Let's begin assembling together!
00:00 Unboxing
01:53 The assembler may deviate from the procedure specified in the instructions at his own
discretion and at his own responsibility)
03:21 Step 1 Gear assembly step 1
05:30 Step 2 Gear assembly step 2
07:46 Step 3 Assembling the gearbox frame
10:38 Check the rotation of the gears, they should rotate freely
10:58 Step 4 Gear assembly step 4
13:17 Step 5 Gear assembly step 5
15:47 Step 6 Flywheel Assembly
18:11 Step 7 Installing the gearbox and gears step 4, 5
20:18 Check the rotation of the gears, they should rotate freely
20:52 Step 8 Assembling the Spring Cassette
24:00 Attention! Insert the spring exactly as shown in the figure!
27:35 Check the rotation of the winding key, it should turn freely
27:40 Step 9 Installing the spring cassette, ratchet mechanism
29:08 Check the rotation of the winding key, it should turn freely
29:16 Attention! Bend the ends of the rays 15-20` in the direction shown in the picture!
ATTENTION! Install the ratchet parts exactly as in Figure, pay attention to the direction of
the rays! Also, their tips should be bent inward, towards each other!
Holding the ratchet gear in your hand, make sure that the key rotates clockwise and locks
counterclockwise.
29:44 Step 10 Assembling the housing, installing the flywheel
34:06 Check the operation of the mechanism, the gears should rotate freely
35:19 Step 11 Installing the back cover
41:42 Check the rotation of the gears, they should rotate freely
42:14 Step 12 Installing the side trims
46:46 Check the operation of the mechanism, the gears should rotate freely
46:52 Step 13 Assembling the drive wheels
01:07:39 Step 14 Installing the Right Drive Wheel Axle
Step 15 Installing the Left Drive Wheel Axle
01:09:14 Step 16 Installing the Left Drive Wheel
01:09:59 Step 17 Installing the Right Drive Wheel
01:11:21 Check the operation of the mechanism, the wheels should rotate freely
01:12:00 Step 18 Assembling the rear pair of wheels
01:26:56 Step 19 Installing the Rear Wheels
01:28:15 Check the rotation of the wheels, they should rotate freely
01:29:53 Step 20 Assembling the grain loader
Step 21 Installing the Grain Loader
Check the operation of the stopper - when the grain loader is raised, the combine
should stand, and when the grain loader is lowered, it should move
01:38:21 Step 22 Assembling the cabin, installing headlights
01:43:35 Step 23 Assembling the cabin and installing mirrors
01:46:20 Step 24 Assembling the cabin and installing the floor
01:50:19 Step 25 Installing the cab and roof
01:55:50 Step 26 Assembling the header rotor
02:13:21 Step 27 Assembling the header
02:22:39 Step 28 Installing the header
02:25:23 Check the operation of the mechanism - when the stopper is raised, the combine
should stand, when the stopper is lowered, it should move, the header rotor should
rotate
Collect the Best!
11 июл 2024
