Vespa Starter Motor Rebuild - Electrical Starting Troubleshooting - Vespa ET4

Подписаться 3,4 тыс.

Просмотров 8 тыс.

50% 1

Detailed tutorial on how to rebuild a common starter motor from a Vespa.
SUBSCRIBE NOW: / thescooterbud
In our motorcycles, you usually either have a kick starter, you initiate the engine first cycle with the strength of your kick, or an electric starter.
Sometimes starter fails us, and it needs to be changed and rebuild. It seems to be a difficult task but it’s actually not too complicated.
It is possible to rebuild nearly every starter motor in use on a motorcycle or scooter.
I also go through some electrical starting troubleshooting like checking the starter relay as well as all the terminals like the grounds connections and the ones in the battery.
⚠️ NOTE: Use only Aluminum Oxide
Sandpaper 600
-----------------------------------------------------------------------------------
⏱️TIMESTAMPS⏱️
03:43 Step 1 - Check the Battery
05:56 Step 2 - Check the Relay
07:57 Step 3 - Check Starter Clutch
09:53 Step 4 - Ensure Starter is Functional
04:10 Step 5 - Check for Wiring Problems
11:59 Perform Assessment
23:27 Assembling
26:45 Test
-----------------------------------------------------------------------------------
⚙️ PARTS NUMBERS:
PI82611R5 - Starter PIAGGIO
PI82612R0 - Starter Segment PIAGGIO
PI58115R - Starter Relay e-starter, 12V-80A
-----------------------------------------------------------------------------------
🛒 LINK TO PRODUCTS USED/MENTIONED:
►► CRC 05018 Lectra-Motive Electric Parts Cleaner - 19 Wt Oz.
amzn.to/3MiqOKk
►► JJP Wire Brush Set 3 pcs, Brass/Stainless Steel/Nylon Wire Brushes
amzn.to/3pzkcyg
►► Southwire 10037K Electrical Test Kit with Full-Function Multimeter
amzn.to/41uTgwT
►► Safety Glasses
amzn.to/3LWvS5C
►► 3M Wetordry Sandpaper
amzn.to/3LZWC58
►► NEIKO 01407A Electronic Digital Caliper
amzn.to/3VVhfnQ
►► Gardner Bender 79-600 Terminal Grease & Dielectric Silicone Compound, Tube
amzn.to/3py67RA
-----------------------------------------------------------------------------------
🎬 WATCH OUR MOST RECENT VIDEOS:
▶️ NEW Custom Off-Road Vespa!
• NEW! Custom Off-Road V...
▶️ Custom Vespa GTV/Sei Giorni
• Unique Vespa GTV/Sei G...
▶️ How To Install - Front Luggage Rack - Vespa GT/GTS/GTV
• How To Install - Front...
▶️ How To Install The Carbon Fiber Fender - Vespa Sprint/Primavera
• How To Install The Car...
▶️ Unbox/Review - Fanttik X8 APEX Tire Inflator
• THE BEST Tire Inflator...
▶️ NEW! Custom Project - 2019 Vespa Primavera
• NEW! Custom Project - ...
▶️ How To Install The Heated KOSO Apollo Grips - Vespa GTV/Sei Giorni
• How To Install The Hea...
-----------------------------------------------------------------------------------
New to The Scooter Bud? If so, here's what you need to know - I like to Restore & Customize Scooters a LOT, so I use this channel to explore, learn and show you everything in detailed to help you create the most unique scooter!
🚀 Join our growing community for new videos every week!
🔔 SUBSCRIBE & Don’t forget to turn on your notifications!
/ thescooterbud
🔎 Need help? Join our Discord server! 👾 We now have a Discord server for people to chat with the Bud and other fans. The server is open for all. / discord
-------------------------------SOCIAL-------------------------------
🌎 WEBSITE ►► thescooterbud.com
📸 INSTAGRAM ►► / thescooterbud
👥 FACEBOOK ►► / thescooterbud
-----------------------------------------------------------------------------------
⚠️ DISCLAIMER:
Some of the links provided in this videos might be affiliate links. If a purchase is made using that specific URL, I may receive a small commission. There is no additional charge to the order! Thank you for supporting my channel so I can continue to produce free content each week!

Авто/Мото

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@jamesnormand3742 Год назад

Wow. Good pace. Easy to watch and super informative in fairly short time. Does not waste our time showing lengthy cleaning steps, etc. Best video I have watched on my scooter issue.

@TheScooterBud Год назад

Hey! Thanks a lot for the comment! Aww thanks man! This comment made my day! Hahaha! Thank you! Peace✌️

@TimNassif Год назад

Great video that was very helpful in fixing my scooter problems. Thank you.

@TheScooterBud Год назад

Thank you so much! So happy to hear that! Thanks for the support! Peace ✌️

@MrJesses1981 3 месяца назад

Realy good instruktion video. 👍

@TheScooterBud 3 месяца назад

Thank you!! ✌️

@famous3d352 Год назад

Thanks for the how to video. Quite thorough and gives a great detail on the started rebuild. Is there any way you could point out where the loose ground wide is located? I believe I've got the same issue on my scooter. Everything is checking out and Ive never had issues with the starter. It just wouldn't start one day immediately after a ride. I was going right back out. I did get it to start while trying to check the voltage, and would like to be sure I get that connection secure before I get out on a ride and am unable to get it to start.

@TheScooterBud Год назад

Hey! Thanks for the comment and the support! For me was the little ground cable it's attached to one the CVT screws on the cover right next to the Variator air vent, mine was lose on the frame nut, make sure both ends are nice, tight and corrosion free, and also check the one it's next to the battery on the frame. Hope it helps! Peace✌

@MrNatalie2002 2 года назад

Very nice job, thanks for sharing,👍🏻.

@TheScooterBud 2 года назад

Thanks for the comment and the support! Appreciate it you! 🤙 Peace ✌️

@Geroslav76 Год назад

Good job, thank you

@TheScooterBud Год назад

Thank you!

@davidclark682 9 месяцев назад

Pulled my starter on my GTS250IE today. Did everything as described here. Armature and brushes were filthy and cleaned up. However brushes were worn down way too much. Thought I’d reassemble it and bench test my work even though I wasn’t going to use this worn out starter. BIG PROBLEM trying to get the two long screws to go into the far end cap because the magnets kept pulling them out of position. I could get one in but not the second one. Any secrets? Thanks.

@nievesruggiero5373 5 месяцев назад

Sir one question why does my Vespa when shaken don’t move together with the inner parts ?

@TheScooterBud 5 месяцев назад

Hello! Not sure what do you mean!?

@nievesruggiero5373 5 месяцев назад

Sir why does the Vespa inner parts don’t move with the outer part?

@TheScooterBud 5 месяцев назад

Hello, thanks for the comment! But I don’t understand, what exactly do you mean?

@Rudy308 5 месяцев назад

My Vespa motor is not turning. I clean the variator, clutch and kick start. Everything looks ok but still not turning. I didn’t have to put any tool to hold the variator for not moving is not turning. I don’t want to keep taking things out that is not need it

@TheScooterBud 5 месяцев назад

Hello! thanks for he comment! So what you're saying is your variator doesn't move at all? that's strange, you may have something else going on there... not 100% sure since I'm not an experienced mechanic on Vespas but it could be something with your piston or crankshaft or something else, I've never encounter with this type of issue, but this video is about fixing the starter motor if it's not fully working when the electric start button is pushed, but by what you're describing it may be something else is no related with the three main things to check first when a bike is not starting which is fuel, air, and spark... if you're not sure what you're doing I recommend contacting a local mechanic.