Venom Triple Tree Front Motorcycle Stand - Build and Review 

People you need the number 21 pin on the fz6r. So if you order the proper kit that has that pin you will save some $$$$.

I thought I was crazy glad I’m not the only one that didn’t get the right instructions for the front triple tree stand

Thank you for this video I had just unboxed my identical Venom head stock lift but was not sure how to assemble and if the darn thing woule actually even work! But seeing you lift your bike gives me confidence it is the perfect thing for my MT-10 which btw uses the 16.5 mm pin this lift comes with...luckily the horn bracket is way out of the way on this model. I am guessing I have to lput the rear on a stand first otherwise if the bike rolled forwrd it could (im guessing) fall off the headstock lift which is totally hinged in the middle. I crashed my bike and damaged the outer tube on one side so for a temporary fix I bought for an amazing price a seemingly perfect pair of gold YZF R1 forks which I plan to pop the bike up on the lift, yank the front wheel and calipers (fender was damaged too so it is already off with carbon fiber replcement due any day) then just slide out the black originals and slide the gold forks in their place! While I'm at it? Im gonna pop the rotors off the front wheel and using brake cleaner and wet dry sand paper Ill break the glaze and then put my OEM brake pads back in the calipers because the cause of my crash was failed fronnt brakes! I had "upgraded" the pads to aftermarket HH sintered pads at 900 miles new with a brand recommended on a discussion thread re the MT-10 but for whatever reason they faded TOTALLY in a very bad place! Hence the crash hence my need of this Venom stand....I'm like you no way I am paying big bucks for the PitBull....MAYBE if I were a pro but I probbly wont use this but maybe a few times a year cant justify top quality

Ouch - that poor headlight is now pointing at the stars!! 😫

21 mm pin on my triumph used different sockets to find a snug fit then measured the socket as to order the right size pin as only comes with smaller size pins

If I’d learn how to do fork seals, this stand would be perfect!

I can’t vouch for that bike but for 08 to 16 Yamaha R6, the pin is 16.5

Good little video again bud. Have you tried it on the FZ6R with the fairing in place, how'd it work?

Do you have any videos of lifting it from the forks? I just got the regular venom lifts and I’m having a tough time lifting this bike still and trusting it’s securness. These FZ6Rs are nearly impossible to lift. All I want to do is remove the damn tires.

I think I know the answer, but will ask anyway…if I am going to rebuild the forks on my 2012 FZ6R, and my lower triple tree also needs to be replaced because it is so rusted out, will the Venom stand (that I just purchased that hasn’t arrived yet) need to be supplemented for that part of the job with some other type of lift or stand configuration ?

did you try it on the MV Agusta? did it work?