Hey Jim. I see you used a 323 Spray Tip. You mentioned having the pressure around 2400 psi. Do you always do that with latex or does it just depend on the paint you use?
That's usually how I run the latex machine regardless of what machine it is. When I spray the low VOC paint I run 325 at 2800 to full pressure because I am moving faster. Thanks for watching
@@tylercarter770 it worked pretty good, except when cleaning out the machine with water. Any water splashed on the machine removed the coating. But overall it kept it clean
For the cost of the machine, the limitation on how long it can run and the weight of the machine. I will stay with gas machines, we paint longer than the batteries will last. It's a great machine of you do small or medium jobs
@@linepainter I've used one for 2 years and manage to get up to 3 shifts between charges. I think you would be greatly surprised. Love ya channel. Cheers from Aus
Was it easy going from a walk behind Striper to the seat? Is there a big learning curve to that I have 2-3900s that I’ve been using for ever now that I’m 53. The seat is looking much better for me with that same Striper you’re using.
Within 30 minutes you will be driving around the parking lot. Give it a couple of months until you Master the line driver. But they are worth every penny
Thanks for watching, here is a link to that type of strainer. I found this by a google search. www.stinehome.com/home-improvement/paint-supplies/painting-tools-and-supplies/paint-pails-and-buckets/leaktite-plastic-bucket-strainer-5-gal.-white/1202845.html?srsltid=AfmBOoruZuVFVzVSCHZeRQOCnRueX_T6fXGlT79-qLpQ_74PKsBZOK_cW4E
