Verizon data limit bypass increase hotspot speed Visible lte 

Try resetting your network settings, I had an issue recently like I would be connected but with no connection apparently (I've been using this for about more than a month), but my hotspot works normally again and I'll try the prompt code again

But using a VPN helped get me back online when I had this issue, but all this only happened like a week ago, but try using a VPN, like Google one has a subscription plan that includes a VPN service for all it's plans, even for 1.99 a month

Got u , don’t forget to sub

Glad I could help 👍

This worked for me for the last 4 months, but now it's not working anymore. Tried to do it again. Still nothing. Anyway, I'm curious where did you have your VPN set for that helped? What about turning on your VPN helped? I turned my on and that did not help. Thanks!

@@NicholeMorton no problem , don’t forget to subscribe so I can eventually make some money here 😂😂

So when I was using this method I would actually enter it every time I would connect to the internet , and yes with congestion it will slow down; however you will no longer be limited via your cellular provider ie visible / Verizon .

Yessiiireee, hit the sub tho 😐😎

vpn on phone or pc?

No prob man , glad to help 😎

No problem campadre , hit the sub , I share memes too 😂

Gotchu bro 😎 👍 hit that subscribe one time for me 😂

I wish I did but am dumb sorry

So glad to help ya 👍

Hi 👋 . It is used for once you have been throttled down after using up all of your initial “faster speed” limit . I don’t believe there is any way to “mask” how much data you use . Because your carrier needs to send it and receive it back , they will always know how much you use . However by resetting (reducing) the ttl , the used data will appear to your provider as being used by your cellular device and not as a hotspot . Hope this helps you . 🙏 Subscribe as payment if you like the method 😂😂

Also , if you decide to make a video on it .. shout me out 👀

Absolutely

For sure, I use a iPhone 11

@@Reallydoood thanks, I appreciate it.

@@vajoinkles7537 no prob 😊

@@GohanBurner yep still works , usually it will cap to 5

If you have windows 7 it can be done , I would honestly say to just RU-vid search “bridge ps5 to windows 7 “ or “bridge connection windows 7”. I’ve done it before but it’s alot to explain and I don’t wanna give you bad instructions.

@@Reallydoood I figured out to bridge them and get the connection onto my ps5 however the laptop gets the full speed and now the ps5s download is 700kbps. I'm losing my mind so I may just stop trying. Thanks for the help anyways. I also brought the ttl down to 64 and it also didn't change the speeds.

You would need to bridge your computers connection to your tv or repeat the hotspot via computer in order to keep the speed boost .

The best way I would suggest to do it easily , is to just run a hdmi from your computer to your tv input and just display your computer through your tv . That’s just a easy instant solution if you have any issues with bridging or repeating the hotspot connection

Not a bug so no . Probably just need to disconnect the hotspot(maybe even turn it off for a bit , do the prompt , then connect hotspot

I have no idea why that would happen sorry . I do know that apex legends servers are definitely well known for being kind of junk so that’s what I would assume honestly.

@@Reallydoood rip, I appreciate the reply though

“Code net means you're having connectivity issues to EA servers. Unfortunately, there is nothing you can do to fix the issue on your side. You need to wait for EA to deploy a hotfix on their servers, which would solve the issue. Still, you may restart your computer/console and your router.. it may solve the issue !” . I just googled the keywords “code net errors” and to my amazement , the first thing that popped up was directly referring to apex legends 😂 I read a little about it and one of the things you could try is disconnecting and doing a dns flush on your command prompt before reconnecting ? Idk I don’t really know a lot about computers at all honestly

@@Reallydoood What a great hill he chose to die on. Maybe when all his devices get done resetting he can see if comcast will RESTART his internet service plan!

It should work on any machine after running it through the windows computer using a WiFi repeater program or through a lan cable . Like I said in the video if people want to know how to do that part , I can definitely make a video describing the different methods and alterations I know of in fuller extent .

Also I just mean that I use it to speed up my hotspot connection: I originally found this method in order to speed up my Xbox game downloads .

Yep 👍 can be done for sure .

Oh so you have to run a hotspot from the PC to the router? I've been trying to do that and failing alot

@@joshallen306 hardwire , Ethernet port .

Have you tried completing the authentication process from the homepage ? I have never had or heard of that issue before . Are you connecting wirelessly ? If you are doing a wired connection they may be part of the issue as well . Having trouble understanding the exact issue your having . Have you tried the customer service on the visible app ? I almost guarantee they can fix that for you , I’ve had some issues with visible in the past along with customer service issues but my problems are always resolved and reimbursed eventually.

@@Reallydoood what I’m saying is, it seems like when I connect the hotspot to any device besides my iPhone ( like consoles, laptop) when I get connected to the hotspot the web browser opens up on the laptop and goes to the visible website, no other website works. Just tells me I have to complete the authorization. But again no way I can’t because it’s just the normal visible website. On console it connects but no internet service.

@@JoTrev1 have you logged into the visible website once it pops up on your laptop ?

@@JoTrev1 also have you checked your email for any notifications or confirmation requests from visible ?

@@Reallydoood ill try that. I didn’t do that

No clue , but I can’t see why not . I believe in the mofi you can just change your ttl on the mofi software

🤩🤩🤩

I don’t have my laptop handy , but I will check it out tomorrow and let you know if it works on my end , which I’m assuming it does .

So after toying with it , I noticed that if you add another full command line afterwards , and swap ipv4 With ipv6 . It improves instantly for me

No problem , hit that subscribe for me 👍

Hit the subscribe, if the video ever gets taken down , I’ll reupload . 😊

Using my laptop as a second hotspot will not work for me with Visible. It does allow me to use MouseWithoutBorders to operate my second laptop from my first keyboard, so there is some connection enabled, but if I use my Visible phone as the hotspot for that first laptop, the second laptop claims there is no internet connection and I cannot access the net from the second laptop. However, if I use my MetroPCS phone as the original hotspot, then not only does MwB work but the second laptop also reports an internet connection and can access the internet. There is clearly some setting on Visible to prevent even such secondary connections. I need a backup connection so that I can trade safely online if my regular internet goes down, and I don't want to depend on and run down my usual cell phone in that event, so I wish Visible offered a plan enabling 2 devices on one hotspot. (Using 2 hotspots would mean MouseWithoutBorders won't work. Since I'm trying to create a backup system that will function as usual, apparently Visible isn't the answer for me.)

Pay off your contract and get visible or prepaid, it’s a better value

Did you do this and got the letter after?

This is exactly the way you would do that 😂

The computer , basically is lowering the number of “hops” the data takes when returning to the provider .

You would have to do the command on the receiving cell phone which I’m not even sure is possible , if it is … I would love to Learn about it

You are welcome , please sub ☺️

What do you mean by hardwire to pc ? And I do it every time . If your using it to boost pc speed , just run the command on the pc you are going to be using

If by hardwire you mean phone usb cord to the pc ; then yes

Long as u have unlimited/ throttled after 100 it should work .

Appreciate it man for real!!

@@199tue2 no prob man 👍👍

Saw that , appreciate it man 👍 glad to enlighten you

I do !

Didn’t realize you were such a tech-wiz , I’m impressed. 😂 👍 Thanks for the comment and watch bro 😎 .

Yep

@@Reallydoood Thank you!

Hotspotting

It works , your just doing something wrong .

I am 100% certain

@@Reallydoood I've got the command saved and I've always copy and pasted it so 100% certain that I am typing everything in correctly

@@2168jerome your running as admin ?

@@2168jerome and you have your vpn off while connecting ?

Phone

Yea, just go back to what you had before . Idk 🤷🏻‍♂️ 😂 I honestly have no idea what your trying to say here sorry bruh

Don’t think so

ran another test laptop said i was getting 23mbps disconnected the laptop and ran 3 network texts on xbox says im getting 6.14-7mbps download speed

so i tried using my laptop to share the hotspot connection being my laptop was getting 23-30mbps but 4mbps when connected to my xbox after connecting my phone to laptop enabling the laptop hotspot feature and connecting the to my xbox and running few tests i was getting 20-28mbps on my xbox then it went down to 8mbps still better than 3-4mbps

Fasho , hit the sub 😂

I’m pretty skeptical of that method . But idk

Don't do that. The carrier will lock the sim card and mark it as stolen.

@@frank-bmtz …… you could just call them and tell them it’s not stolen…. And have them make it right, like immediately. Especially Verizon and visible . I’ve had them credit and refund me for lost days or even hours of service multiple times and it’s not complicated to do at all just takes time to go through the ladder . Just request a elevation of the matter if someone says they can’t do something about your issue immediately. Especially with no contract/ prepaid lines . Because you have already paid them for an unconditional service which they are obligated to fulfill .

It would be a different process

Okay, so I went onto my chromebook crosh, which is very similar to the command prompt on Windows 10. And I entered in the netsh default=65 code, and it told me it was an unknown command. Would you happen to know what the command would be for Chrome? To you know set the TTL to 65?

@@elitegamer1725 wish I could help you, but I only know this method currently.

No. Just connect your laptop to your hotspot, then do this in your laptop.

Both work , either wired or wireless connection

Best guess would be that you just need a stronger cell Signal for any faster speeds . Visible and windows 10 work great usually

For some reason I can’t see your comment but got a notification .?

@@Reallydoood Oh I deleted the comment, my bad. Delete Visible phone app and run ya tests again. I got 15d9u now. my bud who just got visible gets 50/25 but hes got a better phone and closer to a tower.

@@Xanthro2 wonderful 👍

I have been using this method , firstly with Verizon , then later with visible for about 18 months without any type of issues . I’m not sure if 5G would have any different type of command you would use ; if you try it out please let me know what kind of speeds you get . Currently I pay 25$ a month for an average of like 10-30 mbps from my iPhone through visible using this method . Also i have seen people replace ipv6 for ipv4 in the command line before also . But like I said I have no idea how any of this works all I know is that it definitely does .

Also I have mine hardwired to my Xbox and can play apex legends, halo infinite , call of duty and stream all forms of video without issue . Although there has been a very few amount of times where the towers were congested and it ran slower than normal , but I’d honestly give it a try if I was you . If you have any problems with getting it to work I’d be glad to clarify my instructions. This was my first RU-vid video so I can see how it’s not exactly a completely flawless explanation.

Yes it works. The only problem is if you use your phone as hotspot it might heat up and cause your battery to age early.

Anything for u bub 😂👍👍👍

Big time , just gotta have a laptop to do the limit bypass

Just like this , than bridge the connection through a Ethernet if ur computer has it

@@Reallydoood ok

@@Reallydoood is there a possible way to do without a ethernet cable?

I’m not sure if it’s necessary but I do it every time

Google how to change the TTL on Windows 10 with the registry to make it permanent 😉

stfu... there is no way networks are congested at 2am only after you hit a arbitrary data cap and not before

Shut up

I’m going to do some research on the Mofi unit and I’ll get back to you

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v0PqRhpG9OM.html

Perhaps this video could be helpful but it’s beyond my understanding due to the fact I have no idea of the mofi capabilities and connectivity

@@Reallydoood Thank you I did see that video and made the changes. I think Visible is onto to the MoFi usage and blocks it some how. when I made the change it would not connect to the internet at first then after about 2 to 3 minutes, it would connect but would use the TTL 64 setting. and all my devices would be capped at 5 MPS including my PC. The only way I can get my PC to go beyond 5 MPS is to change the TTL setting to default or 114 and run the CMD command again. I get the TTL of 114 is what my Visible phone uses when I ping Google.com. I kinda wonder if a Verizon user that has unlimited data uses for a TTL. once again Thank you for the reply.

@@larrygish2853 so it works with the TTL 64 but not others? Is the TTL 64 the "hotspot" setting?

No problemo. Go on my shorts and suggest my next tattoo . 😂😂😂

Anytime

Yep

@@Reallydoood hey, this didn’t work for me whatsoever, I’m using usb tethering as well, and it’s still limited to ~50kbps on my pc, the data plan is at&t, so idk what else I’m supposed to do

@@ClayishWall maybe att has a different cur hop limit number ?

@@ClayishWall I’d start there

You're welcome!

You’re welcome. Don’t forget to subscribe

Lol I believe was running vista 7 in this video , not typically tho .😂

@@Reallydoood been a while thats a rare os prob least popular as well

I bought the vista laptop from a guy for 90$ , for the sole purpose of linking my hotspot connection to my Xbox . Money well spent .

Not sure

The command is different, idk if there is a “command prompt converter” but if there is , that would be a good place to start the search

⁠@@Reallydooodwhat do you call this hack? Like what is the technical definition of what you’re doing when typing in this prompt? I know Mac has a command prompt but I wonder if you’d have to type in a different command to do the same thing.

@@brennerborec3422 go to chat gpt and have them convert what I type into Mac . I’ve done that before but I do not own a Mac so I’ve never successfully tested it

Get visible ! So worth it . It’s very affordable and reliable .

Maybe disconnect , do the thing , than reconnect ?

@@Reallydoood ok, I'll give it a shot. When I type it in it says it can't be found but in the reply it leaves out " netsh". What should the line say infront of what I'm suppose too type?

@@SoulDevider honestly, it kinda sounds like you are doing something in the process wrong . Just watch slow and do it one step at a time . Definitely remember to run your prompt as admin

I have the hot spot turnd off. After typing it in the text, the following command was not found. I'll keep playing with. Thank you so much for your encouraging help

Put that thang in sport mode 😂😂

Eeeehhhh I dunno

😊❤️❤️❤️🙏🙏

I use this on windows 10 regularly without issue . what are you saying your issue is ?

Not that I am aware of

Thank you .

There is , I just don’t know it

Idk if this works with att sorry bro

Get visible it’s 100% a better deal

Sure, you’d just have to know the Mac script , which I do not

Sure, you’d just have to know the Mac script , which I do not

Subscribe ! 😂😂 I need 1k

It works great for iPhone but I only know how to do it through windows for the computer side of things . Just buy a cheap laptop off eBay for it

You’re almost certainly doing it wrong .

Remember to run the control prompt as admin

@@Reallydoood I do up until recently it worked

It still never resolved ?

works but vpn app blocks it somehow at first, so run before your vpn and it works 4/24/2022

Should work the same way for ps5 , not absolute but *should *

@@Reallydooodwhat I mean is that there is no command processor, that’s why I’m asking, is there any method to bypass the speed limit on ps5

@@itsmax2761 oh , I’m not really sure about that one .

Unlimited means unlimited as far as I know 😂😂😂😂😂

@@Reallydoood thats what I thought

Is your work phone through us cellular as well ?

It’s all in the fine print . If ya agree to it , it’s not really a scam as much as it is just a bad deal some times.

Restart probs

@@Reallydoood ok

@@RSG2715 make sure to use admin for the command prompt ? It works , I just used it not long ago at all

@@RSG2715 what part isn’t working ?

​@@Reallydoood I used the CMD as Administrator, entered the instruction. It says OK although still keeps the speed limit to 5 MB. It pushes till 8 for couple of second and drops back to 5 again.

@@RSG2715 did you try 64 instead of 65 ? Also try restarting your internet connection after/before using the command

Ayyyyyyeee ! That’s what I like to hear

Your welcome , subscribe!!!!