not sure if drennan would read, but here are some ideas or improvements to implement with crystall wagglers set to eliminate following issues: 1. float weight simply put into float indentation with a small glass piece. sometime, not to often, float weight jumps off of main float body, which results in crystall body lost during cast. to fix this, instead of simple hole in float butt, much better is to have carvings, where weight can be screwed in. this, then mean weight itself need reworked to allow this. 2. float weight has a glass spigot, and when accopmained with float adapter, there is a certain mass imbalance, i.e, the weight is too far from the line, which impairs the casting. not by much, but float waggles more. to fix this, weight can be made more bulbous and spigot removed, instead small swivel can ve buried in weight itself, so that it can be attached to line, or pellet waggler style adapter. with such change you can feel that weight is all at tge bottom of float and it fly as a dart much more freely. 3. if implemented 2 points mentioned above, it can be then good to sell the set of weights standalone with more fractional weights. say, that to fully cock the float witj capacity of 3g, 1.5BB of additional shot needed. instead, of adding bulk of shots, fractional weight of 3.3 ir 3.5 gramms can be created, so that 3g weight can be screwed off the carved hole, and bigger weight added. thanks much.
