Voron Mod Showcase: Trident Nevermore 

You want to stay away as far as possible from any heat sources with the Nevermore because heat makes the carbon depleat a lot faster. On a V2 its under the bed because there aren't really any better spots but on a Trident you can place it so much further away, you should use that to maximize the efficiency. If you want to move the air from the bed to circulate it inside of the chamber, using fans would be better than using the Nevermore. Quote: "At the same time, with increasing heat, the VOCs get more heat energy and desorb from the carbon" as well as: "Anything above 50C is generally not good for bad stuff to stay attached to the carbon. And while the micro has been shown to work even at 80C intake air under a heated bed, it most definitely decreases the time between carbon changes a lot!"

Loads of videos of people fumbling with nevermore install videos lol, Idk why they don’t edit the video to show the procedure instead of all their errors and put text over it. Thanks for the *actual* video guide! You’re awesome.

I have been looking for a place to put the filter, thanks

Heads up. The LDO kit includes a wire for the Filter Fan but it is not long enough to run down the Z chain. You will have to extend it.

Cool beans

I wish I had 3 hands as you seem to. I didn't realize nevermore was so small. I've got nevermore parts on the way for my v0 and v2. Probably pretty similar I would imagine.

When soldering the wires to the pcb, is the correct configuration to have all 3 reds on one side, and all 3 blacks on the other?

Which stl do we use for the cartridge for mounting under the bed?

if that LDO PCB were a few mm longer in each direction, one could solder JSTs to it.

I just wonder how the magnets are able to hold 300gr of carbon, mine certainly won't.. thinking about printing an ugly but functional support beneath the cartridge.. i'm pretty confident it will fall at some point.

Mounting directly under the bed does not seem like a good idea at all. Another comment already mentioned depleting carbon efficiency at increasing temps, plus a lot of cheap blower fans don’t like high temps.