Virago xv250 how to fit slash cut exhaust pipe 

Albert Gooding thank yep was a little issue easily drilled off though. Have a bit more experience. Pipes still in great condition ride it every day. Thank for your comment

Lyric Edwards haha it's my pet hate people that don't list items enjoy dude

MC_JP DE Jens thanks I appreciate that I am working on another for a Honda at the mo

Cool what Honda ?

MC_JP DE Jens 1973 cb350four

Cool i'm working on a 1983 CB650 SC Nighthawk USA Import

MC_JP DE Jens haha what are the chances. Great bikes. Mines in pieces at the mo working on engine internals. I will link you to a video of it. Also a USA import

I have to say I haven't adjusted the car and never had any problems with mixture or the way it runs. I used a colour tune and it was burning a little rich but that's fine.

Laghzaoui Nabil really sorry I haven't replied sooner to this I missed your comment I didn't reject just turned our the mixture screw half a turn

These would only fit the 125 and 250 models the 700 has a very different engine shape sorry. Website link is in the discription they might have 700 comparably Exhausts there.

Robert De Cort I just richened the mixture a tad never have problems :)

thanks alot :)

-Bike Garage- I bought new ones they were super cheap they were metal crush washers so best to replace

TimSalsaNights thank you😉 i just ordered garage t&f drag pipes from webike😉👍🏻

Think it's a 96, all been painted since then that's the original colours take a look at my later videos

skuxxskits I would always use a new gasket they are super cheap to buy like £3

Yes I think I did pay some not makes those yes have done salsa once or twice there. Check out my site www.salsa-nights.co.uk have a large ball on in Jan

This is insane. Did you teach at the Centenary club by any chance ? I think you were my instructor along with a couple of others. This was maybe 4-5 years ago. I am trying to find information online and it comes to newarly 100 GBP on taxes,etc. The shipping from webike is arounf 98 GBP. Can you disclose how much you paid for them in total please ? Thanks anyway for replying !

I think at the time the import was about £60-70 but the pipes are still cheaper than the standard replacements from yamaha and they are far better mine look as good as the day I put them on. Sad I only ever guest taught there. I am Bridgwater based and worked Bristol Bath Devon mainly. Why not join us in Taunton for the Masquerade Salsa Ball. Find my site email me and trade numbers might be able to help with bike stuff to

That would bring the cost to nearly 200+70 (p&p) + 70 (tax), 340 GBP. They certainly do look the part, but I have the felling that for that price you could have probably have them custom made ! As much as I would like a pair since mine has been damaged ever since I got the XV, I simply just cannot justify the price. I took up salsa when I moved here for about a year, then the courses stopped I think and I had other commitments taking up too much of my time. In any case thank you for all the information !

Rick Holder the main earth can be bolted back to the bike in the same place that it was even when fake pipe is removed :)

TimSalsaNights thx

Yeah put up a fight had to drill it. Trouble is my bike was in a bad way when I got it and I owed it for ten years before I did this work. Sadly I have sold it now. Have another bike though. See my more recent videos

Timsalsanights aka The Caffeine Racer did you have to take the cylinder head off then if it was the back cylinder

@@garyconstant4234 nah was the front that was stuck on

Timsalsanights aka The Caffeine Racer ah yeah so you got to drill it out and re thread it or if ya lucky it will just spin out. It’s all sent to try ya but that’s biking for you 👍

@@garyconstant4234 a little cross drilling and it came loose thank fully

Have u removed the silver pod that was on the right side of the bike I believe there are a couple of Alan bolts to take out. Then a jubilee clip around the mouth of the air in take. The new one will fit over the intake and then just tight the jubilee clip it comes with and you are done. Check the Y piece yolk pipe that is the black pipe between the cyclinders if it has a crack it will leak air and that caused mine to not throttle correctly.

So i installed the new filter and now it's like it dont get enough air så when i full thorttle it dies What should i do with the black ruber pipes that conected to the Original filter? Becouse now i have only the new filter on

I just removed the black pipes does it run at full if choke is on. If it does it means u need to adjust ur mixture so it's a little richer as ur getting more air with that filter.

Imhavent tried that! i will when i come home from work :) thank you so much And how do i adjust rhe mixture? Sorry im a noob he he he ;)

diego ucan puc, I am sorry I don't understand your question try again

Yeah should fit fine

thanks mate! Think I might pick up one of those exhausts! And istall it during the winter so my baby sound great when the snow is gone!

Arvid i have them on my virago 125 but i had to adjust my carb

Lucky69 oh. what did you have to adjust?

the carburator i dont know how i had my friend do it or me

jhon napels nx

fieldmarshaljoe not fast 75-80mph top speed it's a cruiser and with no rear suspension the ride at 70 isn't very comfortable

TimSalsaNights thanks for the reply, just looking at small cruisers for the a2 license as opposed to a bigger restricted bike, need something that'll go across national speed limit roads on single carriage country roads without the Audi tailgating behind lol, all in all a good bike? Looks the part!

I have made a lot of alterations to the look since then will have to take a video with change in the next week, this bike does me well but if u want long distance or speed not for you. keeps up with traffic fine. I'm a firefighter I use it to get in to the station when I have a shout, its always got me there in good time even through traffic.

TimSalsaNights hahah I'm literally mid application for on call firefighter, and yeah I'd look forward to seeing a video of it

fieldmarshaljoe where are you based ?

74KU It's smooth not a thumper

Kelby Odom i didn't it still passes

randomname123 eBay or yamaha most good motorcycle shops can order them :)

I fixed on the exhuast on my 125 today i had gaskets that fit. And OMG that sound ; 0

ссылка находится в описании для вас, наслаждайтесь

ru-vid.com?q=http%3A%2F%2Fjapan.webike.net%2Fps%2Fxv250%2Bexhaust%2F%23%21search%26p.ref%3Dproduct-search%26p.k%3Dxv250%2520exhaust%26p.c%3D1001&event=video_description&v=byUjcknTVKE&redir_token=fUQtHpkuDTAzG0-lOHSsm4fPZhF8MTUxMDkxOTQ1N0AxNTEwODMzMDU3

Just remove the baffle screw and slide out the baffle :)

Mike Pagliuca well i believe they have the same fittings but the website i got them from had a compatibility chart as i remember

okay sounds great thank you, do you think ill have shipping issues over here in the US

Mike Pagliuca i would think in this day it doesn't matter where u are in the world i would consult the website for there conditions and costs of course. Thet still worked out far better value for me including shipping and import and a year on they are still in great condition.

how many

i am sorry i dont remember a couple weeks sorry it was 3 years ago now

Just ordered these and they took under a week to uk . Lucky for me I didn't pay customs chargers as some people do. Pay for 4 day postage they come via parcel force.

Nice dude 😊 they are still on mine just took off and stripped and cleaned the carb total pain to do. Ride safe

TimSalsaNights do you know the size of exhaust studs?? Think a front 1 needs replacing as flanges larger on these new exhausts

Haha yep go get that off best thing I ever did

Thank you! Helpt me alot!

At this point I would say take it to a garage have them set the carb up for you. Not worth running lean and doing damage. To complex to do over comments or do a search for a video there are a few on mixture adjustment