VW 2.0l TDI HPFP CP3 high pressure fuel pump upgrade 

Thanks for your comments and likes. I have done 2 of my cars now all my metal shaving worries are gone.

This Video helped me finish this project. Just had to get the lines right and your video showed it exactly.

Going to be doing this next month! Thanks for the video

Just saw metal shavings on my 2nd cp4 pump Time to warranty it and switch to cp3!

Be good to hear it running

Awsome and very informative! I got much wiser after this video! Thank you so much😊keep up the good work! added you as sub

I just ordered the kit for my cjaa. I think mine was deleted previously and had the cjaa.havent had any issues with my cp4 yet. 158k miles.

nice thanks for the post

Matt Whitbread’s kit pump with the reman pump runs fine without a tune. The metering valve is a genuine Bosch ending in part number 400643 and is the only one of like 6 they make that will work without tuning the car. I’ve got 500 miles on my setup so far. 45mpgs average with a personal best close to 50 on highway. I’d say it’s about 2-3mpg bump.

Ram had the CP4 in the 2500/3500 RAM HD with the 6.7... they ran them for 2 years...I think at this point they have all been changed over to a CP3

To avoid pulling the studs you should be using 15-18 lbft of torque. That shouldn't pull the studs out, they're threaded into plate and then tack welded in.

@Mike Fn Garage by any chance do you know the sizes of high pressure fuel line threaded adapter, inner and outer? Let say one has to replace CP3 with another CP3 for various reasons where can i get just that "slip"? I dont want to change the whole high pressure fiting of the old pump to the new one. To this point I dont know how recuperate that little adapter thread. Any suggestions is more than welcomed, and thank you in advance for your time and your help! I'm all ears and eyes to your response

CP3 vs CP4 comparison video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uUu3XmOAWnI.html

Do you know of anywhere that will sell a prebent HPFP line for the CP3 converstion?

On the Bmw CP3 R70 pump Cascade German states the auxiliary pump must be left on it also doesn't have a wiring connector change needed. Is this model from Xman different? Thanks a ton!

I know this video is a couple years old but for anyone wanting to do this fisher motor works sells a kit now for this.

I have a 2009 jetta CBEA. Bought it with 88k, currently at 288k. Never had any pump issues. Should I be worried? I plan on swapping this motor into jeep in a few years.

How did you get the bolt off of the pump in order to get the gear off?

I think I got lucky. Maybe prev owner added the upgrade kit to it. I'm at 158k. Granted we run b20 here in MN.

On a non deleted (egr/dpf) do you need to delete it after install?

Do you have to delete dpf/egr after the swap?

It's easy for the front end. Question is spend the money on a 250k miles tdi

13:20 TDI lizard has entered the chat

I was wanting a CP3 myself but after watching all this work I’m overwhelmed! I’m a DIY’r but this is more advanced then my skills I believe. Also I just did the timing belt on my 11 vw Jetta 2.0 TDI cjaa and didn’t cap the fuel lines off and air got to my system. Worried about the hpfp after I tried to turn it over like 15 times and no start. I primed it with xtool but it only primes it in 2 second intervals. Did it about 50 times between trying to start but going to try and use buddies obd11 to do it for the several 30 second intervals. Any suggestions? I love the video and idea I just don’t have the skills like you do!

So this is the 2nd cp3 you put in? What a bummer I can't believe your luck. I think the cp4 in the duramax is bigger than the one for the VW or at least mine looks larger.

I see you left the Pink clip on and then ripped the one wire and had to reattach the new clip... if you take the pink plastic off first they pull out with Ease... the pink peice is a lock.

I just bought a 2009 TDI with 106k miles got a dpf code.. so I'm going to out cans through it and upgrade the pump immediately. Any suggestions on companies that remanufacture them

Hi, ( 34:05 ) the FUEL PRESSURE REGULATOR ,maybe you can tell me the OEM number?? thanks

Hi. I have 2011 Amarok 2.0 tdi engine can fit the cp3 no it?

Just a heads up. The CBEA in the Audi is different from the VW CBEA. I don’t know why but there are some weird decisions made in engineering.

plase can you do a video for the oil pump to

My HPFP has just failed on my seat leon fr 2.0tdi 170bhp... how can I find out how far the iron filings have gone they've been found in the fuel filter housing, will they have travelled any further?

240000 miles on my cp4

We’re are you located I’d like for you to do it to our car!

42k miles and mine just went out on our 15 Q7, Audi is paying 100% with warranty or it would've been 7500.00 they told me today.

Hey guys! I just got my cp3 installed and I’m having issues with it. I got a P0088 code fuel rail pressure too high. Any tips to get it running right?

Do you know the number of this mprop?

Mike, need your help! My mechanic just installed a Whitbread CP3 on my CJAA TDI. My mechanic left in the auxiliary pump and my car is running like ass. He says that the pump needs to be in there. Please advise

So if the EGR has been replaced with a race pipe, does the fuel line need to be bent?

why did you delete the secondary pump?

One frame the engine was in the car, the next frame it is out...love the concept of this video but I think you tried to show 7 different jobs in one video while cutting out a lot of the actual work you did.

Hypothetically

I’m not the only one that feels that way about Scotty Kilmer I see lol. Dudes a joke….

That adaptor plate looked like a pretty poor product.

Stevenson tuning........hmmmm...... I don't have good feelings about Stevenson anymore. He is up there on the reservation thinking he can do whatever he wants. And he thinks he is far enough away from anyone to ever have to deal with or see a customer in person when he does not deliver for them. I came to him as a customer with a 2011 MK6 Jetta looking to do a delete for fuel economy and obviously DPF delete. He wrote a tune and I passed my state inspection but fuel economy is equal to but certainly not better than stock. To keep a long story short here, the very first few tunes he wrote me was giving me over 50 miles to the gallon City, high 50s Highway. That Tune however was giving me an overboost code, it took over 9 months and multiple versions of the tune for him to finally give up on improving fuel economy. Then instead of Stevens him himself like a man, sent one of his dingbat underlings to tell me that I was getting poor fuel economy because it was cold (winter). Really then why do we have a cold air intake on our TDIs? (Sure Sub-Zero temperatures are no good (but here in the Mid-Atlantic states in December at that time it wasn't colder than 40°)) If cold air is really that bad wouldn't we have a warm air intake instead of a cold air intake? And another thing that dingbat underling tried telling me was that I never got over 50 miles to the gallon, he said that's impossible.. I sent him pictures and screenshots of receipts showing that I have empirical data proving I got well over 50 MPG and that shows me filling up just north of Baltimore and then not filling up again until south of Atlanta Stevenson tuning called me a liar. So choose Stevenson tuning only if you're okay with just getting by and not expecting him to go the extra mile and figure out problems if you have any. Basically if he does a tune for you he's only going to give you the bare minimum and give up instead of taking the time to get it dialed in and figured out.