Vintage Brace & Auger Bits - Buying, Sharpening & Restoring

Подписаться 100 тыс.

Просмотров 75 тыс.

50% 1

Vintage Braces and Auger bits are readily available to buy at Car boot sales, Flea markets, Ebay, etc and for pretty cheap too
They come in various makes and sizes but also share a lot of commonalities in terms of their use
They are great for Bushcraft projects, Green woodworking projects, etc
In this video Lee Stoffer teaches you to what to look out for when buying as well as detailed advice on how to restore and sharpen them so you get the best use out of them using some simple tools
To connect with Lee
Blog - www.covertcraft...
Instagram - / stoffercraft
To read a blog post on the different varieties of Auger bits
www.theluddite....
As always I appreciate you watching
Take care
Peace
Zed
---------------------------------------------------
[Blog]-- zedoutdoors.com
[Twitter]-- zedoutdoors.com...
[Facebook]-- zedoutdoors.com...
[Instagram]-- zedoutdoors.com...

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@rebeccamascull9016 Год назад

I've just watched this video to help me research traditional carpentry skills for a novel I'm writing set during WW2 and it's been incredibly useful! I didn't really understand how braces and auger bits worked until I saw this demonstration. Plus I now know how my character would clean and sharpen them too. Thanks so much! Brilliant video and so informative.

@Zedoutdoors Год назад

Hi Rebecca, I sincerely appreciate your kind words and to hear this viedo helped you in some way. Am also fascinated to hear about your novel! Wishing you the best with your writing moving forward and take care ~Peace~

@PatrickMatherne 2 года назад

Just inherited one of these from my father, and it may have come from my great-grandfather. Will be nice to get it working again. I remember playing with this, randomly drilling wood with it (that I probably was not suppose too)

@Zedoutdoors 2 года назад

Oh wow thats awesome, no doubt the quality of the set you have will outlast us all! ~Peace~

@SkylersRants 4 года назад

Thanks, that's a really good demonstration of sharpening auger bits of different kinds.

@Zedoutdoors 4 года назад

Sincerely appreciate you watching and for your kind words ~Peace~

@OldJimboX Год назад

I really enjoyed this video. because of the depth of the information. My set of ring topped augers were used for barn building in Saskatchewan, and then left hanging inside the last barn built. Having timbers attached by wooden pegs instead of metal bolts allowed the barns to stay up despite the expansion/contraction of wood during brutally hot summers and cold winters. some for a century. I had to "pull the pin" and race to a barn On a tractor not a horse), when I was haying, in order to avoid a summer hail storm. That's when I got the farmers' reverence for a stout barn. Hail on the prairies is golf ball size or larger, and lethal.

@Zedoutdoors Год назад

Sincerely appreciate the kind words and to hear you found this video useful. Was also fascinating hearing yoiu talk about your barn! stay well my friend ~Peace~

@cicicamino7379 5 лет назад

Great video! Thank you. I’m about to restore an old auger and this is so helpful.

@Zedoutdoors 5 лет назад

Oh nice do let me know how you get on Cindy ~Peace~

@cutterdog655 4 года назад

Excellent demonstration! I’m about to restore a Stanley brace with a little more surface rust and two bits. I am more confident now. Many thanks

@Zedoutdoors 4 года назад

Thats awesome to hear and do let me know how you get on! ~Peace~

@ecaff9515 5 лет назад

Excellent video and process. Really love the tutorial. It is a great day when you pick up information from a professional woodworker who has a passion for vintage hand tools. Thanks for sharing.

@Zedoutdoors 5 лет назад

Amen to that and I sincerely appreciate your kind words thank you ~Peace~

@philiprowney 6 лет назад

Great choice of tools, I still have my dads Brace, a 1/2 and 3/4 inch auger. Mines a Stanley from the 70's.

@Zedoutdoors 6 лет назад

Very cool, tools like these are relatively new to me so eager to learn & share what I can ~Peace~

@markharris5771 5 лет назад

I’ve just bought my first brace and a three augers, this has been phenomenally useful thank you.

@Zedoutdoors 5 лет назад

Thats awesome to hear Mark, indeed Lee's tuition helped me refurbish my brace and auger bits too ~Peace~

@LBCAndrew 3 года назад

At first glance, i thought that newspaper was showing someone playing baseball till i noticed that was a cricket paddle (i know what it's called). I recently was given a bunch of these augers and two braces that belonged to a friend of my Grandfathers and was looking at cleaning up and sharpening the augers. Already got the braces cleaned up. They're approximately turn of the century old (1900 not 2000). I went with some real tung oil on the wood and they came out great. took quite a few applications though.

@Zedoutdoors 3 года назад

Excellent stuff, indeed it;s amazing how common these are at car boot sales, etc and with just a little TLC they are like new again ~Peace~

@garywood702 6 лет назад

I use and maintain tools like this and always take the maintenance of them for granted. Great video and imo all the advice given is spot on. Well done!

@Zedoutdoors 6 лет назад

Thank you for watching Gary and for your kind words ~Peace~

@LeeStoffer 6 лет назад

Cheers for the feedback, I've only fairly recently started to understand the maintenance required on these types of bit by experimenting with restoring them, glad to hear you think I'm on the right track.

@frankcooper6118 Год назад

Great video. A lot of information. Thanks.

@Zedoutdoors Год назад

You are very kind Frank thank you ~Peace~

@elfpimp1 3 года назад

Love my bit brace. First thing I made sure to do was to NOT get one that was ever chrome plated. Those were cheapies. But man, once restored and you get some decent bits? Lookout wood!

@Zedoutdoors 3 года назад

Indeed yes buying these vintage / used is the best route to go ~Peace~

@kennewby01 2 года назад

Excellent video again! I’m off to sharpen my bits - cheers 👍👍

@Zedoutdoors 2 года назад

Best of luck Ken and many thanks for the kind words! ~Peace~

@jesseramos1561 4 года назад

Just added 2 braces and a set of irwin MainBor auger bits. 16mm - 4mm.pawn shop fantastic find.

@Zedoutdoors 4 года назад

Nice going Jesse, always a buzz whenh finding great deals on old tools ~Peace~

@tony1721 3 года назад

Excellent vid, ..love the explanations of sharpening, reminds me of when I was an apprentice…

@Zedoutdoors 3 года назад

Me and you both Tony ~Peace~

@boozoochavis7506 5 лет назад

Now where in the heck were you guys when I had to figure most of this out on my own?! Great video, so glad I broke down and got a brace and a handful of auger bits, and also an eggbeater hand drill as they come in very handy. That being said, I am NOT giving up on my cordless drill driver any time soon-great for the donkey work don't you know. Thanks for the great videos, and keep up the good work mates!

@Zedoutdoors 5 лет назад

Ah yes the cordless still has it's place! :) Sincerely appreciate your kind words and for watching thank you ~Peace~

@chippysteve4524 5 лет назад

Great video.Excellent explanations and camerawork.Thankyou guys. Another plus with hand drills is that it is very easy to drill to a precise,consistent,known depth e.g. if 20 full turns gives you,say, a 20mm depth hole then an 8mm hole requires 8 turns.

@Zedoutdoors 5 лет назад

Ah nice I didn't think about the correlations with depth so appreciate you sharing! ~Peace~

@LitoGeorge Год назад

Very enjoyable and informative video. Glad you're working on those focus issues, but otherwise a terrific and helpful effort here. I can see that I'll be revisiting this one multiple times in future until I get the hang of it. Much appreciated!

@Zedoutdoors Год назад

Sincerely appreciate the kind wrds and indeed yes, have lots to improve with my filming skills! ~Peace~

@Sheepdog1314 4 года назад

thank you...I have a brace somewhere, and loads of bits. Time to find them....thank you

@Zedoutdoors 4 года назад

Best of luck in bringing them to life! ~Peace~

@WUGGIT 6 лет назад

Zed thank you, great video. You really have it good, I can’t even buy one of Lee’s tools, and you just go to his shop and have him clean up your tools! 🤣

@Zedoutdoors 6 лет назад

lol!! never thought of it like that ;-) ~Peace~

@kevinthewanderingwoodchuck2586 6 лет назад

Great video. I have been collecting these bits for a few years know. Time to go through them and restore the good ones. Know I know what to look for. The brief sharpening tutorial was grear. Thank you so much for this Zed!

@Zedoutdoors 6 лет назад

Thank you kindly Kevin and best of luck with refurbishing my man ~Peace~

@mallorygarbutt6019 4 года назад

Really interesting, thank you for putting this together. Lee is very good at making it simple..

@Zedoutdoors 4 года назад

Sincerely appreciate your kind words Mallory and indeed Lee is a great teacher ~Peace~

@1stinlastout165 3 года назад

I tend to resharpen the end screw end square a little this brings then back to life by using a very small file with one cutting edge ! If not used to often paint some shellac on them this stops rust when not in use !

@Zedoutdoors 3 года назад

Appreciate the insight Kev thank you ~Peace~

@davidharvey5672 6 лет назад

Thanks very enjoyable video. I used these tools as a lad. Interesting to see so many types together. Great guidance from Lee. Cheers.

@Zedoutdoors 6 лет назад

Appreciate you watching and for your kind words David thank you ~Peace~

@stevekelley1179 Год назад

Great 👍 job

@Zedoutdoors Год назад

Thank you kindly Steve ~Peace~

@johnlord8337 6 лет назад

10* Good one. More bushies should consider having a soctch-eyed auger for making rocket stoves in log stumps, or making woodcraft chairs, benches, cot bed frameworks, or other mortis-and-tenon style woodcraft in their outdoor adventures.

@Zedoutdoors 6 лет назад

Very true, my hope is that more Bushcrafters learn and use about these old proven tools ~Peace~

@jarredpiri9166 3 года назад

Thank you very much zed for this video ... I have watched some of your videos, but this is the first time I have subscribed to your channel, your video is very, very helpful for me and maybe others too.

@Zedoutdoors 3 года назад

That is very kind of you to do so Jarred and a sincere thank you for your kind words ~Peace~

@randomfox9970 6 лет назад

Zed outdoors very interesting video I prefer the old tools myself that drill is usually 1930s I has one and a complete wooden hand plane fantastic tools I still use em but they is antiques 👌💕🐾🐺💪

@Zedoutdoors 6 лет назад

Appreciate the heads up on the date of these and like yourself I love the older tools, they really were made to last ~Peace~

@randomfox9970 6 лет назад

Zed Outdoors 🐾🐺💪💕👌

@ricksspringfield45 5 лет назад

Great tools to use....been picking them up at the flea market (B&B) for a couple bucks. Rusty Gold!

@Zedoutdoors 5 лет назад

Amen to that, i've been fortunate to pick up a couple of lots of these off of Ebay for dirt cheap too ~Peace~

@TheBeardx16 6 лет назад

cool ! This video answered quite a few questions on sharpening the 30+ drill bits that i have recently been given ,subbed !!

@Zedoutdoors 6 лет назад

Thats awesome to hear and yes even I gained the knowledge to sharpen the bits I have at home using Lee's advice ~Peace~

@TheBeardx16 6 лет назад

Are you on facebook Zed im sure our paths have crossed at some point

@BergRD 5 лет назад

Great video, knowledge, and acumen. Always good to review skills and info you've known for years but makes it worth it learning new things each time. Grats!

@Zedoutdoors 5 лет назад

A sincere thank you for watching and for your kind words ~Peace~

@RiverbendlongbowsOutdoors 6 лет назад

Majority of my tools come from second hand stores. Very good 👍 Yet to stumble on good scotch eyed bits though around here

@Zedoutdoors 6 лет назад

There's a few great outlets here in the UK that sell the scotch eyed augers and they're plenty in the woodworking events we have also, but know exactly what you mean how hard they can be to come by ~Peace~

@RiverbendlongbowsOutdoors 6 лет назад

Zed Outdoors yes they are I did a little video on budget bushcraft and people seem to like it. Check it out if you have time to ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yPCCRxqfKGs.html Found a little town in Missouri I'm anxious to visit. I here its loaded with old pioneer tools👍

@jonnywalker8471 5 лет назад

from what I've seen Irwin sells them along with tapered brace bits

@joshbabb7470 6 лет назад

Fantastic video Zed. Glad to see you back. I hope the tools serve you well. Thanks for the video. - Josh

@Zedoutdoors 6 лет назад

Thank you kindly Josh and hope Summer is treating you well ~Peace~

@lebensschueler 4 года назад

Best viedeo on Auger Bits on RU-vid! Thanks! Love your channel!

@Zedoutdoors 4 года назад

You are very kind thank you! ~Peace~

@danny117hd 4 года назад

Yep just picked up a wood bar brace with quick release wing nuts. I will put it back into service or hang it on the wall.

@Zedoutdoors 4 года назад

Nice going Danny ~Peace~

@danny117hd 4 года назад

You need a square nut for the really authentic look. photos.google.com/share/AF1QipMeKVobOiSv7SEqnCLSKC1EHPBX7CqRWKCRQtIFeEFFo9AYftHJ8NfYKd3rgd-cAg?key=NFlZdi1hLTVVYnAzaVY0NnJjckxENFpDZmNDOURR

@DubiousEngineering 6 лет назад

Lovely restoration and very educational video Zed and Lee! ... great work!

@Zedoutdoors 6 лет назад

Thank you kindly my man! ~Peace~

@dutchcourage7312 6 лет назад

Great Zedocumentary again (though some sharpness issues on the camera work were somewhat annoying at times, luckily you kept at it and got sharp shots of the important bits, so i don't feel like i missed anything important). And i find it rather funny that i very recently actually got a brace and an bit that does indeed needs work, so these tips and tricks will most certainly come in helpful ! … tnx for sharing to the both of you. Hope you have a blessed day ~ Peace ! … ps. if the wood bits on the brace are 'gone' you can most certainly just carve them with a knife? Not everything has to be a lathe job, just a knife and some elbow grease will get the job done more often than not ;)

@Zedoutdoors 6 лет назад

Indeed yes nothing stopping you from carving the replacements bits by hand, as always appreciate you watching my man ~Peace~

@craigmooring2091 6 лет назад

Very instructive. Thanks, Zed!

@Zedoutdoors 6 лет назад

Thank you kindly Craig ~Peace~

@SouthernRebelRanger 6 лет назад

I love vintage tools!! Good video, Zed, now get out in the woods!!!! LOL

@Zedoutdoors 6 лет назад

Yes sir!! ;) ~Peace~

@VamosViverFora 6 лет назад

My late grandpa was carpenter and he used to use it sometimes.

@Zedoutdoors 6 лет назад

Yes they are made many years ago but due to the high quality they still work today ~Peace~

@OldSneelock 5 лет назад

Good work on the restoration. 😆

@Zedoutdoors 5 лет назад

Thank you kindly! looks like you're up to some cool stuff yourself too ~Peace~

@channelsixtysix066 Год назад

Always use a brass wire brush. It will clean the steel, without damaging the finish or surface.

@Zedoutdoors Год назад

Appreciate the heads up thank you ~Peace~

@karloflaherty 6 лет назад

i love mine ,its a game changer

@Zedoutdoors 6 лет назад

Isn't it just! ~Peace~

@BrumCraft 6 лет назад

Great stuff Zed, Lee is a true master of his craft

@Zedoutdoors 6 лет назад

Thank you my Midlands stallion and hope you're well bro as haven't spoken in ages ~Peace~

@LeeStoffer 6 лет назад

kind words but I've barely scratched the surface really, I'll be an eternal student in the woodworking arena I think.

@guido-nl 5 лет назад

Great video man, thanks!

@Zedoutdoors 5 лет назад

You are very kind Guido thank you ~Peace~

@jeffreywalker5372 6 лет назад

Thanks for sharing!

@Zedoutdoors 6 лет назад

Appreciate you watching Jeffrey thank you! ~Peace~

@Howlingdingobush 6 лет назад

Really good video mate

@Zedoutdoors 6 лет назад

Thank you kindly Al ~Peace~

@kevinfield2162 6 лет назад

Zed you absolute legend. Just been gifted a large set of these last week by my father! peace bud (Woodsy Welshman)

@Zedoutdoors 6 лет назад

Nice going, like yourself I was eager to learn how to refurbish these so do let me know how you get on dude ~Peace~

@KaylynnStrain 6 лет назад

that is a great set you have

@Zedoutdoors 6 лет назад

Thank you kindly, looking forward to refurbing the rest of the augers and then using them ~Peace~

@paulmorris2690 6 лет назад

Great video mate

@Zedoutdoors 6 лет назад

Thank you kindly Paul ~Peace~

@roscocsa 4 года назад

If I can give a small video suggestion, try to get a LOT more light and shoot with a smaller aperture. That should increase your depth of field so you aren't fighting quite such a narrow zone of focus. Possibly get a longer lens and stay a bit farther away as I think you're hovering right around the edge of where your lens will focus a lot of the time.

@Zedoutdoors 4 года назад

Appreciate the suggestions as yes I learnt a lot from this filming this and how I would do it differently next time ~Peace~

@roscocsa 4 года назад

@@Zedoutdoors :) I hope I didn't come off as snarky or bossy. One of my favorite things is macro photography, and I have to tinker with stuff to get a whole spiders eye or something in focus. Great vid :)

@cactusbobaz 6 лет назад

Very good video, Thank you soooo much!

@Zedoutdoors 6 лет назад

You are very kind thank you! ~Peace~

@RuggedOutdoorz 6 лет назад

Tools that should be in every persons tool kit

@Zedoutdoors 6 лет назад

Amen to that ~Peace~

@najizein1566 2 года назад

Thank you for this video. I got a set of Irwin vintage bits and they were very rusty, so I soaked them in a citric acid solution for 24 hours . And while the rust is gone, the coating was gone too! Do you have any idea on how to put a coat on them again? And what kind of coating was there in the first place? Thanks!

@Zedoutdoors 2 года назад

Unfortunately reapplying the coat is very tricky and requires specialist equipment. Ideally you should have placed them in white spirit instead ~Peace~

@BTUsBTUs 6 лет назад

BRILLIANT!

@Zedoutdoors 6 лет назад

Thank you! ~Peace~

@briholt100 2 года назад

Thank you for this video. Do you have any advice for repairing damaged lead screws? For example, if you were to drop a bit and the tip of the screw broke off. I'm thinking they might not be reparable. maybe a weld?

@Zedoutdoors 2 года назад

Thank you for your kind words Brian, reg broken screws, because it's tool steel you'll most likely struggle welding it back on ~Peace~

@briholt100 2 года назад

@@Zedoutdoors Does a broken lead screw render the bit un-salvageable? my understanding is that without a sharp point on that screw, you lose a lot of precision

@Leftatalbuquerque 5 лет назад

It's odd to think that people with such pleasant accents took over the world!

@Zedoutdoors 5 лет назад

lol appreciate you watching ~Peace~

@jdeveau6718 3 года назад

Thanks for the video! I have obtained a pair of braces and a selection of bits. One of my problems is that the square end that goes in the jaws is rounded on a few bits. Any suggestions?

@Zedoutdoors 3 года назад

Theres not much you can do if that is the case, if anything is to file it so it is relatively square again ~Peace~

@channelsixtysix066 Год назад

Power drills and twist bits have never been a direct replacement for a traditional brace & bit. Nothing produces the fine cut that either an auger or a Forstner bit produces. The brace is far easier to use and accurate to place and keep in position.

@Zedoutdoors Год назад

Indeed it's a great piece of kit ~Peace~

@russcorbett3923 4 года назад

Thank You so much for A LOT of Great information in one video !!!

@Zedoutdoors 4 года назад

Thats very kind of you Russ thank you! ~Peace~

@adrianabshire 4 года назад

Great video and information! I’ve been looking at getting a brace and bit but didn’t know what to look for - there are so many at used markets here in the US and not sure which are good brands/models to buy. What files did you use for sharpening? Is ‘white spirit’ the same as Mineral Spirits?

@Zedoutdoors 4 года назад

Hi Adrian thank you for the kind words! reg the files they are called 'needle files' and reg white spirit yes in the US you guys call it 'Mineral Spirits' ~Peace~

@Ariovistvs 2 года назад

Is it normal that the upper part of the brace where you put pressure on is not in line with the lower part. I bought one where they are not in one line so there's quhite a wiggling going on when boring. Or is that i sign that the brace got bent? I hope you understand what I'm talking about, not sure how to describe ist unmistakably :D

@Zedoutdoors 2 года назад

I think I now wha yu're talking about, by the sounds indeed it sounds like the brace is bent ~Peace~

@66bigbuds 5 лет назад

The square tang auger bits are still being made by Irwin. Just contact Irwin tool.

@Zedoutdoors 5 лет назад

Nice appreciate the heads up Keith ~Peace~

@litahsr.8226 Год назад

Hey Will this work on modern hex Auger bits?

@Zedoutdoors Год назад

The principle is still the same for modern bits, just need to tweak it for the type of bit you have ~Peace~

@john196719670 2 года назад

What would white sprit be in the U.S.

@Zedoutdoors 2 года назад

I believe its called 'Mineral Spirits' in the US ~Peace~

@elfpimp1 3 года назад

I forgot to mention, the bit holder itself on mine was dipped in coca cola for 6 days (refresh the coke daily, drink unused portion) and came out looking like new.

@Zedoutdoors 3 года назад

Great tip as others have mentioned using coca cola too ~Peace~

@LarsKiel 6 лет назад

👍

@Zedoutdoors 6 лет назад

Thank you kindly Lars ~Peace~

@50guitar 4 года назад

Metal files only cut on the forward stroke. Pulling back, or trying to cut on the return stroke/pull, only dulls the file....to the point it becomes no longer useable. Otherwise, everything else was good.

@Zedoutdoors 4 года назад

Appreciste the advise Doug thank you ~Peace~

@benjamenplus10 6 лет назад

OMG I can't cope ! Soooo many "that's what she said" moments , PMSL

@Zedoutdoors 6 лет назад

Trust me I had to hold myself back and act mature in this one ;) ~Peace~

@timothymallon 2 года назад

2:20 its not 101n, its 10 in (ten inch)

@Zedoutdoors 2 года назад

Thanks Tim ~Peace~

@LBCAndrew 3 года назад

There's a bunch of times during the video where his OCD kicks in and he's trying his hardest to fight it. I know because i'm the same way. There is no such thing as a simple clean up of a tool. And I know as soon as you stopped recording, he pulled the wood piece with the worm holes off that brace didn't he? lol.

@Zedoutdoors 3 года назад

Many thanks for watching Andrew, indeed Lee is an absolute pro and has an incredible attention to detail ~Peace~