VOLspeed Tuning for Bosch Smart System (En) 

We have some customers who use the module together with a Connect module. It depends very much on the actual bike whether the space is sufficient. All bike manufacturers use their own covers. Therefore, the available space varies greatly.

If 5 connectors are connected, then the bike is probably equipped with permanently installed lighting -> display, speed sensor, battery, front light, rear light. The tuning will of course still work.

you need to look at the cooments reply from volspeed to K3vo93

Our VOLspeed for the Smart System (P/N 1318) is unfortunately not compatible with the latest software version 11.9.3 for LED-Remote, System Controller or Purion 200. Since 3.5.2024 there is a new tuning, the VOLspeed for the Smart System V2 (P/N 1350). Information on the new tuning module can be found under the following link: www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F1350 This module has the same functionality as its predecessor, but is compatible with the latest Bosch software. Old modules (P/N1318) will also have the option of a software update from 3 May 2024. Unfortunately, the update is not free of charge. Details can be found under the following link: www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F9011 Please note that you can only order the update directly from us if your delivery address is in the European Union. For all other countries, please contact the dealer from whom you purchased the product regarding the possibility of an update or exchange.

need to look at the comments a couple down

@PEPQC they helpen me quite good actually, they made me look up my motor number and turns out I just ordered the wrong version. Quite quick replies from them aswell in the Netherlands, can't talk on other countries though but for me it was quick and helpful!

@@davidbaz5006 yeah I just ordered V1 and I needed V2, my bad lmao

@PEPQC no problem my guy, sorry for the late responce in the first place

Our VOLspeed for the Smart System (P/N 1318) is unfortunately not compatible with the latest software version 11.9.3 for LED-Remote, System Controller or Purion 200. Since 3.5.2024 there is a new tuning, the VOLspeed for the Smart System V2 (P/N 1350). Information on the new tuning module can be found under the following link: www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F1350 This module has the same functionality as its predecessor, but is compatible with the latest Bosch software. Old modules (P/N1318) will also have the option of a software update from 3 May 2024. Unfortunately, the update is not free of charge. Details can be found under the following link: www.volspeed.de/epages/83313866.sf/en_GB/?ViewObjectPath=%2FShops%2F83313866%2FProducts%2F9011 Please note that you can only order the update directly from us if your delivery address is in the European Union. For all other countries, please contact the dealer from whom you purchased the product regarding the possibility of an update or exchange.

When the bike is switched on, tuning is initially always deactivated. If you then enter the sequence - + - + it is activated. You do not necessarily need a display for this. You can also change the limit without a display. For example, to increase it by 5kph, simply press - + - + + + + + + +.

brilliant thanks for the reply

@@volspeedebiketuning4391Does the limit show within the flow app when using with led remote?

I'm buying this but don't have the display, so wondering if I can use the eflow app?

​@@volspeedebiketuning4391Can you see anything in the flow app when it is on?

I have the latest Bosch firmware on my Performance Line CX smart system: 9.13.0, volspeed is fine on it , however once you have fitted the volspeed chip never update the bike again or it will detect the volspeed

@@Lawson7086 Simplemente No actualizar nunca, verdad? Y puedo utilizar la app Flow para bloquear y desbloquear la ebike?

@@rafahe360 i have been told you can use the Flo app with volspeed but DONT UPDATE, i personally have not used the Flo app with my Volspeed i am to worried, but i may try it...

Okay, but I can use the flow app while I use the unlock module safety if I can't update the firmware? And if I can't, when the module off, I can use the app? Thanks bro!

What happens if you had already updated the firmware is there anything that can still be done to fix it