Тёмный
No video :(

Vintage Craftsman Air Ratchet Restoration 

Mister Odd Jobs
Подписаться 4,6 тыс.
Просмотров 87 тыс.
50% 1

This Craftsman Air Ratchet was a good challenge for me and was super enjoyable. For a while, I wasn't sure if i would be able to get it back together.
Thanks for watching and please subscribe so I can continue producing content like this. Thanks!
Check out the links below for products I use in my restorations!
Portable Power Station - amzn.to/3oOGCbd
Epoxy/Filler Mixing Pad - amzn.to/3bmCR9X
Cold Blue Solution - amzn.to/3BB3535
Saw Blade Lube Stick - amzn.to/3zwMf2w
UV Lights for Retrobright - amzn.to/3SkaPfI
Brush and Scrub Pad Set - amzn.to/3zwPiru
Cut-Off Wheels - amzn.to/3JpXr5E
SANDING AND SHAPING
Buffing Flap Wheels - amzn.to/3Q9yLRi
Quick Change Sanding Disk Set - amzn.to/3zTyFrz
Wire Brush Set - amzn.to/3JsJjIW
Die Grinder Burr Set - amzn.to/3SpGXym
Sandpaper Roll Dispenser Set - amzn.to/3SgqzQO
Metal Filler Compound - amzn.to/3BBY9L8
PAINTING PRODUCTS
Silicon Rubber Paint Pigment - amzn.to/3oTw9eG
Mica Powder Paint Pigment - amzn.to/3vBgGnk
Spray Gun Disposable Cup Kit - amzn.to/3bq05f5
Round Hole Plugs - amzn.to/3PaS23T
POWER TOOLS
Cordless Screwdriver - amzn.to/3JyVwvF
Plasma Cutter - amzn.to/3By3ZgK
Ultrasonic Cleaner - amzn.to/3zRv9ho
DC Power Supply - amzn.to/3zVRGty
Air Micro Grinder - amzn.to/3d4I86n
HAND TOOLS
P-Handle Hex/Torx Set - amzn.to/3JpTgXq
Welding Finger - amzn.to/3d1G9j8
Impact Driver Set - amzn.to/3vxzhjW
Pry and Puller Set - amzn.to/3zU96GM
Klein Wiring Tool Kit - amzn.to/3OVKv8O
Media Blaster Gun - amzn.to/3PYYRGT
Self-Setting Wrench Set - amzn.to/3PYFddQ
Deburring Set - amzn.to/3PVDMwN
Precision Screwdriver Set - amzn.to/3JryrLf
Soldering Set - amzn.to/3Jvxlym

Опубликовано:

 

25 авг 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 65   
@chrisblair3081
@chrisblair3081 Год назад
I did air tool repair for some years, now you can rebuild a majority of pneumatic things. Air ratchets are cheap and judging by the sticker id believe that's not as old as you think.
@misteroddjobs
@misteroddjobs Год назад
Thanks for watching and commenting!!
@chrisblair3081
@chrisblair3081 Год назад
Also a small propane torch is the preferred method for removing parts from the body. Id also avoid clamping your vise onto the pressed in bearings, your just making it tighter lol
@misteroddjobs
@misteroddjobs Год назад
Thanks for the advice. Much appreciated.
@jeffkimble8857
@jeffkimble8857 Год назад
It is definitely not “vintage”. That is ratchet probably from the mid to late 90’s.
@misteroddjobs
@misteroddjobs Год назад
OK Thanks..
@ivanstiles7030
@ivanstiles7030 8 месяцев назад
Nice job brother. I have an older 3/8 drive Craftsman air ratchet that I have to rebuild. This video will definitely help.
@bhagubhaimistry626
@bhagubhaimistry626 Год назад
Very hard work
@adelkhadawy8055
@adelkhadawy8055 Год назад
Good job . My regards from Egypt , yesterday i bought a couple of these ratchets and will start restoring them soon
@misteroddjobs
@misteroddjobs Год назад
Thanks! Please let me know how those restorations go for you. I would love to see the results!
@damniannoone2552
@damniannoone2552 Год назад
Excelente restauracion, muchas partes tiene esa herramienta alrededor de 30 supongo, mucha paciencia para armarla y pulir todo, aplausos 👏👏👏👏👏
@misteroddjobs
@misteroddjobs Год назад
Thanks for watching and commenting!
@georgebrown8312
@georgebrown8312 Год назад
Awesome job you did restoring that air ratchet wrench. I like it, and it works like a charm, too. Great work.
@misteroddjobs
@misteroddjobs Год назад
Thank you so much, I'm glad you liked it! Thanks for watching and commenting!
@richardrolph6166
@richardrolph6166 Год назад
It worked in on direction at least. It would have been good to see it go the other direction wouldn't it , in the UK in factories and large companies all air tools must be safety inspected , sadly this would not pass inspection
@stankrieger3598
@stankrieger3598 Год назад
I like your video, but I would like it much better if would tell us about your work.
@jamesrinehart3034
@jamesrinehart3034 Год назад
35 pieces. Awesome job
@GT_Racer347
@GT_Racer347 Год назад
Way cool. Glad I watched you do it, because now I don't want to tackle my own! 😂😮
@misteroddjobs
@misteroddjobs Год назад
Good call! Alot of fiddly parts in those things. I still had fun though! 🤪
@GT_Racer347
@GT_Racer347 Год назад
@@misteroddjobs Definitely fun, though frustrating at times. 👌
@cm5838
@cm5838 Год назад
Not so much of restoration but a return to service. If more people took the time to repair things there would be a whole lot less waste in this world. It looks good, but not so good you wouldn’t want to use it. Much better than the rattle can restorations plaguing you tube.
@misteroddjobs
@misteroddjobs Год назад
Thanks, Charles!
@joseluisarco9265
@joseluisarco9265 Год назад
Buena restauración
@acts2211
@acts2211 Год назад
Great job
@misteroddjobs
@misteroddjobs Год назад
Thank You!
@robdmau
@robdmau 2 года назад
I’ve watched most of your videos, I love how you still use the vise you restored a while back, what’s good stuff. Ever thought about selling any of these things you restore?
@misteroddjobs
@misteroddjobs 2 года назад
I hope to use that vise for the rest of my days. It may need another restro by then! Thanks. 👍
@YB_Hunt
@YB_Hunt Год назад
@@misteroddjobs you didn’t answer his second question would you ever thinking about any of the items you restore?
@SHOINOFF
@SHOINOFF Год назад
That liquid wrench is some good stuff isnt it.
@misteroddjobs
@misteroddjobs Год назад
sure is!
@JOHN-fx3xo
@JOHN-fx3xo Год назад
I watched. I was torn. Craftsman air ratchets are such a bad tool. But good video.
@TotoGuy-Original
@TotoGuy-Original Год назад
i love PCL XF
@misteroddjobs
@misteroddjobs Год назад
Thanks
@KIKOSHKA4
@KIKOSHKA4 Год назад
с шейки куда-то делись отверстия от клёпок, да сами лейблы на старом гайковерте подозрительно новые. Забивать подшипники молотком? Так это практический тоже самое что болт забивать.
@misteroddjobs
@misteroddjobs Год назад
Thanks for watching and commenting!!
@jackjaeger2189
@jackjaeger2189 2 года назад
That thing looks like it came out of the swamp. You kept pulling pieces, and another, and another and another.......
@misteroddjobs
@misteroddjobs 2 года назад
Flea market, swamp... pretty much the same thing! Haha. Thanks for watching and commenting!!
@greenskullfarva
@greenskullfarva Год назад
Why did you not blue the hardened steel parts again?
@petricabistricean1806
@petricabistricean1806 Год назад
Super tare 👍👍👍👍👍🍯
@misteroddjobs
@misteroddjobs Год назад
Thanks so much!
@abdullasalim6027
@abdullasalim6027 Год назад
👏👏👏👏👏👏
@misteroddjobs
@misteroddjobs Год назад
Thank you!
@yusufabdrahman592
@yusufabdrahman592 2 года назад
Good ii boss 👍👍😊😍
@misteroddjobs
@misteroddjobs 2 года назад
Thank you friend!
@oliverl8880
@oliverl8880 Год назад
Which cleaning solution do you use in the ultrasonic cleaner?
@misteroddjobs
@misteroddjobs Год назад
Dependsnon what I'm cleaning. In this video, I believe it was Zep Degreaser. Thanks for watching!
@demetriusUSN
@demetriusUSN Год назад
I think it’s 44 parts or so….nice work.
@misteroddjobs
@misteroddjobs Год назад
NICE GUESS! 43 parts total. Thanks for watching!
@andresdelafuente3783
@andresdelafuente3783 Год назад
Very very good!!👍🙂 ,,---",,
@misteroddjobs
@misteroddjobs Год назад
Thank You!!!
@robdmau
@robdmau 2 года назад
Right before you asked how many parts I was thinking the same thing. My guess is 37 pieces…
@misteroddjobs
@misteroddjobs 2 года назад
Good guess but a little low. Thanks south for watching!!👍
@robdmau
@robdmau 2 года назад
@@misteroddjobs low?? Dang it lol.
@michaelpage7691
@michaelpage7691 Год назад
41 pieces?
@misteroddjobs
@misteroddjobs Год назад
43, very nice guess!! Thanks for watching and commenting!
@GKRTANKLINESLLC.
@GKRTANKLINESLLC. Год назад
52
@arthur962
@arthur962 Год назад
What makes this "vintage" I have older air ratchets than this that I use all the time.
@Olexandr_UA_
@Olexandr_UA_ Год назад
Смазки в планетарку как украл.
@GeoffPesos
@GeoffPesos Год назад
This ratchet looks like it's been artificially aged solely for the purpose of making this video. That looks like a $20 air ratchet from Blowe's.
@misteroddjobs
@misteroddjobs Год назад
Wrong. Found it at the flea market like that. I don't appreciate being accused of being dishonest. Thanks for watching.
@chubbyschoices9701
@chubbyschoices9701 Год назад
47 pieces?
@chubbyschoices9701
@chubbyschoices9701 Год назад
Darn I was close
@misteroddjobs
@misteroddjobs Год назад
Haha, thanks for the comment! Fun stuff!
Далее
1910's Hand Crank Grinder Restoration
16:33
Просмотров 10 тыс.
Будзек и рецепт🐝
00:25
Просмотров 144 тыс.
Big Baby Tape - Turbo (Majestic)
03:03
Просмотров 221 тыс.
Antique Sulfuric Acid Milk Fat Tester [Restoration]
29:21
Rare Tap Holder Restoration | Mister Patina
22:36
Просмотров 384 тыс.
Rusted Micrometer, Will It Ever Work Again?
13:03
Просмотров 68 тыс.
Richards-Wilcox Wood Vise Restoration
10:06
Просмотров 15 тыс.
Air Ratchet Rusty Restoration - #restoration #tools
8:58
Restoration of a 1 Dollar Air Impact (Ingersoll Rand)
16:10
1930's Adriance Wrench | Restoration
19:46
Просмотров 247 тыс.