Vise Drill Anvil [Restoration]

Подписаться 1,1 млн

Просмотров 784 тыс.

50% 1

In this restoration I restore a vise drill anvil combination tool. This odd tool was manufactured by Rock Island Mfg. Co. from 1915-1930s when the company went out of business. You can see the original patent here: patents.google.com/patent/US1...
This tool was sent to me by a viewer in hopes of getting everything back in order. The only part missing was the "hardy" tool for the anvil, but those can be easily made. I would not recommend using cast iron as an anvil material though as it will most likely shatter. The entire concept of this combination tool is something that is not synergistic and is actually just a poor anvil, drill, and vise. Nevertheless, these are somewhat common and must have been popular with at least some number of customers.
I replaced all the old japanning with new coats of japanning. I tried to slap on more layers of japanning as an experiment to see if I could get a smoother finish. The anvil portion had some cracks that needed to be brazed and the vise jaws were machined off and completely replaced with soft metal ones. I personally use soft jaws more often.
To use the drill you have to turn one handle to advance the bit and another to spin the drill. It's a very odd experience, but neat nonetheless.
Since this tool was sent to me, I would love to pass it along one day, so if you are interested, let me know!
I would like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue
Podcast (with Jimmy DiResta and Andrew Alexander) - anchor.fm/fitzall

Хобби

Опубликовано:

9 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@arduinoversusevil2025 3 года назад

These where ahead of their time. We'd all have one rusting away outside the door if Billy Mays had seen this wizz-bang-gewgaw.

@OscarSturgess 3 года назад

what on earth is the man himself doing here down in the doobly do with but a 6 likes? shameful display

@HandToolRescue 3 года назад

You can also use it as a wrench if you are strong enough.

@arduinoversusevil2025 3 года назад

@@HandToolRescue *IT'S* *WHISPER* *QUIET*

@arduinoversusevil2025 3 года назад

Mosquito season just about over there in Saskabush?

@bobnotman5154 3 года назад

That contraption gives the term “keep yer d!ck in a vise” a WHOLE new meaning!

@1DY. 3 года назад

Headbutting the blasting cabinet cracks me up every time. As soon as I see him putting things into it I'm like... ooooh wait for it. The anticipation in this episode was intense ha ha

@TheCoffeehound 3 года назад

He sees you shiver with antici... ...pation.

@pauln2661 3 года назад

He should sneak in a montage clip of banging his head on the sand blaster screen from 5 or more older videos.

@roastingpeanuts 3 года назад

@@pauln2661 yes🤣🤣2

@johnathonmontie2234 3 года назад

Caught me off guard haha Pans to blasting cabinet: “Ok cool let’s blast some shit now”. . . . . . . . . *THUMP” “Jesus Christ, that had rebound” 😂

@ThePostApocalypticInventor 3 года назад

Just the other day I found a piece of railroad track and had the idea of making an anvil from it AND then braze a vise to it. Little did I know this already existed a long time ago.

@oldgreyman5994 3 года назад

That'd be a great video to watch!

@aboelishes 3 года назад

can't wait to see it!

@TreyCook21 3 года назад

If you weren't who you are, people would be saying, "That sounds dumb as hell!". Yet, here you are, being the who that you are and we should expect no less when left to your own de-vises.

@FOMI1970 3 года назад

Pretend that you didn't know and post a video ... we'll watch it.

@reigninoel 3 года назад

Hell, I'd watch that, new idea or not.

@donjohnson3701 Год назад

I have two of these trying to put together enough parts to put it together and now I find out that I am still missing the drill table! Thanks for the video of an excellent restoration and clearing up how it is supposed to look and work.

@charleshanson9467 3 года назад

That's like the "printer faxer copier" of the machine shop. Not really good at anything.

@MoraFermi 3 года назад

Hey, at least "printer faxed copier"s are great at one thing: wasting your money!

@xenonram 3 года назад

Printer fax copier is a horrible example.

@wtfiswiththosehandles 3 года назад

What? We have a printer/faxer/copier that is an absolute beast of an office machine, the only reliable tool in the factory.

@Nicmadis 3 года назад

But wait! It does more!

@steadfasttherenowned2460 3 года назад

@@wtfiswiththosehandles I think they mean the consumer models not the commercial ones

@andrewcarpenter270 3 года назад

when he turned on the mill, my power flickered, and I thought, 'man that mill takes some juice, eh'. then I remembered it was only a movie.

@barthanes1 3 года назад

Japaning always looks so good. If it wasn't so labor intensive I would like to use it on a vintage GE motor I'm restoring.

@Gr8DaneH 3 года назад

I inherited one of these from my Grandpa. Such an interesting piece of equipment. Mine is missing the drilling pieces, but the vice parts still work. The rail on mine is also bent, haha. I'm guessing they didn't design it to handle angry-farmer-at-2am-during-harvest ft-lbs. Nice job on the restoration, it looks fantastic. With the vice bolted to a table the drilling would at least make a little more sense. It seems like a big design oversight though that you can't clamp something in the vice and then drill it...I guess that would have required another set of threads and an extra crank, making this even more of an unwieldy Frankenstein's monster.

@kellyhill1265 Год назад

My thoughts exactly.just clamp your material and use a brace and bit to drill your hole being in the early 1900s a brace and bit is what you would use to drill anyway . So why incorporate it into the vice where you have to keep tightening the material with each turn of the drill? Seems like a laborious way to drill a hole even in the 1900s . But beyond that it’s a fantastic restoration of a redundant tool.

@tonymannion5743 3 года назад

Fair play to you including the accident with the tap - a lot of guys would edit that out in fear it would make them look less than perfect to their audience (you know who you are!!)

@richardlayton1603 3 года назад

I make a new one!

@scruffy6151 3 года назад

I was waiting for it to happen been there done that more then once. Those that never show things going wrong are only lieing to themself.

@NitFlickwick 3 года назад

I believe that would be Jimmy Diresta, according to his recent Instagram stories about editing. 😂

@Mister_Brown 3 года назад

@@scruffy6151 whats funny is we've all been there and done that but we keep doing it over and over cause hand tapping is painfully slow and most of the time drill power tapping works.

@1978garfield 3 года назад

@@Mister_Brown Just like Sex Panther "60% of the time, it works every time."

@aserta 3 года назад

I've always liked the 1910's to 1950's patent browsing. The number of ... weird, quirky, odd, sometimes adorably dumb things you find knows no end :))

@dimitar4y 3 года назад

Is there a youtube channel dedicated to showcasing the weirdest patents?!

@Shoorit 3 года назад

Imagine what the 1910’s inventor would think if he saw the patent for some of the crap on amazon.. or an iPad.

@davidsholts 3 года назад

Multi-tools have come a long way, they'll fit in your pocket now.

@clubsoda85cook55 3 года назад

Yeah but none of the ones that fit in your pocket have an anvil or a vise on them.

@Tinker001 3 года назад

Just need BIG pockets.

@MazeFrame 3 года назад

Beginning of the video: What is that good for? End of the video: Why does this exist?

@radracer2033 3 года назад

That has to be one of the strangest vises I've ever seen

@fourkings7897 3 года назад

Or drill

@fourkings7897 3 года назад

Or Anvil

@AnttiBrax 3 года назад

I have a theory... The drill part is not intended to be used by one person only. It needs two: one person holds the work piece while the other spins the drill and, at the same time, applies constant pressure with the vise screw. It's pretty pointless with wood but if you put a steel work piece in there it starts to make a bit of sense. I don't see why it would make sense as a regular drill. The vise bit is just a "handy" add-on then since it has a lead screw and all.

@tomt9543 3 года назад

@@AnttiBrax definitely designed by union people! A ploy to employ (no pun intended) 3 people to do a one man job. GENIUS!,

@isaiahshaffer 2 года назад

@@AnttiBrax I was thinking what you were, we also take things like battery powered tools nowadays for granted so If something was being done away from town/power you’d have a mini drill press available even if it took two people, tools weren’t exactly small or light back then, just judging by the way things are pinned and chained the idea very well might have been “portable”

@zippy-zappa-zeppo-zorba-etc 3 года назад

This guy has the coolest garage sales

@BH-rx3ue 3 года назад

For all who are wondering, to get a sand blaster to work at maximum efficiency, you must assert your dominance as demonstrated @5:18

@davidf7883 2 года назад

Every muscle in my body clenched during the tablesaw scene. My mind was screaming "Brace for impact!!". I don't even like ripping wood on a tablesaw, I can't imagine a 2X2 piece of aluminum. Bravo Sir!

@thomaslevy2119 3 года назад

You have the knack for finding and restoring the strangest tools. Would have never guessed that the vice-anvil-drill even existed. Keep it up!

@corydriver7634 3 года назад

I like this restoration because it reminds me of your earliest work, simple and short, but Lamp chain? Come on man you’re better than that. Definitely a specialty tool.

@tomasn3 3 года назад

Your intro cracks me up every time! I love it. Such a throwback and nostalgia if you were a kid in the 80’s and watched sitcoms. Bravo 👏🏼

@Thematt11 3 года назад

I can hear the guy selling this from a cart just yelling, "Do you want everything you do in the workshop to be fractionally harder and more frustrating? Well get rid of all those dull old 'designed for the job' tools and buy our unidentifiable homonculus of three of them"

@dimitar4y 3 года назад

wordsmith!

@noworldable 3 года назад

Its so strange it makes me wonder if this is for some highly specialized application with the soft metal jaws and all.

@lukasdon0007 3 года назад

I think you mean chimera instead of homunculus?

@modergav 3 года назад

That is a funny joke

@JDLarge 3 года назад

A shop teacher back in the day had one of these (very similar) set up in my high-school metal fab shop! 79! Hadn’t ever seen one before OR since. There wasn’t much he couldn’t do using that, as it was HIS preferred vise. Awesome to see one again, and as usual you’ve done an outstanding job bringing her back to life, I especially like the brazing scars, they give it some more class😉! But now I’m kinda feeling a tad bit old-er... 🥺✌🏼

@madmodder123 2 года назад

What was his main use for it?

@iamgerg 3 года назад

Me: Watches Adam Savage on Tapping. Me: Watches HTR using a drill with a smaller diameter tap. Me: Noooooooooooo! HTR tap: *crack*

@deltafactory 3 года назад

After watching Adam's video (just prior to this one) I knew exactly what was going to happen once the scary music started...

@Sjackson2369 3 года назад

Watched that one as well. As someone who can break the big taps fairly regularly, small taps make me nervous

@martylawson1638 3 года назад

@@Sjackson2369 Best way I've found to break taps is to flex and bend them. The best way I've found to NOT break taps is insure they're never flexed or bent. I.e. use a "tap press" or if you're in a mill, chuck up a dead-center and place it in the centering divot of the tapping tool. I also prefer to do 50% depth threads in steel instead of 75% threads. Way less tapping torque and holds well enough. (oh, and use TapMagic. cuts the torque in half)

@Sjackson2369 3 года назад

Marty lawson don’t dick up the threads and don’t use a tap - best way to not break one lol

@allangibson8494 3 года назад

And that is when you buy a tap destroyer... (which is basically a deep hole plasma cutter).

@stevekreitler9349 3 года назад

A lady handed me a rust encrusted pair of scissors to sharpen, recently. I tracked down some Evaporust, soaked them overnight, and was able to return gleaming hella sharp scissors! I'm a convert!

@TomokosEnterprize 3 года назад

Worth every penny !

@marcelo90z 3 года назад

Hey, mr HandToolRescue, I just want to say that we at home love your content. I watch your content with my mom because we love repairing videos, we love when stuff gets fixed or gain new life, but we particularly love your videos because of your humor. It is special because my mom doesn't like to watch much english content because the doesn't know the language (we are non-native speakers of english, we are from Brazil), but you are one of the few channels in english that she actually likes to watch. Simultaneous translation kind of became part of the routine for translating your jokes to portuguese... hahahaha Love your videos. Your humor makes you special.

@drewstotts7087 3 года назад

What an incredibly tedious tool to have to use. Shocking that the company that made them went out of business Looks excellent restored though! GGs

@Gnarledreaper 3 года назад

It was a time before powered drills.

@pressb 2 года назад

Pretty sure you are supposed to lock the wood in place with the vice and then drill. If you were drilling a lot of the same hole e.g. in wooden droppers for wire stock fencing, this thing would be a massive boon over just a hand crank drill.

@frank-t6857 3 года назад

I thought "Don't knock you forhead on the blasting cabinet" and seconds later it bounced even harder 🤣

@GraduatedIn 3 года назад

It was funnier after I read this and checked back on the video lol

@heitordutramartucci7938 3 года назад

Great intro. Looking forward to see more of your work!!

@jasoncanterbury6899 3 года назад

you have kept me up numerous hours. but you also have help me sleep numerous hours. thank you. please keep doing this

@Rooster1172T 3 года назад

That is a very interesting tool? I completely thought the drill portion would have advanced by itself while drilling but upon realising that I did remember the spindle is held in place with washers and no screw mechanism. To crank the vice then drill then crank the vice and vice versa is a bit of a pain, but it's definately an incredible piece non the less so great job!

@singJJBplay 3 года назад

REMIX!!! THROW YA HANDTOOLS IN THE AIR! WAVE 'EM ROUND LIKE YA JUST DON'T CARE!!!

@metalbob3335 3 года назад

Hit the deck

@MrLeatherman23 3 года назад

Promenade and back to your corners.

@nathanstevens6351 3 года назад

Seven injured in a hand tool dance party gone wrong today...

@feelspazman5860 3 года назад

Not a big tool/handyman type of guy, but these videos are always incredibly interesting.

@HandToolRescue 3 года назад

Thanks!

@windyhillfoundry5940 3 года назад

Gives adjustable feed rate a whole new meaning. Love that finish Eric👌

@djguy314 3 года назад

Strange configuration, not sure what you would need this for. Beautiful work as always my friend.

@prestongoss6824 3 года назад

That is such a weird vise...thing. The drill part didn't look tedious at all... Thanks for another great video. I always enjoy your intros!

@patjohnson3100 3 года назад

Thank you for saving this rare oddball tool. I've never seen one. The brazing and straightening of the beam would have stopped me. The job looks really good.

@jobuda10 3 года назад

Never forget 9-11-2001 I have so much stuff in my garage because I want to be like you. Great videos.

@damienbusnarda6184 3 года назад

I rly like what u do . Keep it like this . No talking . Machine and other sound . Awsome

@broadstken 3 года назад

Well, that is definitely one of those, and definitely the first one of them I've seen. I can't help thinking "but, why?" And now I want one for no other reason than the sheer wtf value

@moisesferreira1812 3 года назад

Bela restauração. Ferramenta incrível. Parabéns.

@shamrock1961 3 года назад

A++ video as always. Enjoy your projects a great deal 👍. Thanks for your dedication to restoration!

@TheFurriestOne 3 года назад

Ah, earthquake-edition intro, very fitting for 2020! That is probably the strangest vintage tool I've seen yet!

@jeff1176 3 года назад

I guess if you want to drill a straight hole horizontally this is the vise for you. Seems like quite a bit of work though. Very nice restoration, keep up the great work Eric.

@thomasklugh4345 3 года назад

I just love it when I see it all coming together... Really nice job... again!

@Dr_V 3 года назад

My mechanics: "Strip the original paint, smooth out the cast, apply filler, primer, paint and a clear coat" Hand Tool Rescue: "The original finish was japanning and I have some of that lying around the shop..." Two very different and fascinating styles of restoration, I love both channels and learned a lot from the videos.

@BigGrabowski 3 года назад

Why, this is a fabulous gewgaw, a wonderful whatchamacallit, dare I say a spectacular oojamaflip. I bet the original owner had to pay three easy payments of $9.99 for it.

@MrLeatherman23 3 года назад

Nope... half down and half a month for 9 years.

@1978garfield 3 года назад

I'm shocked it didn't have the Craftsman brand on it. Sears...your home for solutions to problems that may not in fact exist.

@silviodeon6476 3 года назад

Top muito bom incrível cada vez melhor!

@WrenB111 3 года назад

Came out great as usual. I like the smaller projects you do. Fun to watch

@nini_stols 3 года назад

These intros keep getting better and better

@CanadairCL44 3 года назад

I have never seen a vice like that before, and you made a great job of the restoration as usual. Some suggestions, you could really benefit from a hand press and or a fly press, Perhaps you could find one of each to restore? Also, using hand taps in a drill or machine is always going to end in disaster. Use machine taps if you are going to tap holes using a power tool - they don't break, especially if you use some lubricant. Always tap at a low speed.

@thegougler 3 года назад

I love how the microphone only picked up the annoying frequencies from the die grinder.

@HandToolRescue 3 года назад

Right?! Was so happy to hear that.

@yorkshirejoinery2869 3 года назад

Radical new start! Very street, the young ones will love it!

@funkyspacecow 3 года назад

I love the dramatic build up in the music when the tap broke... and then the fake out with the other tap!

@thomasthompson6799 3 года назад

Unusual old vise that must have had a very specific job. Nice job restoring it but I think I would have cleaned up the jaws and left them as original. I like the Japanning.

@youtubeuser5402 3 года назад

I absolutely loved the intro😂😂

@donaldmclean1645 3 года назад

Love your vids. Always great work and I find some of them educational.

@ricosuave1647 3 года назад

Bro I’ve been itching for you to put out a new vid!!! Thank you you made my day with this one!!

@chrisparola3949 3 года назад

I laugh uncontrollably every time I see the sand blasting cabinet and know that your head bouncing off the glass is coming...

@horstszibulski19 3 года назад

Best scene was the glass changed to cling film some videos back... :-D

@---Michael--- 3 года назад

I never even got to that joke because the videos are so relaxing that I'm asleep after 5 Minutes 😂

@westa1979 3 года назад

HTR: These jaws are weird Jaws: You're weird

@mattymmmm2362 3 года назад

So I’m seeing a whole bunch of machines we have not seen before. New workshop tour video!

@ingmarfris8175 3 года назад

Very interesting restoration. Great work as usual!

@Pest789 3 года назад

Has a mill. Still drills things he literally just had set up on the mill by hand.

@brucepierson9941 3 года назад

And then uses a sanding belt to trim them to length. 🤣

@magicoddeffect 3 года назад

I kept yelling this at my screen. Plus the fact that he keeps tapping holes with a drill...that terrifies me. Doing it by hand not only makes for better video but it's way less likely to snap taps

@gabrielbarbosa6543 Год назад

Essa eu nunca tinha visto muito top👍👍👍

@TDIMAXDIESEL 3 года назад

Very nice restoration! Thanks for sharing 😊🇨🇦

@luiscardozo1419 3 года назад

Beautiful tool!!!! Amazing restoration

@djfaber 3 года назад

Have you considered using longer cotter pins?

@HandToolRescue 3 года назад

I'm trying to find longer ones actually.

@clubsoda85cook55 3 года назад

Fastenal has them up to 6” and up to 1/2 diameter.

@scruffy6151 3 года назад

🤣🤣🤣

@00dmb5 3 года назад

@@clubsoda85cook55 :O

@stoutlager6325 3 года назад

@@clubsoda85cook55 Nice.

@mikejose8966 3 года назад

I swear that vat of Evaporust STILL gets larger every episode. You’re gonna end up with a swimming pool of the stuff.

@jessefoulk 3 года назад

I noticed that on this one. It was filled more than I remember.

@ronthacker211 3 года назад

Good job. Nice to see tools that I've never seen before.

@jerryjohnsonii4181 3 года назад

Fantastic restoration on this Vise Drill Anvil !!!!!!!!!!!!!!!!

@ShinoPuppy 3 года назад

I'm starting to think that his true goal is to scare off as many people as possible by incrementally making the intro more and more trashy with every new post. …pun intended.

@HandToolRescue 3 года назад

Of course! If I wanted a more general appeal I wouldn't be making 30min videos with no talking!

@frank-t6857 3 года назад

@@HandToolRescue I think you hands express a lot more sense than most most people's mouth here on YT

@reigninoel 3 года назад

This one looks like it was filmed with a camera placed on a flimsy stool or something while someone is breaking up the concrete floor around it with a jackhammer.

@Scouts_Honor 3 года назад

Can't wait for the techno remix ft. Nelly. That jam is gonna be hot!

@scruffy6151 3 года назад

@@HandToolRescue what you talk well i will be dammed lol. Going to take more than a little shaking before i leave this channel lol. Have a great day.

@williamreininger7546 3 года назад

Not going to lie, I’d have laughed if that second tap broke.

@70tdc12s 3 года назад

You have the best restoration videos.

@donjohnson3701 3 года назад

Thanks for a great video! I have two of these that I bought several years ago but they do not have the support for the drill press attachment. I didn’t truly understand the function of the vise until I saw your video. Now that I know how it is supposed to to work it will be my next project.

@HandlebarWorkshops 3 года назад

It's funny. I watched this video immediately after watching Adam Savage talk about how you can never use too much tapping fluid and how much of a PITA a broken tap is to remove.

@chriscromar9013 3 года назад

Saw the same episode and it was the first thing that came to mind too.

@Gravalpea 3 года назад

Same

@Lucien86 3 года назад

But the real fun is having your own tap break the exact same way.. Then remembering the Adam Savage video..

@DUxMORTEM 3 года назад

So question, how often, if even at all, do you change that bucket of evapo-rust?

@MarekLewandowski_EE 2 года назад

Every time the corpses stop dissolving...

@88ElevenShop 3 года назад

That's some great content and production value. That kit looks great.

@TheRealBigSwede 3 года назад

cool to see that you are doing the Japanning!!

@oldenslo4141 3 года назад

May I ask a question? Did you finally take down the swag lamp in your living room? Dang, it! I wondered where you got that chain!

@HandToolRescue 3 года назад

Hahaha. I should keep a stock of small brass chain for things like this.

@davidregis592 3 года назад

@@HandToolRescue Sash chain also seems like it'd be appropriate

@zumbazumba1 3 года назад

@@HandToolRescue what abrasive do you use in your sandblaster and on how much pressure?

@asvarien 3 года назад

I'm more confused than a homeless guy under house arrest.

@jbuffalo65jb 3 года назад

I've got one just like this. So far all I've done is derust it. It's missing the drill base but otherwise in decent/well used shape. Great job on the restoration.

@861LJ 3 года назад

Wait for it...wait for it....yes! Quick face plant at the sand blaster! Night made!👍🏻😆 Versatile little vice..even has an anvil on it! Nice resto! Good job!!

@TysyTube 3 года назад

😘😘😘😘😘😘😘😘😘😘

@jasonsummit1885 3 года назад

Wasn't expecting the die grinder to sound like a screaming woman!😂

@MercuryWagons 3 года назад

I seriously can't wait to see your next videos! I have watched every video on this channel and I am always amazed by the work you do! Thanks for preserving history.

@HandToolRescue 3 года назад

Thank you so much 😀

@MercuryWagons 3 года назад

@@HandToolRescue you are welcome. Seriously it's my privilege to watch what you do! Keep it up:) I'm always a fan🇺🇲♥️🇺🇲

@TacosTasteLikeBlue 3 года назад

THAT REMIX KILLED ME, thank you HTR. I needed that.

@katar0t0 3 года назад

Taps in a drill, I see you also like to live dangerously :)

@fungunfanatic 3 года назад

It's a Boy!!

@westa1979 3 года назад

As a Californian I find this very triggering.

@Lyric.S- 3 года назад

@@westa1979 california boooiiiiiii

@agapiosagapiou 3 года назад

Excellent job! Nice tool!

@brianbrown1955 2 года назад

Your restorations are masterful, great work!

@123Shel12 Год назад

The cheap chains were the only replacement items I didn’t like. Otherwise, A+ for the restoration.

@RinoaL 3 года назад

ive never heard of this type of tool lol.

@ThePostApocalypticInventor 3 года назад

Hello there! Seems like this is the place to be.

@ThePostApocalypticInventor 3 года назад

@ItsYaBoi ErrSkinnYP3n15 I was simply amazed to find both AvE and Rinoa in the same comment section. Channels I have been in contact with for a number of years.

@HandToolRescue 3 года назад

I am the missing link! Haha

@HandToolRescue 3 года назад

It needs to be more things.

@ThePostApocalypticInventor 3 года назад

@@HandToolRescue The missing link! Yes that's it. You obviously are completing some kind of very strange mosaic right here. (mumbling:) Riddles in the dark...