Volvo XC40 (2019-2024): How To Remove Rear Trim Panels In The XC40?

Подписаться 49 тыс.

Просмотров 6 тыс.

50% 1

In this video, we will show how to remove and install rear trim panels in 2019, 2020, 2021, 2022, 2023, and 2024 Volvo XC40.
RECOMMENDED TOOLS:
1. SWIVEL HEAD RATCHET - GEARWRENCH 2 Pc. 1/4" & 3/8" Drive 72 Tooth Dual Material Roto Ratchet Set - amzn.to/3kwhHdS.
2. SOCKET SET, RATCHET - GEARWRENCH 57 Pc. 3/8" Drive 6 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - amzn.to/41wE6Z3.
3. EXTRA LONG NEEDLE-NOSE PLIERS - KNIPEX Tools Extra Long Needle Nose Pliers, Straight Jaws - amzn.to/3Zzt3gy.
4. TRIM REMOVAL TOOL - 4pcs Auto Door Clip Panel Trim Removal Tool Kit - amzn.to/41nYhsk.
5. 3/8" RATCHET SET + EXTENSION - Wera Zyklop Speed 8100 SB6 - amzn.to/47xfIcu.
6. 3/8" TORQUE WRENCH - VANPO 3/8" Digital Torque Wrench (2.2-44.3 ft-lbs./3-60Nm) - amzn.to/46LkNfX.
Volvo XC40 (2019-2024): Fitcamx Front And Rear Dashcams Installation. Avoid Airbags Completely! - • Volvo XC40 (2019-2024)... .
Volvo XC40 Playlist: • Volvo XC40 (2019 - 202... .
Camera Used To Record This Video: Panasonic HC-WXF1 4K Cinema-like Camcorder, 24x Leica Dicomar Lens, 1/2.5" Bsi Sensor, Three O.I.S. Stabilizer Systems - amzn.to/4cn55KY.
Thank you for watching! Please support us by liking the video and subscribing to the channel!
You can also buy us a coffee! :) - www.paypal.com....
DISCLAIMER: All information displayed in the video is for entertainment and informational purposes only. You can't treat it as professional advice. Should you decide to act upon any information in this video, you do so at your own risk. When you click on links to various merchants on this site and make a purchase, this can result in this site earning a small commission. Affiliate programs and affiliations include, but are not limited to, the Amazon Associates Program.
#MorozovAutomotive #Volvo #XC40 #VolvoXC40

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@MorozovAutomotive 10 месяцев назад

RECOMMENDED TOOLS: 1. SWIVEL HEAD RATCHET - GEARWRENCH 2 Pc. 1/4" & 3/8" Drive 72 Tooth Dual Material Roto Ratchet Set - amzn.to/3kwhHdS. 2. SOCKET SET, RATCHET - GEARWRENCH 57 Pc. 3/8" Drive 6 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - amzn.to/41wE6Z3. 3. EXTRA LONG NEEDLE-NOSE PLIERS - KNIPEX Tools Extra Long Needle Nose Pliers, Straight Jaws - amzn.to/3Zzt3gy. 4. TRIM REMOVAL TOOL - 4pcs Auto Door Clip Panel Trim Removal Tool Kit - amzn.to/41nYhsk. 5. 3/8" RATCHET SET + EXTENSION - Wera Zyklop Speed 8100 SB6 - amzn.to/47xfIcu. 6. 3/8" TORQUE WRENCH - VANPO 3/8" Digital Torque Wrench (2.2-44.3 ft-lbs./3-60Nm) - amzn.to/46LkNfX.

@ashryalls1 Месяц назад

@MorozovAutomotive I needed to replace a boot strut (electric trunk/tailgate lifter) which had become faulty (the common loud popping sound these develop) and this video was incredibly useful so thanks for making it. For those needing to do the same, you only need to remove 4 of the panels - The one where the belt is which slides forward - The one with the belt guide where you remove the bolt and then pop upwards. - The long one down the side of the door - The one you pull out from the bottom then slide down with the 3 tabs at the top The connector for the cable is in the area of the speaker (though I don't have this as no upgraded sound system option). The connector is pushed in to the bodywork on 2 plastic pins, carefully pull this away so the cable hangs free, press in the retaining tab on the connector and disconnect. From the outside pop out the rubber seal where the cable goes into the body. There is a cable guide you will need to remove inside the hole through the body, this clips onto the frame of the inner hole with a metal spring, just slide it toward the centre of the hole. From there you can pull the cable out, get someone to hold/prop the boot lid open as one strut won't be enough to hold it (a big piece of wood works well). Then remove the existing strut by popping a screwdriver under the retaining clip and twisting it off the ball joints. Assembly is the reverse of disassembly. I replaced with a like for like genuine Volvo part (albeit a used one) and it just worked; no fault codes or issues with opening. I can't however speak for the third party options which are available though these may be the same.