Volvo 2.4D D5 V70 Swirl valve link . Drallklappe Wirbelklappe. Wervelklep koppelstang

Подписаться 83

Просмотров 20 тыс.

50% 1

On a Volvo D5 a display message saying MOTOR MANAGEMENT is often caused by the a failure of the swirl valve, probable by a detached link.
In this video I show you how to solve this problem and to avoid it will happen again.
Enjoy it , Rene

Опубликовано:

20 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@renewesterhof4968 3 дня назад

Hello Friedrich, I sold the V70 with 585.000km on the tacho and it worked still absolutely fine. Rgds Rene

@Christerart 3 года назад

Rene - you are an amazingly kind guy! Thank you!

@renewesterhof4968 3 года назад

Update: january 2021, at 530.000 km the modification is still working perfectly.

@bramboer727 Год назад

René, have just adopted & executed your method, was a bit of a struggle in those tight spaces, bit it’s done. Fingers crossed that it’ll hold. Thanks so far anyway.

@Mr_Ivar. Год назад

How's about EGR valve? That still can cause problem,by clogging up swirl flaps !

@ukgardener973 Год назад

That is amazing. Thanks you so much for sharing your great idea. I will try it and see what al happens. I will order the RC set. Thanks.

@bernhardbaron9323 Месяц назад

The use of flathead screws make me a bit nauteous. But other than that pretty awesome.

@Kevin-cy9cv Год назад

Good idea, a very common problem it would seem, Thanks

@gasgas2689 3 года назад

Well done that is an excellent job. I have just found out that my link arm has fallen off meaning smoke from the exhaust. I need to do this job. My V70 has done 107,000 miles - 172,200 km.

@PedjoGT Год назад

On my fall off but wihout smoke

@ahmtkmts8019 Год назад

Thank you for the advice, İ did the same 👍🏻👍🏻

@sagotremi6336 3 года назад

Hello, Thank you for this great, economical tip. On the other hand your engine clearly makes a noise of out of service hydraulic valve lifters. You should replace them quickly, as you may end up with one or more broken tappet housing (s) and the dead cylinder head. Remi

@renewesterhof4968 3 года назад

Hello Remi, That is sharp noticed and absolutely right . Thanks for your reply. Rgds, Rene

@renewesterhof4968 3 года назад

Okay, good luck. I hope the explenation on my video will help.

@maverick106 2 года назад

The link is at 4,29 for 2 right now thats 2,15 for one....including screws and nuts for 20cents...thats approximately 997 Euros and 65 Cents Cheaper than replacing the flaps...i think i'll try this first! And this seems to be by far the best solution, no building custom rods or anything like that, awesome!

@renewesterhof4968 2 года назад

Hej Maverick , Good luck with this modification. Worked for me and several others. Thx for your reply. Rgds, Rene

@maverick106 2 года назад

@@renewesterhof4968 M3x20 doesn't fit in the gap on the later engines, i used M3x16 with a flat countersunk head on the engine side.Also you can't unbolt the link arm from the motor on my engine. But cutting and drilling with the arm installed works just fine, you just need a very long drill bit to get to it.

@renewesterhof4968 2 года назад

@@maverick106 Hej Maverick, Very glad you figured it out how to make it work on your Volvo. Thanks for your reply. Rgds, Rene

@RW-ds4dj Год назад

Nice,,, I like "handy-men",,, but you should really have a serious talk with your rooster 😊

@renewesterhof4968 Год назад

🤣🤣🤣 He didn t make it till Christmas🍗🍗

@krustynator5027 3 месяца назад

Hello, do you have a link to buy this article please ?

@Meik013 3 года назад

Wo kann ich den Hebel so kaufen?

@Christerart 3 года назад

HI Rene. I love the idea of this improvement to my XC70 - is there a place I can buy it? The link at the end of this page gets me nowhere.:(

@renewesterhof4968 3 года назад

Hello Christerart, on the Website : www.conrad.de or www.conrad.nl the draglinks for Reely RC can be ordered for €4,50/set.

@Christerart 3 года назад

@@renewesterhof4968 HI Rene - is it possible you can give me a direct link? I don't know what to search for in either Dutch or German and after trying 5 pages searching for Reely RC and not finding the links I am discouraged.

@renewesterhof4968 3 года назад

@@Christerart Hi, When you are on the website www.conrad.nl fill in the item number 538056 in the search box.. I cannot attach a picture of the site unfortunately. Otherwise send me an dirsct email: reneoke@home.nl Rgds, Rene

@Christerart 3 года назад

@@renewesterhof4968 Thank you so much Rene. That worked - although the price now is now €4.99..:). Many thanks!!!

@Christerart 3 года назад

@@renewesterhof4968 Didn't work: This Brexit stupidity: Die Rechnungsadresse muss im Europäischen Wirtschaftsraum sein.

@izyfication Год назад

Hi , i have the same problem but i can’t find the link for the item you use to fix it could you help me please ? Thank you

@renewesterhof4968 Год назад

Hello Jerome, I bought a set drag links for a remote controlled car on www.conrad.nl or www.conrad.de This part is a M3 spanner with right hand side treath on one side ans left hand treath on the other side . It is about 8 centimeters long. This is often used as a rear suspension part for a remote controlled car. I hope you will find it on the sie I mentioned or an other site for remote controlled car parts. Good luck. Rgds, Rene

@renewesterhof4968 3 месяца назад

I bought them on a website www.conrad.nl . They are steering rods for a remote controlled car by the brand REELY. Cost about € 6,00.