tutorial on how to make this; 1. Get a small cardboard box (if it’s too big trim the edges and glue or tape some back on) 2. Get a ziplock bag and paste about a bit more than half but still enough to put the pull push thing 3. use a utility knife to make the coin slot, the prize insert thing at the top, the pull push thing and the prize slot (if you don’t have a knife use a pencil to make a hole then cut from there) 4. I think this is how she did it but basically measure the pull push thing and from that measurement make it bigger and glue a square which is a few inches away from the same size of the inside of the box or you can add two little cardboard rectangles to the side then with the push out, thing make sure to put it a bit lower (Tip: make sure that the rectangle thing is close to the pull push thing) 5. make a small container with cardboard for the coins 6. Decorate and add the things and you have a little vending machine! 4
