VERY Deep, Sharp and Stretched Dent Repaired by PDR Needle Tip Tool 

Marty taught me how to fix these. His top secret magic techniques and tricks are the best ever. I fix real sharp nasty hail like this super fast. Couple of days ago i fixed a dent like this in 10 minutes. Super clean and nice. Thank you Marty. I think of you and thank you every single day. You definitely changed my life to the best.

Love this guys approach and confidence from experience. We need a Topgun, BillyBondo,Fitzee colab video series. Touch their like thingies and that's got er dun . 😂

Cool, sounds great. You are a great teacher for the PDR workers

All your videos I learned a lot. Thanks master😊

Thanks Marty! Very well explained as always. You are an excellent tech and teacher!

Thanks again Marty. I've been concentrating on the Fairmont method. Your a true Craftsman and An inspiration to Us All .

Besides great skill you also show impressive instructor talent. Straight to the point, explaining every step and encouraging. Thank you for your time and effort to make high quality instructional videos while remaining very humble and simple person. I have seen a few vids on RU-vid and many of them just brag about their greatness. You are very different. I really appreciate that and God Bless!

Thanks again for yet another great PDR demo !

Love your teaching method. Could listen to your voice for days haha.. Thanks for sharing!!

Thanks so much for your lesson! I’m just starting, I understand only about 30% of your speech (I live in a non-English country). But how you put the camera and how you show the work gives understanding 95% more than most videos in my native language. (Text translated by Google translator :) )

excellent work ,excellemt set up

Love this guy awesome information

Best teacher I've seen so far. Look forward to doing dents real soon!

Thank you so much for the videos. I work at a used car dealership in a PDR position, and your videos really help. I can fine tune a lot of techniques I use because of how you explain everything in great detail. Also being honest that not every dent is 100% fixable is nice to hear.

BEST VIDEO !

man, I love your tutorials and explanations thank you so much for pushing me forward!!!

I wish it was a closer video with maybe footage of what you doing with the tool underneath to show me where you start. Great vid. Thanks Jon.

A true craftsman at work. Awesome stuff. I love your channal and teaching methods. Thankyou very much.

Watched it right to the end great stuff with I could do this. Not in the industry been an Electrician all my working life. Many times I've tried to do panel repairs with some success to some extent. Think every man to his trade and if you have a passion for it you should do well. Loved the way you explained it all.

thanks great video. how about using glue pulling instead soft tip pushing? and could you tell me the tempereture when using heat gun on the panel, please.

Nice video! Also the wetsanding part. A lot of techs don’t show the wet sanding part on video. Personaly i like tolecut the most for sandin the clear.

Thank uuuuu so muchhh💕💕💕take countinue man

Great video this is very helpful 👍

Marty is the best of the best. I went to his school aug 2019. Fantastic. This is clark btw. Use an alias so students dont stalk me.

Outstanding.

I'd love to see split screen of the tool side while this is happening.

Your voice is do calming. Thanks again..

Wat a good way to get the message a cross to people

Thank you for your knowledge yet again! I tried using the soft tip first on a stretched dent the other day and it really helps get the depth up to see the bottom MUCH better before going to sharp tips. Much cleaner and faster. Just don’t go too far like you said.

Nice work buddy worth subscribing 👍

You da MAN !!! Better be thinking of halibut fishing in the spring 🙂

Hi Martin. Could you please post a video of how you attack high spots on the panels. I'm having a lot of difficulty with it and I've mangled my Mercedes little bit 😑

great video...

wow, impressive.

Muito bom

HI Marty, i just want to try this close connect push's i will make very small needles together round end make push tool i really want to see if this method will do the job, i do not know maybe its fantasy but i want to try

I used to do it that way 20 years ago too, Fellas start from the middle and get a few shallow pushes first so you dont end up with that pit or worse cracked paint with a pit and you wont need to sand it then either.

It would have taken me 8 hours and I still wouldn't have gotten it to perfection like yourself. It's definitely a art

Marty, thank you very much for putting out this instruction video! What knock down tip are you using here? Seems like it was not leaving marks in the paint?

how much do you charge to do this program. I'm very intrigued by this I think it's so cool

Subscribed.

Greetings from Chile, I push from the center but it looks very bad, I end up lifting a lot of metal and in the center I have a small dent, what advice would you give me? Thank you

I've had a few requests to show a detailed look of the super sharp whales I use, so I'm making a short video that will go into detail about this.Should be up soon.

Take your time ,is good tip 👍

Marty., Thanks for sharing nice repair . Not many can do that. So how would you deal with one, that deep ,under a brace ? That's usually my luck it's under my brace.

Great repair and tech explaination. Thanks for the share.

the bolts from my gate scrats the whole passenger rear door of my car and put a nice dent in it what do you recommend ill send pictures if needed

is there any way you can make a tool side view or image of the tool at work at the underside?

Wish we could also see where it is being pushed on the underside.

I really wish I could see exactly where you are doing the pushes. Not sure how you could do that but the pattern you use is the key and we can't see it. How far from the peak are you going? Are you going always in line with the light line? Fascinating to watch.

Is ther any way getting camera under hood just show rod I'm new to this

Auction speak louder than words

Marty what tool did you have needle tip on? Thanks

Im a subscriber !!!!

Can you draw on paper what the pattern of the needle tip is doing under there ... I don't understand what gathering metal means ... :(

hello, wow great video friend will there be possibility that you put subtitles in Spanish to understand them better? You are a great repairman. Thanks, friend. Greetings from Mexico City

awesome video marty, is it quite common and accepted to have a very small pit/low on a repair this stretched?

This is one legendary repair. Marty, are you working only on small area in the deepest part? You are working from center and outside in small spiral?

can something as deep or even deeper ( hit by 5mm round bar its 3-4mm deep and 15mm diameter ) be done with glue pulling? its in the arch above the door so no access

it would be helpful to see the bottom action view

Would this also apply to an aluminum panel sir ???

Im off to a dent tech next week. Im not confident enough to attempt it myself Is there any way to let him know i almost know what i'm talking about without looking like a know it all idiot. how do i spot the quacks from a good tech.

So where is the stretched metal going? Colour sanding ok but what happens if the paint has a clear lacquer coat?

Just hard to get that last little pit. Especially if the paint Finnish is really smooth and you want to keep it that way

A dent that hasn't been sitting for that long such as this will almost always come out easier than one that has let sit for a long period of time.

Marty, can you explain more on that? Sharpening the whale tail

Hi. The first thing the video sais is to watch the part 1 before watching this video but I don`t find it. Can you share the link to this video?

💥 Nice Work ✅ Shot Gun Not BB Gun💥

I have a question for you I have a 2014 Ford Mustang the front passenger Fender Has two deep sharp dents where the body line are. If you look at a picture of a 2014 Mustang it is the 2 distinct Body lines that run along the base of fender Do you think That that will be able to be removed. I know it's kind of hard to say without seeing a picture. I'm just asking if it's possible

Por favor traducirlo en español

be nice to see the lever as well as the dent moving, i keep looking off the bottom left of the screen to see how much pressure , angles etc...in any case , thx. very good tutorial otherwise...i have learnt much.

Very good job 👏 how can I get in touch with you to buy some tools. Thank you in avance 👍

Your definition of "Stretched" and mine are very, very different. What you are showing here is not "Stretched" by the old school definition. In order to be legitimately stretched, the metal has to be pulled beyond it elasticity. If you can straighten this without using heat shrinking, or at least a shrinking hammer, its not "Stretched" It just needs some stress reliving to get it to go back home. And by heat, I mean real heat. Circle the torch to the stretch, as soon as the metal glows you tap with the shrinking hammer and finish the shrinking by rapidly cooling with a wet rag....the paint will be burnt off. Real stretched metal cannot be PDRed. All that said, I think you did a really nice job on this one. I see PDR as the ultimate refinement of old school metal finishing. I am learning a lot on the subject from your channel.

you know you can make your own polish via white jewlers rudge you can buy a bar from a chrome shop or truck stop i hope. no offense.

What grit of sandpaper was that ???

I'm no expert but isn't using heat on needle tip or bare steel tip behind the panel will poke the paint? What I've noticed, using heat only on rubber or covered tip so easier to move the metal. And don't use heat when using bare needle tip without any cover so it won't poke the paint 🤔

Why don't you show the dent pusher from behind the door dent to see how you push the dent up, they always ownly show it from in front the dent never from hehind the panel.

If possible would love if could get it just hand work rather learn this way old school every o else blends it out into one big dent if customer.er cant see it jobs done I'm just self taught buy your vids so.e tools got at car boot sale I'm fiber optic trade which is a good job but I'm type guy likes put effort in his work see customers face att end of the job got mu head around crouns but I want be at stage were can take dent out as you do straching metel but I know it my hand work I will get more tools when covid passes get bk to work old school if learn that rest is gravy

I don't understand how a needle tip tool is used to gather up the stretched metal because you never show what you're doing underneath, you're only showing the results from the side you're observing.

Watching a man do the repair within 20 minutes... Asks local dent repair shop for similar (slightly bigger, but overall similar) work and cost/time... gets told "2 days"... 😂 I mean yeah sure, not all jobs are similar and some could take longer. But c'mon... 2 days and the dent is on the lower part of the rear door so should be accessible when removing the interior panel. 2 days. I don't buy it, and I didn't.

I don't think you are too picky at all. I love pdr.

We can’t see what you doing this too bad camera should be down where you working

You are not showing anything. The work happens in the back.

Your drama about how VERY this and how LOT that. And it would be BAD if this, or NOT WORK if that. These types of comments are a distraction from the technical points. It feels like trade school soap opera.