Тёмный

Using the multi function buttons with ETHOS: The modes and how to output on a single channel 

Mr.D - Falling with style
Подписаться 9 тыс.
Просмотров 5 тыс.
50% 1

🔗 www.MrD-RC.com 🔗 / mrd_rc
In this video we check out the multifunction buttons that are on all the latest FrSKY transmitters. On the X18, X20, and XE, there are 6 buttons at the bottom centre of the transmitter. On the TWIN X-Lite, there are 4 buttons, just below the screen. This video shows how this works on an X20. But it's the same on all the transmitters. With the X-Lite, you will have 4-pos, 4pos with off, 4 x 2 pos, and momentary modes. All the different button modes are explained. Plus, I show how to get 2x3 pos, 6-pos, and 6-pos with off modes operating on a single channel.
✈️ Contents ✈️
00:00 Introduction
00:35 Where to change how the multifunction button works
01:15 6-pos or 4-pos on the TWIN X-Lite
01:33 6-pos with off or 4-pos with off on the TWIN X-Lite
01:46 2 x 3 pos
02:17 6 x 2 pos or 4 x 2 pos on the TWIN X-Lite
02:48 Momentary
03:02 How to set up the switches that need additional programming
07:32 How to use the multifunction switch in addition to a traditional switch
11:56 Conclusion
Thank you for watching this video. Time is precious, so I hope that you got some benefit from this video. If you have any questions, please leave a comment and I'll do my best to answer. Please try to keep questions relevant to the video in, as they may also help others who have the same question.
✈️ In this video ✈️
⚙️ FrSKY TANDEM X20 Pro transmitter: bit.ly/MrD_FrSKYX20Pro
✈️ Help other RC pilots find this video ✈️
If you found the video useful, I'd appreciate a thumbs up. This will help RU-vid share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
✈️ Supporting me and other resources ✈️
🛩 There are more tutorials on my web site at www.MrD-RC.com.
🛩 You can also join like-minded people at the Fixed Wing RC Rebels group and INAV Fixed Wing Group on Facebook.
🛩 Join the channel's discord server at / discord
🛩 Liking the video, subscribing, and clicking the bell icon can help greatly. This shows RU-vid that the video is helpful, so it will be shown to more people, who may have the problem dealt with here.
🛩 If you found my video useful, you can become a Patreon at / mrd_rc
🛩 If you prefer, you could always buy me a Coffee at www.mrd-rc.com/go/ko-fi/
🛩 I also have merch at mrd-rc.creator-spring.com/ This include branded items as well as general fixed wing RC apparel.
Thank you for your time, and don't forget to fly it like you stole it!
#FrSKY #ETHOS #ETHOSProgramming

Хобби

Опубликовано:

 

26 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 30   
@ericboeckmans6
@ericboeckmans6 21 день назад
Great tutorial ... as usual - many thanks!!!
@MrD
@MrD 21 день назад
Thanks. I’m glad it helped 👍🏻
@acrodow0384
@acrodow0384 3 месяца назад
Good Stuff. Many thanks for all your videos. Very helpful, clear and concise.
@stevenmohr4588
@stevenmohr4588 6 месяцев назад
Thanks once again Darren for an awesome video. I thought these would be useless, but now I’ve gained x6 on - off buttons! How good is that! Thanks again! 🎉😊
@MrD
@MrD 6 месяцев назад
Glad it helped Steve 👍🏻
@JDDupuy
@JDDupuy 8 месяцев назад
Excellent video. Never knew how, now I do!
@MrD
@MrD 8 месяцев назад
Glad to help JD 👍🏻
@cwwisk
@cwwisk 8 месяцев назад
Thank you!
@MrD
@MrD 8 месяцев назад
You're welcome 👍🏻
@dirtydogfpv6905
@dirtydogfpv6905 8 месяцев назад
thanks buddy i feel that was amed at me ha ha
@MrD
@MrD 8 месяцев назад
It inspired me to make it lol
@polyscient
@polyscient 2 месяца назад
On X18S transmitter there is no Var option under mix type. Cant find function switches under free mix.
@Jamesn-js1zp
@Jamesn-js1zp 8 месяцев назад
I've used the 6-Pos switches for various head speeds (RPM) on Heli's every sine FrSky released the X20S. For iNav I've set up my X20S to work identical to the iNav fixed wing groups standard OpenTx model, however if using the 6-Pos switches it can be easily configured to the iNav's groups Pro OpenTX model.
@cadecvd
@cadecvd 6 месяцев назад
Can you make a video of naming switches for certain buttons like you did.. but show what each change does on the airplane?.. I watched this video but all these changing isn’t registering why I would use or need it!..
@greenroom8454
@greenroom8454 5 месяцев назад
Hello Mr. Daran is setting up the archer rs plus rssi to read correctly in betaflight osd the same as if I were using open or edgetx. I’m using sbus on the receiver side and my transmitter is the twin xlite .
@goesnick
@goesnick 14 дней назад
There is no var option on my x20 pro Ethos 1.5.8
@PopeyeFPV
@PopeyeFPV 6 месяцев назад
Hey Darren, have you tried the “text to speech ” feature on your new X20 pro? Id love to hear your opinion /experience with it.
@MrD
@MrD 6 месяцев назад
I’ve used it briefly. If I’m honest, I think at this stage it would be a good temporary voice. But for anything I hear a lot. I’d rather have a dedicated sound file. Hopefully the voice can be improved in the future.
@PopeyeFPV
@PopeyeFPV 6 месяцев назад
@@MrD Interesting. Let's hope it's better with future updates. I appreciate the detailed reply 👍 Cheers
@RubyS.1
@RubyS.1 8 месяцев назад
I would have never figured that out on my own. (I thought VAR was for vario or something 😊)
@MrD
@MrD 8 месяцев назад
Yeah, it’s not the most intuitive name. I think it may be short for variable input or variable channel. But it’s especially confusing coming from OpenTX. Where variables are more variables in the computer programming sense.
@grumpyoldnerd8727
@grumpyoldnerd8727 8 месяцев назад
V for Vendetta ? Or V for Visitors ? Victor ? Vulcan ? 🤔
@MrD
@MrD 8 месяцев назад
Damn copy and paste error 🤦🏼‍♂️ Vi veri veniversum vivus vici
@ryfi_fpv
@ryfi_fpv 8 месяцев назад
v
@MrD
@MrD 8 месяцев назад
Fat fingers copying and pasting
@hapsti
@hapsti 8 месяцев назад
V
@MrD
@MrD 8 месяцев назад
Thanks. Copy and paste mishap.
@AlanAJRoberts
@AlanAJRoberts 8 месяцев назад
It would be nice to be able to select a particular function switch active at switch on
@MrD
@MrD 8 месяцев назад
It won’t automatically. But you can set a warning in the checklist. So that a particular function button needs to be enabled when you power on or change to that model.
@chiprobertson3094
@chiprobertson3094 2 месяца назад
Get a better canera and microphone
Далее
Setting up FrSky Receiver Redundancy
14:38
Просмотров 14 тыс.
Setting up Rates and Expo in FrSky ETHOS
5:58
Просмотров 3,8 тыс.
Ethos 1.5 Timers-Yes, they really do work!
11:31
Просмотров 1,3 тыс.
Setting up the FrSky SxR receivers on ETHOS
22:45
Просмотров 20 тыс.
FrSky Ethos - Flight Modes and the "Not Option"?
11:54
Просмотров 2,4 тыс.
Готовлю идеальный стейк
1:00
Просмотров 3,3 млн