell2835 9 месяцев назад

Did everyone see the missing file in the video haha

@Willferox Год назад

When I set the FX6 output format to UHD via SDI, the Ninja V loses signal. At HD it’s fine. Have a shoot tomorrow. Any thoughts?

@AtomosChannel Год назад

Hello William kee, Thanks for your comment! We are sorry to hear that you are having an issue with your setup. We have informed our tech support team that they are available to help you. Simply submit a support ticket, and one of our technical staff members will walk you through the steps. atomos.zendesk.com/hc/en-us/requests/new ATOMOS.

@bcnewsvideo Год назад

I ran into the same issue. This is how I resolved it. Go into the camera display output and turn off SDI then turn on again. Another workaround I discovered when I lost connection to my Atoms monitor, turn the camera and monitor off, then turn your camera on first, then turn your monitor on.

@kamikaze1213 3 года назад

I have Shogun Flame 7. I love it!

@LightLevity 2 года назад

is it let you record raw?

@kamikaze1213 2 года назад

@@LightLevity yes. 4K CinemaDNG raw on my Sony FS700R.

@plebianentertainment8012 2 года назад

Hey, when I shoot Prores Raw I don’t have this issue, but I change my output to XAVC I or L to shoot h265 all my camera settings are baked into the appear on the ninja v+ and is baked into image. Any idea what settings to change on the FX6?