Glue Pulling Hail Damage - Beginner Glue Pulling Lesson

Подписаться 30 тыс.

Просмотров 48 тыс.

50% 1

In this video we will be looking out how to repair light hail damage using PDR (paintless Dent Repair).
This video is much like the instructional content you'll find at www.RealWorldPDR.com, the industry's #1 online PDR training site. We will take a look at the tools that we use, and do a step by step PDR tutorial on repairing minor dents using glue pulling.
As always we'd like to remind you that paintless dent repair is a skill that takes some time to develop and isn't necessarily suited for the standard DIY guy.
The tools showcased in this video:
Slide hammer
ansonpdr.com/collections/pdr-...
Collision Glue Gun
ansonpdr.com/collections/jim-...
Glue
metalmedic.com/pdr-glue/
Tabs
dentreaper.com/products/dent-...
Knockdowns
ansonpdr.com/collections/mari...
vippdrtools.com/products/vip-...
Sign up to www.realworldpdr.com and receive 100 dollars in Anson store credit.
If you're looking for a beginner tool list I have one available here:
ansonpdr.com/collections/jim-...

Авто/Мото

Опубликовано:

13 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@peglegtoo 3 месяца назад

This was oddly satisfying and relaxing to watch....

@rushmatic 8 месяцев назад

Just started watching this channel… you are a great teacher and thank you for sharing your knowledge bombs!

@leweyfountain8442 3 месяца назад

It was just about to cost me alot of money to get hail damage repaired and came looking for some video's to see how its done. Instead im going to buy some tools, practice a few times at the junk yard and HOPEFULLY save a bunch of money. Thankyou for the video's

@RealWorldPDRTraining 3 месяца назад

Good luck man!

@quentinlee2134 2 месяца назад

I will also be practicing at the junkyard... I mean my daily driver with no clearcoat left (or most of its paint for that matter...) maybe there are a few spots left that can still reflect light for dent removal!

@Demetrio_00 2 месяца назад

same here ! we making rich everytime the insurance we can do this own our own with out over pay !

@edwinmedina4338 7 дней назад

I'm 2 grand in for quality tools 😅 and still don't have proper rods! Good luck man let us know how it goes, I keep getting stuck on the last 20%

@Texas_Tornado_713 23 часа назад

Great Video Thanks!!!

@1bigpea 6 месяцев назад

Good to see you back Jim!

@mariacristinasantamaria54 6 месяцев назад

Great and very helpful video, thanks for sharing.

@chris-cx5nf 7 месяцев назад

Glad to finally see a new post! Hope you are doing well. I always enjoy your videos. They have been a tremendous help to me

@RealWorldPDRTraining 7 месяцев назад

Thanks man! We’ve been slammed all year with hail. We have more content incoming

@victorbarranca2910 8 месяцев назад

Jim, glad to see you posting again. Thank you,

@RealWorldPDRTraining 7 месяцев назад

Glad to be back! When this hail cools down there will be more!

@janobelo 8 месяцев назад

Always happy to see new videos from RWPdr…

@RealWorldPDRTraining 8 месяцев назад

We will make more!

@STGR1969 9 дней назад

Great video, thanks from Europe.

@jehlesmartrepair5980 6 месяцев назад

Good to see you again🫶🔥✌️ One more very good beginner You do Great🔥

@COPRZ28 5 месяцев назад

Nice tutorial!

@timothyarnold777 4 месяца назад

Perfect for a beginner like me, thank you Jim. Regards from across the pond. Tim.

@RealWorldPDRTraining 12 дней назад

Glad it was helpful!

@Demetrio_00 2 месяца назад

Good video 🤙🏻

@kylelambert1672 8 месяцев назад

Only been learning dent repair for about 6 months, but i really like glue pulling, especially on rails. I feel i can see the dents moving easier than on a panel that flexes more. 8ve also been finding myself getting a bit of feel for it, and adjusting how hard or soft i pull the lifter or slide hammer. Its really a finesse thing

@travislyon7046 6 месяцев назад

Flip your light on your rails. And then flip it again. Rails suck.

@RealWorldPDRTraining 12 дней назад

Absolutely! It’s so helpful when you develop that feel for the metal you’re working. Keeps you from over pulling like crazy too.

@diamonddetails9445 3 месяца назад

TYVM Boss 😮 you're an inspiration to us couch potatoes 😮

@jpanyk 8 месяцев назад

Big Jim. Nice to see you.

@RealWorldPDRTraining 8 месяцев назад

Thanks man! How have you been?

@jpanyk 8 месяцев назад

@@RealWorldPDRTraining thanks for asking. Still dragging along on this dent thing. Haven’t gotten much better. Life gets in the way. Need to get my head down and practice. Turning stuff down because they look to hard. I’ll work 3 hours on a baby dent After set up and drive time. No meat left on the bone. I’ll get there

@jbrown7403 5 месяцев назад

Very helpful!! Thank you very much…. I know what I’m doing this weekend! 👍🍻

@RealWorldPDRTraining 12 дней назад

Good luck! Take it slow!

@silviu487 7 месяцев назад

YOU are awesome! 😮

@RealWorldPDRTraining 7 месяцев назад

Nah! You are awesome for taking time to watch my content!

@vladimirpetrovich9929 6 месяцев назад

Красавчик мастер❤

@bigfoot2941 2 месяца назад

My ram just got hit yesterday i will be trying this windshield replacement 1st.

@RealWorldPDRTraining 2 месяца назад

Oof. Try it, but go slow. It’s easy to cause more damage if you’re not trained. If you feel like you’re starting to make a mess. Get some professional help. If the hail was large enough to bust your windshield there’s a good chance that this glue pulling technique won’t be right on those dents also.

@roberthernandez9034 7 дней назад

Is the VIP 1.0 dipped in rubber? The one for purchase looks steal while your tip is different

@khamessalhe113 4 месяца назад

Hi..How much does the hammer used in this video weigh?

@consciousrealitycreator8774 7 месяцев назад

Hi, thanks for the video, what was the ambient temperature of the panel? When you feel the glue with your nail, is it to see if it dents in the glue slightly, or seems like the glue is solid? Sometimes I get a great stick and most times it pops off too early.

@grandsea2 7 месяцев назад

First step clean panel and tab with clean lint free cloth and at minimum 91% alcohol if really dirty get the buffer out and lightly buff it(this will help the glue stick and also allow your line/fog board reflect better as a bonus)...second step get panel around 70-80degf, now apply glue and stick it to dent allow to cool until glue is no longer sticky to the touch...and pull... Not an experienced pdr tech so take this with that in mind and let's hang back to see what the real experts reply with to my comment!

@alexandruszilagyi1176 8 месяцев назад

Between keko ice tabs and reaper tabs, what is your favourite?!thanks and nice work like usual 🙌🙌

@RealWorldPDRTraining 8 месяцев назад

Same! They both perform perfectly, hardly break and pull hard.

@kerplunk38880 2 месяца назад

I wish you were located in the Dallas area. There's no one I can trust around here to do mine properly.

@RealWorldPDRTraining Месяц назад

I could probably help with that!

@michaelleal958 11 дней назад

Try Tony Rios from The Dent Stop! Top Notch work guaranteed 👌

@Alex-cg6zk 8 месяцев назад

👍👍👍👍👍Привет из Сибири ✌️

@olegsamoshin9304 8 месяцев назад

👍👍👍👍👍👍

@dillonhensell9738 8 месяцев назад

glue pulling was the toughest part of pdr for me to master

@RealWorldPDRTraining 8 месяцев назад

It’s very useful but it is a balancing act!

@drisnay 6 месяцев назад

Love your videos, if you were a turd you would be the shiznit lol.ive been working on my 2018 ram that was peppered with hail your videos help out so much and i love the jokes thanks for taking time to do your videos and explain wish i could have the technique you have

@RealWorldPDRTraining 6 месяцев назад

Thank you for taking the time to watch! That turd comment is one of my favorites now 😂

@hikhillz176 Месяц назад

helo any videos on correcting errors and how to fix those errors?

@RealWorldPDRTraining 12 дней назад

There are on the website!

@williamduignan6956 2 месяца назад

i wonder if barcardis 151 would work as a glue release?????

@RealWorldPDRTraining Месяц назад

Hahaha this sounds like a science experiment! Although isopropyl is awfully cheap…..

@bananza9860 Месяц назад

Hey I hope you still look at comments on these. I’ve been trying to find the answer for an hour now. Can I use glue pullers if I have a paint chip on the dent?

@RealWorldPDRTraining Месяц назад

No!!! You’ll rip off more paint

@bananza9860 Месяц назад

@@RealWorldPDRTraining oof. Any advice on what to do about a dent with a paint chip?

@planetaboy 2 дня назад

How do you decide when and how much you need to warm the panel before pulling a dent?

@RealWorldPDRTraining 14 часов назад

Something this small doesn’t really need heat. Also you can’t heat too much with glue or it won’t harden.

@UtwoBed 2 месяца назад

Is there any rule of thumb about what constitutes a dent that's too big for this method?

@RealWorldPDRTraining Месяц назад

It’s honestly more about the depth or sharpness of the dent. Very large repairs can be completed glue pulling. Very small sharp often cannot

@Texas_Tornado_713 23 часа назад

Can this method work with door dings/dime size dents?

@RealWorldPDRTraining 14 часов назад

Yes

@SlavicandScandinavianGirlLover 14 часов назад

Will this work on big hail dents

@RealWorldPDRTraining 14 часов назад

Likely not on big hail dents

@jonathanrighetti5897 8 месяцев назад

Jim your looking huge brother, hope all is well. haven't spoken in a few years.

@RealWorldPDRTraining 8 месяцев назад

Thanks man! Still working hard at it!

@jonathanrighetti5897 8 месяцев назад

it shows@@RealWorldPDRTraining

@KillMe-ib4yk 4 месяца назад

why arent you using rods for the first dent? sorry im a noob

@RealWorldPDRTraining 12 дней назад

These were very small and in a difficult to access area. Sometimes I just skip the rod work and head to pulling if they are small and “soft” like these were

@CakeFladudle Месяц назад

ive tried exactly the way your demonstrated on my 2020 accord and the dents won't pull out...

@RealWorldPDRTraining Месяц назад

Real good chance there’s more going on with those dents than what you see demonstrated here.

@goleft4088 Месяц назад

Just be patient, don't give up, try again after a while.

@1stPaintlessDentRepair 7 месяцев назад

Sir, why my glue tabs dnt pull like that small dings? In your video, it looks very easy but in reality it is very hard to do. Guide me please.

@RealWorldPDRTraining 7 месяцев назад

Are you cleaning the panel? What kind of glue are you using?

@1stPaintlessDentRepair 7 месяцев назад

@@RealWorldPDRTraining yes i always clean my panel with isopropyle alcohol. I use INGCO company hot glue gun rods. In my country it is the best one as i have compared all companies glue rods strength.

@virgiliovidal9169 4 месяца назад

@@RealWorldPDRTrainingwhat was it that you sprayed onthe glue to remove it from the car?

@mariaross458 6 месяцев назад

🙃 Promo>SM

@wrcvtm4132 4 месяца назад

Why you dont use a hammer ? That is a pipe ?

@RealWorldPDRTraining 4 месяца назад

I’m a little confused. What’s a pipe?

@wrcvtm4132 4 месяца назад

@@RealWorldPDRTraining i don't know that tool you are using onestly . I am not mecanic or something like that. I mean the tool you are using to hit in the special tools. Anyway your job is amazing!