VAN BUILD FAIL - Water, Solar Lift, and Possible DELAY? Campervan Conversion #11

Подписаться 294 тыс.

Просмотров 102 тыс.

50% 1

Some mistakes can take months to fix…like this water tank FAIL. This week we grappled with the fact that the custom water tanks were not what we ordered. We would’ve lost over 20L of water storage, a good amount of clearance, and a lot of other details that aren’t worth mentioning. Ladi has decided he’s going to make our tanks HIMSELF (yes, he's an actual super-human) and in the meantime take the week to tackle some details regarding the solar lift.
**TEASER**: In order to make sure our build videos are high quality, single-project videos, I came up with a pretty epic idea. Make sure to get excited for next Wednesday (DECEMBER 23). I can hardly wait!
Van Build Parts List: www.ladiandmar...
Our eBike business: mysuperebike.com/
Subscribe: / @ladiandmargaret
Amazon Wish List: www.amazon.de/...
The Peak Design mobile mounts we mentioned: bit.ly/37qUBvH
______________________________________
We’re Ladi (from Czechia) & Margaret (from USA) and we’re a location independent couple of 4+ years, currently spending 2020 in eastern Czech Republic due to the pandemic. This channel is centered around our favorite things: eBikes, campervans, and cats (mostly Millie, lol) Our world has definitely changed a lot since Covid-19 impacted our travel plans, but we hope to soon be back on the road with our awesome eBikes and little Millie Kua Maha, who is quite the traveler herself, and probably the most popular one in our little trio. Thank you for supporting us and being a part of this community!
Music by: Epidemic Sound, Artlist, and BenSound
#vanconversion #vanbuild #vanlife

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 312

@ladiandmargaret 3 года назад

Welp, I guess not every week can be a winner. What a bummer.... We were so ready to move onto the next phase, but it seems it will take an extra few weeks. IN THE MEANTIME... I had the absolute greatest idea for the next video, guaranteed to put a big smile on your face for the holidays and completely cater to this incredible community. If you're curious or excited, SMASH THAT LIKE BUTTON (please?) hehe :) Have a wonderful week!

@helenac72 3 года назад

So does this mean Margaret will have time for some more review videos?!?!

@Devil-024 2 года назад

More content of actually modifying and building the van in to a camper. Less other content pls.

@lostman65 3 года назад

Ladi!!! just build the damn tank yourself! this will not only entertain us, but it will give you the confidence/skills to make it more custom and be able to make adjustments in the future.

@F4ilu2e 3 года назад

Yes please and teach us with trial and error.

@myfavs253 3 года назад

Can't you take the plans to someone who has a larger 3D printer setup and have it done? Isn't that pretty fast?

@matino717 3 года назад

@@myfavs253 Do you know how much a 3D printer that makes furniture size stuff cost in real?????????? (that wasnʼt 3d printed... just bad construction)

@myfavs253 3 года назад

@@matino717 No I really don't know any details of 3D printing. But I have seen things being made on you tube. And I know there is a concrete type that can build a tiny house in about 24 hours. There is a 3D group of enthusiasts out there too. I looked them up once because I have an idea for an invention.

@questioner1596 3 года назад

What was that footage from? Building a tank that we'll see in a future video?

@morkovija 3 года назад

Yeah, I like this turn of events where not everything goes as planned. Something I certainly can relate more to! Good luck!

@redkingwell4047 3 года назад

The level of creativity that goes into your videos is ridiculous ! You make it so easy to understand what your doing and how your doing it :) keep up the good work guys !

@martyngibbons9749 3 года назад

Hi guys...I'm sure Ladi has got the skills to make your water tanks. Bit of advice, as I used to similar work, when purchasing your sheet material and the corner beading ..make sure they have the same melting temperature or as near as possible...that way when using the hot air gun you are effectively melting the two sheet parts and beading together as one piece...also when starting the corner beading...slice off the back at a 45 degree angle...it will fit into the corners better....when melting the beading look for a pool of molten plastic at the back and keep that pool going as you move along...that way you know it's all melting together....I'm sure theres some plastic lining video's a available which will show you in detail....hope this helps and carry on the good work as I do enjoy your video's 😁

@NinaThoren 3 года назад

Now you made start thinking of tilting the solar panels in my design, love that you keep giving me things to consider in my own future build and evolving my design! The tanks were a real bummer but I am glad you share your struggles with us

@ladiandmargaret 3 года назад

Thanks. It makes sense to be tilting our 1000W panels! Winter camping ready.

@NinaThoren 3 года назад

@@ladiandmargaret I plan to fit 800W-1000W and I have seen tilted panels but you really made me think about it when you explained the benefits!

@ladiandmargaret 3 года назад

Think about winter times when the sun is low all the time. It’s better to have more power and burn it in floor heating :)

@NinaThoren 3 года назад

@@ladiandmargaret So true, this is why your build series is needed haha

@jenp2217 3 года назад

Ladi is going to crush the tank build! Two very important requests: 1) please include a shot of Millie sniffing the camera in slow motion whenever possible. It is to die for. 2) What are the chances it's possible to build a e-bike that folds in half like a montague bike?

@JustAGalOnTheGo 3 года назад

Yikes! That really was a big setback but I’ve no doubt it will be another Ladi triumph in the end. I just have to say that the early morning drone footage and the scenic ebike footage are just stunning! Thanks for the quality video. ❤️

@eviemiller8100 3 года назад

Yeah, Millie time!! And so sorry about the tanks. That is awful news and devastating to your timeline. Hang in there! And I can't wait to see how Ladi builds some new ones!

@YvonneRaphaelWriter 3 года назад

Such a set back! I’m really pulling for you to find a speedy solution!

@garethholmes9497 2 года назад

You two are phenomenal, I’m loving the van build and the e-bike business….wow they are awesome!!

@memoriasIT 3 года назад

I am sorry for you for dealing with this problem of the tank, but so happy of seeing Ladi take this task too hahaha Good luck, hopefully you make the best of the situation!

@leenhixt9023 3 года назад

It's okay... Ladi is genius!

@dzejkub420 3 года назад

True

@pinoqiopiqo1418 3 года назад

Wow 😳 Very cool, I love your work and this achievement, you are awesome, this van and decor is my dream ❤️

@rebeccanakashima 3 года назад

Wow! I am so frustrated for you, but hope you can find a quick solution that will be HANDLED WITH CARE. Footage of the town, ebike view, and Millie really balanced the video! Thank you for sharing! 💚

@kathiLGLP 3 года назад

you guys are a HOOT! "Running, Running, still Running... yeah... still Running"... 😂 thanks for sharing your struggles as well as the many EPIC WINS.. Love your channel, but more - love your attitudes!! Very Merry Christmas to you!!

@a.w.thompson4001 3 года назад

That Millie montage made up for past transgressions; keep it up! I don't know how she could possibly be more perfect. ;) Don't stress about changes in plan from a vlogging POV--whatever y'all do is always entertsining. I'm with JenP; a *folding* Ladi ebike would be incredible for portability. Dream big! Thanks again for your excellent channel. Looking forward to the video fun you teased.

@Pflexer 3 года назад

Oh no! I’m sorry about the tank guys! It is such an incredible design I’m actually looking forward to seeing if Ladi can work it out and create a product he can even bring to market one day! What an incredible possible outcome this could be if he can figure it out but still a huge bummer! Love the editing Margaret you are so creative both of you! So entertaining and impressive 🤗❤️💋

@Pflexer 3 года назад

I just said bummer and read your comment Margaret lol! Are you from the northeast by chance? I’m from outside philly and live in Florida’s old saint Augustine now!

@womacko 3 года назад

I feel you... If you're capable of doing things yourself, but simply not having the time to do this one yourself as well.. Such a pity.. Keep on keepin' on!

@myentertainment55 3 года назад

Almost 100k subs wow! Wow you are making solar with changing angle - so fancy and cool!

@grip5168 3 года назад

Good job Ladi and Margaret. Loved this video

@jamieabel477 3 года назад

I like how “devastation” is just a picture of Atlanta traffic 😂☠️

@annatyburski6506 3 года назад

I think it’s a nod to the walking dead.

@jamieabel477 3 года назад

@@annatyburski6506 oh yea, that was filmed in Atlanta

@drabstar 3 года назад

You can draw inspiration from the cats sun lounger for the solar mechanism. Nice and simple. Love the videos!!

@keriezy 3 года назад

Sorry to hear that your water tanks did not build out properly but I am very grateful for the Mille montage.

@ladiandmargaret 3 года назад

isn't she just the cutest? our littlest bunny

@keriezy 3 года назад

@@ladiandmargaret seriously? I about died when she was on the play structure, and then when she stuck her fat butt in the lawnmower! Omg 😍

@ruthanderson1758 3 года назад

Nothing ever goes as planned when doing construction of any type. Millie is beautiful - she reminds me of the calico cat named Punkie that I had many years ago. It was only after she passed away that I found out I was allergic to cats, so I haven't had one since.

@elleyd6985 3 года назад

Love you guys keep the video build coming can't wait to see it done

@jenniferdawn73 3 года назад

Love the Milly updates! So sorry for the water tank drama! Totally trust Ladi can do it - just sending strength for the delay and stress this will add. Also... if I ever get to have a camper van I totally want one designed by you all!!!! Hope someday you'll start doing that too!

@chrisholmstrom624 3 года назад

Have you considered adding a cover to your grey water camera so road debris doesn't damage it.

@ladiandmargaret 3 года назад

It will be well installed don't worry.

@billasohyeah 3 года назад

You guys are amazing and make a great team!

@nomansvan827 3 года назад

You guys are so fun to watch. Thank you.

@ladiandmargaret 3 года назад

Thank you! We are tryin’ our best!

@lascruces-vh4oe 3 года назад

Yay! Millie! She is so beautiful. Thanks and stay safe.

@ladiandmargaret 3 года назад

I feel like she got a proper spotlight this video 😅

@doridahn1601 3 года назад

@@ladiandmargaret We love our "Moments with Millie" or "Millie Moments" :) Great job, enjoying the videos and build !!

@JHDAY 3 года назад

Ladi. Consider using a vertical compression spring (coil or leaf), or wedge at the non-motor end of the actuator, to start the vertical movement of the panel. Try to use the power of retraction to lock the panel down with a caming latch. I'm hoping to design a lift wherein the panels are stored when the actuator is half extended, and will tilt one way when fully extended and tilt the other way when fully retracted (fewer actuators). If I can't , I'll use solenoids to lock right side or left side pivot points to get same result.

@yessin9541 3 года назад

16:07 ladi is the best the most professional and and creative photographer i ever knew

@pinoqiopiqo1418 3 года назад

Wow 😳 Very cool, I love your work and this achievement, you are awesome, this van and decor is my dream ❤️

@pinoqiopiqo1418 3 года назад

Wow 😳 Very cool, I love your work and this achievement, you are awesome, this van and decor is my dream ❤️

@sprinterdiscovery 3 года назад

The actuator demo was extremely interesting and educational. Could you do an expanded video on just actuators? Like how they get mounted to the floor or roof, what kind of an angle they can actuate at, etc. Your videos are absolutely great, and I'm always glad when you post something. Always lots to learn. Take care!

@heidesmichelle 3 года назад

I love a good Millie break 🤎

@dughuff8825 3 года назад

So much ingenuity! Love it! I'm sure you'll get past the tank problem with your usual style and flair for design. Good luck!

@ashleymay4719 3 года назад

All that sealant slapped over the joints on the tank make me wonder if the plastic welds underneath are even water tight. Sorry for your set back guys. If they made that many changes without consulting you I personally would not pay. The drain off point was a joke. 5 litres left! As a welder and fabricator who has made his own thermal store out of stainless steel I'm interested to know what made you go the plastic route and what the pro's and con's are? I'm guessing the weight is the biggest attraction? Anyway keep up the good work guys, very thorough build detail and entertaining video's. I'm pinching your triple glazed Argon filled roof window idea for my truck conversion. Top man.👍👍👍👍

@Dropbear888 3 года назад

Suggestion, if you used a spring plunger for initial lifting it will reduce starting force for actuators as well as act as anti-vibration device.

@kellygoddard5798 3 года назад

I hope you got your money back for those tanks or refused to pay him omg that horrible 😔

@mariocooke5463 3 года назад

Awsome video. Fun, creative, artistic.

@jeff9337 3 года назад

Hey Ladi, I'm so glad your wanting to lift your solar panels with a actuator as I'm trying to do the same. I'm leaning towards using a bell-crank. Thinking if i push off of the side that's hinged I can connect to a stationary pivot point where the b/crank is and the other side of this b/crank will have some rod hooked to solar panels. When the actuator shoots out and pushes the b/crank, the other end will push against the solar panel and raise the opposite side than the one hinged down. In theory I think this should work,,, but I'm kind of waiting to see how you tackle this and margaret captures it on film hopefully in EP. 12 Stay safe & out of the cold

@ladiandmargaret 3 года назад

Hi, I’m in the development stage and it’s damn difficult to keep the solar as low as possible, lock it at the bottom position and have over 45 degrees angle. Send me a simple drawing of your idea at Ladi@mysuperebike.com if you don’t mind. I’m open to some ideas!

@markdemedeiros3239 3 года назад

Bummer about the tanks....Ladi to the rescue I'm sure of it. The mad Chechen Scientist will prevail....LOL

@fatboyandjac 3 года назад

Hi, We’d like to take this opportunity to wish you a Merry Christmas and a healthy and prosperous New Year and may all your adventures make great memories for you so keep travelling Kind Regards Nige’ & Jacqui 🙏

@murraymint8159 3 года назад

Jesus, I'm no expert but that was some real shoddy work on those tanks. Great update on Millie 🐈

@antoningolias9596 3 года назад

Čus Laďo perfektní práce 👍👍👍👍👍dík za české titulky

@JoBroProducitons 3 года назад

60 miles per hour?! That's insane

@DebbraLupien_AkashicRecords 3 года назад

Sorry Margaret, that *is* a bummer. The only sensible solution is that Ladi makes them. It will be worth it in the long run.

@Tanya-zx9xm 3 года назад

Awwwe MILLIE! She warms my heart! lol btw great van lol

@karuzelastudio7858 3 года назад

I just love you two and your videos so much! You prioritize a lot of things I wanted for my design too... But watching the struggle makes me think there's no way I can make it work myself, booo!

@suzannesmith6794 3 года назад

Ladi can do it. He is very smart

@ВиталийНаходко 3 года назад

like your approach, waiting new episode

@chasinggeckos8843 3 года назад

Too bad about the tanks. My guess is Ladi will learn to plastic weld, start a biz making custom tanks, make the best tanks ever and ship them around the world. Seems like that kinda dude. And no I have never ever said to my self “ gee wish I could see more cat in your videos “ :) great job in editing. Truly you have gift.

@HannesSchleeh 3 года назад

What a cool cat!

@suedefringe 3 года назад

I would have been HOT if I were you guys. With the attention to detail in all the work you guys do I would have been pissed seeing that tank. Ps that seal reminded me of some of the hideous roof fan installs I have seen.

@nixda8901 3 года назад

Always fun and very educative to watch your videos! Ladi, I think you are looking for some kind of self-locking but also self off-pushing mechanism with only one actuator? I have some ideas because I face the same problem in my project. I would be happy to share them with you and everyone :)

@ladiandmargaret 3 года назад

Hi, I'm planning two actuators on both sides. Some sort of locking will be important to have I think. We've started making a physical prototype so will see soon how this turns out.

@TikiMobile 3 года назад

For the solar, what about using a lift like a scissor jack? Also, although it's a ton more research and work, if Ladi builds the water tank it'll be perfectly designed and durable :-)

@ladiandmargaret 3 года назад

Thanks for the input. I(Ladi) considered scissor jack mechanism too. When you lay out all the measurements in 1:1 ratio you quickly realize not that many solutions are doable. We aim for very low profile and steep solar angle. Many people have done solar lifts already but we want to do it better.

@NeoManoscaMusic 3 года назад

Lot's of fun watching you both! Sending loves here from Philippines!

@LilyWasHereMB 3 года назад

Liked this post so much I watched it twice. Unfortunately, YT only let me like it once.

@luvnotvideos 3 года назад

Definitely build the tanks yourself. There are a lot of RU-vid videos about building fiberglass tanks that should be helpful! Fiberglass is very easy to use, can be built up over foam board to provide built-in thermal protection, and can be layered to a very strong thickness, and is infinitely customizable. If you're worried about leaching chemicals in the water, just glaze the interior with a food-safe epoxy. If you don't want to touch fiberglass, why not weld a stainless steel tank? Just some thoughts. Plastic isn't the only way to go. There's a ton of alternatives :) GOOD LUCK and HAVE FUN!

@paolopilotto8603 3 года назад

Have you considered the idea of putting the actuator on the other side (where the solar panels are fixed) and lift them with a V-shaped lever like the one on the cric to lift the car? You probably already figured it out but I think this way would be my first try. Excellent content btw keep going guys

@Kathiewinkle 3 года назад

Profesor Ladi 🥸you are invincible and my brain 🧠 is so dumb I haven’t got the faintest clue what you are saying ! Margie hats 👒 off to you for nabbing a great guy ! PS you are awesome too and Millie is the best

@aLo_etc 3 года назад

You guys are awesome!!

@jenhalpin 3 года назад

We’re putting external fresh and grey water tanks after all flooring since the plumbing has to go up and through the floor anyway.

@TWSUF-JI 3 года назад

Thanks for the Millie update!

@paulechols 3 года назад

Awesome green screen footage 🤠 Mia the cat says "Woem", to Milly

@source5729 3 года назад

Just ADORE you 2!!!

@jasmineppaladino 3 года назад

Not enough millie. She needs her own playlist. 😋

@thekingoftheworld9553 3 года назад

A tank is just a box..... Easy mate!

@wilsonwombat3456 3 года назад

Bad luck about the tanks. Relying on others can be such a pain. I ordered my windows three weeks ago and have just been told now they won't be ready until late January. By Xmas they said! If you're going to use vinyl sheet flooring (I am), turn it up at the sides where it can't be seen by about 20mm. This way it will reduce the chance of any spillages, dust and dirt getting under the floor.

@adventuretimelouishorts 3 года назад

Ahhh I wanna build one of those ebikes but I don’t have room to store it in my tiny mini van 😭 one day when I get a bigger van imma build one!

@brunoancic1401 3 года назад

Make it like boat tanks are made, we do it al the time. Use Aluminum or stainlessteel 4mm plate, outsource cutting on laser or water cuter with all through holes. Weld it mig or tig with splash bulkheads. ....

@jacobwirz1172 Год назад

Haven't watched the next one yet, but Ladi will crush making those tanks!!! The ordered ones were baaaad. I understand it's a difficult process but come on...

@Henrinho19 3 года назад

watching videos of ladi doing 3d modelling would be interesting.

@ladiandmargaret 3 года назад

We'll try to incorporate more screen recordings and time lapses!

@paulhamlet804 3 года назад

What about two actuators positioned to face eachother along one long edge of the solar frame. With a small "entry" angle of the opposing actuators (actuators fitted to reinforced section of the roof and a centrally placed bracket on the frame, say 8cm vertical height) the force of the actuators would result in the solar frame being lifted. No forces would be transmitted to the frame structure, just the solid metal bracket. For a 100cm actuator you would get approx a 45 degree panel angle which would be enough to make a significant increase in the solar yield and still be safe in light to moderate winds.

@nadiariaskoff4543 3 года назад

wind - aerodynamic shield for the batteries on the front roof is sufficient to deflect the air velocity sneaking under the battery beds. btw: all objects on the roof create additional vibration load and the ceiling from inside is better to be cross-beamed ;o). But I luv yr creativeness and hard work. I'm gonna make my stealth van soon - fingers crossed :o).

@jackelpubs2728 3 года назад

It’s rare that I find someone who does something as picky as I would do it, but that tank looked unprofessional. That being said, Ladi can do this 😊 but what a pain 🤨

@johnmca5643 3 года назад

Maybe a new Van Tour Layout Review while we wait for new water tanks?....😁

@johannab3668 3 года назад

Phew first things first - glad to see Millie out and about! 😺 So, I think this question might be stupid, but I'm currently considering this for my own build.... Can't you just go ahead with your flooring anyway? You can always cut through the floor board and insulation afterward. I also don't have my tank yet, nor my diesel heater that needs to go under the van. I am totally thinking to go that route. Am I insane? You make me question myself lol 😬 I'm so sorry about your tanks! That sucks so hard!

@Wookey. 3 года назад

My neighbour made loo cistern by acrylic solvent welding. Worked pretty well. Dunno how that stands up to having 160Kg of water sloshing in it under a van, but I guess you can add strengthening baffles. Are you planning to use ABS or HDPE and heat weld instead? I did consider making a (steel) hot-water tank for a solar system a few years ago as ones with stratifiers in were incredibly expensive and don't fit in UK houses. As it was upstairs and leak consequences were large I wimped out in the end and just left that project for later. So I look forward to finding out how to do custom tank construction. Aluminium with a fibreglass liner is a good way of making something really strong. Or even just fibreglass in a former (and a bash plate on the bottom). Any fool can make fibreglass :-)

@jackelpubs2728 3 года назад

Love the end. You all are funny and fun 😊

@michaelrs8010 3 года назад

Another good video, but when I first saw the thumbnail, I thought you guys were going for a Star Trek theme 😁

@tinabrown7959 3 года назад

Hello Ladi and Margaret, I know a great ask, any chance of having it in Spanish audio. Love your videos. Currently looking after homeless men and they are doing great - I have introduced them to Van Life videos and Tiny Homes videos. Also teaching them to cook, look after themselves and take control of their lives.

@andreasp2089 3 года назад

deaaam those thanks look ruff XD for a custom order and new , feel trolled

@ladiandmargaret 3 года назад

Exactly. Such a bad attempt

@nessabridge5019 3 года назад

Have you looked at water tanks for reach and wash window cleaning system?

@elbe354 3 года назад

The best cat ever.... and the best part if van build...l

@Theonebaddude 3 года назад

Van mascot Millie 👍🏾

@Le_Corse_Belge 3 года назад

A small Idea for the solar panels, when you drive and you don't want that they move while driving put in the front a small spoiler so the wind get over the panels and not under or between...

@ladiandmargaret 3 года назад

Thanks, spoiler is a very obvious part of the roof design.

@anjaporter 3 года назад

Millie update, YAY!

@susannemulholland4804 3 года назад

Love having some Milly spam 😻

@AK141415 3 года назад

Maybe as a break you can review more vans!!?! We need season 2 of your vans for review!!!

@jensedelmann7004 3 года назад

The tilting is tough. What about pulling the solars on small springs/ or rubber bushings? Thisvwill keep it from Ratteling when they are down and help to get over the dead Point when pushing up. Maybe a cantilever design that helps to get away from that flat angle.

@ladiandmargaret 3 года назад

I'm afraid it would be impossible to achieve even 40 degrees angle and keep a low profile.

@jensedelmann7004 3 года назад

@@ladiandmargaret I would dump the tilting and rather get the aerodynamics right so that you doun't have wind-noises while driving. The tilting mechisem will be very anoying iff you have a constant wind-whine while driving. You got enough solar, it will ok withouht tilting. If you get some E-bikes (Enduro whith BBSHD) where it does make sence to Pedal, that is good for your health and will at least 3x 4x extend your range. 800Wh per day would be more than enough for 1 bike 1day 80km or 2000hm easy.

@ladiandmargaret 3 года назад

Thank you for your suggestions. We know exactly what we want.

@oraclewyrd2639 3 года назад

Have two cats in a small space and they lived on the boat with me. Use a Frisco Wall Sisal Cat Scratcher that works well. They don't like ones that are just flat against the wall, tho

@oraclewyrd2639 3 года назад

Have to wrap it around a wall corner or they will not use it

@randyfedora6519 3 года назад

I really like theses video . Reminds me of Trent & Alley

@karolinajol5687 3 года назад

Omg, i Love you guys so much❤❤❤

@antonputtemans 3 года назад

What's wrong with aluminium or inox? When you do, use TefGel on all your bolts!

@robertwayne3567 3 года назад

amazing clip!

@ladiandmargaret 3 года назад

makes me laugh every time!

@elektrobits3408 3 года назад

Bad luck - great video! 👍 Making custom tanks is a great option that could help in many builds. Would be interesting to see. You could create a second "tank" that goes around the isolation for protection (top side open). Or add pipes going through the tank for cabels or the break linkage under the Ducato...