This auction Crown Vic had a broken gear shift indicator when I picked it up last month. Luckily I was able to repair it quite easily and in this video I will show you how.
This was incredibly helpful. When someone mentioned the word "transmission" I hit the internet and found this...sure enough, it was the problem. Cannot thank you enough.
Also I took the traction control button off my 2001 Vic and put it on the hidden traction control plug harness. When I hit the button it blew a fuse and also killed the relay inside the instrument cluster. No bueno...Bueno... radio or windows until I wired a work around. Thanks for your great content 👍
Also even if you put a traction control button you still won’t have TC. It just comes with wiring for it but they don’t actually have it. The crown Vics that did have a different brake set up.
Thanks for imparting more lore on our vehicles. Btw the little black clogged wheel on the gear indicator plastic yellow piece you screwed back in is for fine tuning the indicator needle, done with lever in park, then rotating it to where it’s exactly centered. Just a minor point that I saw elsewhere on the ‘Tube.
Hey Mike... great video. I have a 2008 Crown Vic Interceptor that I want to sell and want to fix the gear shift too. my problem is that there is a 2 minute delay putting it in gear. I have to wait to hear a little click... I've dealt with it for 5 years but in selling it I want to fix it for the next person. the car also has that kill switch but underneath.... ANY SUGGESTIONS HOW TO TELL A MECHANIC TO FIX IT. ... THANKS
I was sort of hoping you would have to go a little deeper glad yours was an easy fix for you mine how ever is a little different I have a 2001 towncar nice car 490,000 miles son it and it still run like a top my problem is the spring on the cable that moves the pointer can't find were it attached to I have everything out of the way ,any ideas thanks lost the dash for now Ed
Hi there, i just bought an '09 cvpi and i was wondering if you ever got the traction control switch for it or got it working somehow? Mine has the same panel with pedal control switch but no traction switch.
Most grand marquis come with the peddle adjuster and no the traction control would not turn off just from wiring in a new trim piece I’ve tried in my 2000 marquis
I have a 2011 crown Victoria police Interceptor and it does not have cruise control, my question to you is how hard would it be to install a cruise control on my crown Victoria that does not have it..can you make a video on how to install one?. Thanks
you have to get a steering wheel with cruise a tan one is on ebay for 100 rn and u have to get your computer flashed by a shop or dealer to enable cruise control if youre on an 08+ crown victoria, older ones need an abs pump with cruise or something like that
I have to wires/connectors coming out to the trunk release slot on the dash there. One has a sticker that says ignition? Do you know of why there is 2 or which should be used?
There are a few places you can mail it to and they fix it and send it back for like $100. I had to as well for my 2010. But my biggest pain has been the horn. I think they disconnected it so I've been trying to find where to fix it. They left an air horn working at least ha ha.
****PLEASE HELP!!!**** The black screw attached to the black cable is broken in half (the black "screw" is what goes through the black adjustment wheel in the dark brown bracket) I can't easily just glue it back together, it wasn't a clean straight line break, there's a teeny tiny chunk missing from the screw. Kindve like when you chop down a tree, that triangular cut out shape before you yell "TIMBEEEEERRRRR!!!" 😂 but seriously this has been really hard to fix/rig Is there a way to fix/rig it or do I need a whole ass new gear shift indicator set, because I can't find a single one anywhere on the internet. All discontinued and out of stock, unless anyone has *A SAFE UNALDULTERADED VIRUS RIDDEN* website link 😂 Please help and thank you!
