Тёмный

VW Beetle Window Scraper Replacement 

Jay Dub Customs
Подписаться 2,4 тыс.
Просмотров 50 тыс.
50% 1

In this video, I remove the old and install new inner and outer door window scrapers on a 1970 Volkswagen Beetle.
Recommended Tools and Supplies:
➡️ Plastic Trim Set amzn.to/39XKmQx (Amazon)
➡️ Sharpies amzn.to/3rXlbDS (Amazon)
➡️ White Lithium Grease amzn.to/3t67jZj (Amazon)
➡️ Glass Cleaner amzn.to/3uyOj66 (Amazon)
➡️ Never Dull amzn.to/3dMC3rY (Amazon)
➡️ Masking Tape amzn.to/3mvvjmh (Amazon)
➡️ Screwdrivers amzn.to/3c14LWG (Amazon)
➡️ Metric Sockets amzn.to/3wGjQ84 (Amazon)
➡️ 1/4 Inch Drive Ratchet amzn.to/3mvvA8N (Amazon)
➡️ Makita Drill amzn.to/3wDIuGh (Amazon)
My Video Equipment:
✅ Camera - Sony 4K HD Camcorder amzn.to/3BCozf1 (Amazon)
✅ Tripod - Sony Grip and Tripod amzn.to/3BCoPdZ (Amazon)
✅ Microphone - Sony Gun/Zoom Mic amzn.to/3v7m9Sd (Amazon)
✅ Carrying Case - Sony Soft Case amzn.to/3HvZshT (Amazon)
✅ BZE Cell Phone Selfie Stick amzn.to/3WkaRIH (Amazon)
✅ Tiffen UV Protection Lens for Camera amzn.to/4cW6adw (Amazon)
✅ SwitchPod Tripod amzn.to/4cYuU4E (Amazon)
✅ SwitchPod Ball Head Mount amzn.to/4bFtjzP (Amazon)
✅ SwitchPod Cell Phone Tripod Adapter amzn.to/4bFtjzP (Amazon)
✅ Video Editing Program - Davinci Resolve
Social Media:
💥 FaceBook: / jaydubcustoms
💥 Instagram: / jaydubcustoms
💥 Email: jaydubcustoms@gmail.com
Music Tracks from the RU-vid Audio Library:
🎵 Scratch the Itch - Quincas Moreira
🎵 Thor's Hammer - Ethan Meixsell
🎵 In the Shadows - Ethan Meixsell
🎵 Church of 8 Wheels - Otis McDonald
🎵 Robots A Cometh - Dan Lebowitz
🎵 Soft Knives - Sef Chol
🎵 Cover - Patrick Patrikios
🎵 Ice Cold - Audionautix
🎵 Pentagram - Audionautix
🎵 Skinny Leonard - Audionautix
📖 Disclaimer:
The content of this video is provided for educational and informational purposes only. This content is not intended to be a substitute for the professional advice of a certified automotive mechanic. Using this content does not create any kind of an agreement or joint venture between Jay Dub Customs or Kafer Works LLC and the viewer. Jay Dub Customs nor Kafer Works LLC does not offer any warranty, whether expressed or implied, as to the accuracy or applicability of the information, or fitment of the automotive parts used in this video to/on any vehicle and does not offer any guarantee of results. Jay Dub Customs nor Kafer Works LLC, or any sponsors of this video are not liable for any damages from personal injury, property damage or loss of any kind that results from the use or reliance on the information, automotive parts, tools and equipment used in this video. Viewers are using the content of this video solely at their own risk.

Авто/Мото

Опубликовано:

 

8 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 217   
@vistable6006
@vistable6006 3 года назад
You gotta keep doing these tech videos. They're seriously some of the most in depth ones I can find.
@JayDubCustoms
@JayDubCustoms 3 года назад
Appreciate it. I plan to stick with how-to type vids.
@garyburton1131
@garyburton1131 10 месяцев назад
Q+q koi q 12th++++q+q
@foxibuster
@foxibuster 2 года назад
Suggestion ; you mentioned adding the 3 clips from the old scraper to come up with a total of 7. If you have a really old OEM scraper like mine it had 7 clips so I decided to take out the new clips and use all the old 7 clips. I almost made a BIG ERROR as I THOUGHT I had to drill out the strip to remove or add clips to the new scraper. Just in time and by staring down the new scraper, I realized I just had to squeeze the clip together and I could remove it !!! Whew. I DID NOT need the drill. Hopefully this will help someone not make the error I almost did. I liked and used your video for my project above all others I reviewed. Thank you.
@Nomorechampagne
@Nomorechampagne 2 года назад
Excellent video and you make it easy to follow with nothing missed out. You’re a gentleman!
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Anthony. Hope it was helpful.
@nathanzamzow
@nathanzamzow 2 месяца назад
Thanks for the guide! Just got some doors that need scrapers replaced
@JayDubCustoms
@JayDubCustoms 2 месяца назад
Thank you.
@shadiads35
@shadiads35 3 года назад
Lots of experience in manoeuvring items out and back in, thank you for the details.
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Shadi. I've done a few of them. 😁
@campion05
@campion05 2 года назад
You show and tell very good. Easy for this 63 yr old newbie to see and understand. Please do more self Bug improvements when you can. Thank You from SC
@JayDubCustoms
@JayDubCustoms 2 года назад
@campion05 Thank you, hope this was helpful. Got a few more videos I'm working on.
@toddrand1545
@toddrand1545 2 года назад
Great video. well explained.Im from Canada and worked for a glass company for 18 years. If i may just add two more comments of help to your video when you put the door glass back inbetween the scrapers at the very top of the back chanel that would be closest to back wheel. at the very top of that channel give it a light spray of clear spray silicone to the bottom of channel just before it goes inside the door then you can apply heavy spray down channel to the very bottom ( the silicone will run down the channel ). until you see it just start to drip out. and then same on front channel makes it so much easier to roll up and down and give the gears on the regulater a good dose of lithium grease help keep it lubed. and at the end before the door panel apply a heavy piece of plastic back on the door. keeps any moisture that gets past the scrapers from letting moisture get to the cardboard door panel which can cause a musty smell inside car plus not warp the panel from getting wet and drying out over and over. Hope this helps all you people out
@JayDubCustoms
@JayDubCustoms 2 года назад
Hey Todd, thanks for the tips. I'll try the silicone. How's the bug scene in Canada? I'm a big Rush fan. 😁
@matthewullman9328
@matthewullman9328 Год назад
Thank you for for your video. I was able to change my window scrapers and felt with ease thanks to your video
@JayDubCustoms
@JayDubCustoms Год назад
Thanks Matthew, glad it helped.
@ritagilbert9321
@ritagilbert9321 3 года назад
Nice demo on the door panel /arm rest removal and the clips for the felt channel. ✅Seeing the arm rest and clips up close.
@JayDubCustoms
@JayDubCustoms 3 года назад
It's all about the details. 😁
@fotovox3086
@fotovox3086 10 месяцев назад
Thanks for the tutorial. It's very well done. I am working on my 1975 La Grande Bug/Superbeetle. There are a couple minor differences but your video was more than enough to help me get everything apart. I discovered rust under the outer window scraper so I'll be doing some touch-up paint before I put everything back together.
@mandfmarine
@mandfmarine 3 года назад
Your the man. Thank-you for not only the great content but love the clips and style. I’m a 39 year old and your helping me build my child hood dream Baja bug, thank-you
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks M&F. Glad you enjoyed it. Stay after it on that baja!
@richardmiller3919
@richardmiller3919 2 года назад
Good morning ☀️ and ☕️ I join your channel and of course I enjoy watching your video.. very beautiful job to do on this car! Tell you … YOU are lucky to use YOU TUBE to learn more about VW.. In the past I had to use books.. Thank you for your post!
@JayDubCustoms
@JayDubCustoms 2 года назад
Yep, social media platforms have completely changed the "how-to" world.
@marcoalvarez5681
@marcoalvarez5681 3 года назад
It is really clear without short cuts, a learning experience thank you
@MajorHenricks
@MajorHenricks 3 года назад
Much better than the JBubs video; thank you.
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Professor!
@monovenaros
@monovenaros Год назад
This was the most clarifying video I ever watched about how to dismantle the door. Well done, mate
@JayDubCustoms
@JayDubCustoms Год назад
Thank you!
@jrobles5350
@jrobles5350 Год назад
This is a GREAT video !! I am going to be following this step by step... thank you !
@JayDubCustoms
@JayDubCustoms Год назад
Thank you!
@triniespiritu9424
@triniespiritu9424 2 года назад
Thanks Jay, it’s big help.
@JayDubCustoms
@JayDubCustoms 2 года назад
Glad it helped Trini
@hillbrothersarcade7630
@hillbrothersarcade7630 2 года назад
This is the BEST video I've ever watched for my beetle. Thank you SO SO much for taking the time to explain the details.
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks, glad you liked it. I gotta put some more out there. 😁
@bmlawless
@bmlawless Год назад
Great video, thank you. Just what I needed to replace the scrapers on my 1972 Super Beetle!
@filernestopaculan5351
@filernestopaculan5351 Год назад
thanks...I appreciate the way you demonstrate
@dunlapmichaell
@dunlapmichaell Год назад
The video helped me figure out how the felt in removed and installed again. Thanks for making the video.
@MakeItWork413
@MakeItWork413 5 месяцев назад
This is a fantastic resource, thank you!
@JayDubCustoms
@JayDubCustoms 5 месяцев назад
Glad it was helpful!
@gohancolores
@gohancolores Год назад
Thank you for the quality of your videos! They are the best ones to learn "how to"
@michaeld.3779
@michaeld.3779 3 года назад
Great video. I noticed the outside scraper at the back had a curled edge. I had this same anomaly with my Wolfsburg West “German” scraper. Also, when you had the wing window out, that was a good time to adjust (usually tighten) the hinge/pinch bolt at her bottom of the window. This keeps it so the wind won’t alter the position of the window. Snug, but not so tight that the window won’t turn, lol.
@JayDubCustoms
@JayDubCustoms 3 года назад
Yes, that curled or bowed out rubber in the corner really bugged me. I parked the car in the sun and put a piece of masking tape on it to hold it against the window. It helped a little but still noticeable.
@OTTO-1303
@OTTO-1303 2 года назад
Excellent tutorial
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Otto. Glad it was helpful.
@jasonlinder9923
@jasonlinder9923 3 года назад
Enjoyed the windsheild video as well, thanku for taking the time to share
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Jason, hope they were helpful.
@jasonlinder9923
@jasonlinder9923 2 года назад
Doing my scrapers this weekend, did you happen to cut scrapper at wing window, so the rubber is flat at glass? Prolly would not have taken on this task without your video, thanku again for another fine video.
@JPOtto-bm6kq
@JPOtto-bm6kq 2 года назад
Awesome! I was anxious about tearing down the door to do this project, your video has broken each part down with great detail. I just got a 1970 and thought all the interior knobs were sun rotted plastic. When I went to replace them I noticed I had wooden knobs for everything! Never knew bugs had wooden accents, but I see all your knobs are wooden too! I sanded and varnished and they look great now!Subscribing and will be back for the next project. Great job, and thanks.
@JayDubCustoms
@JayDubCustoms 2 года назад
J.P. Glad you liked the video. Yes, those wooden pieces are aftermarket add-ons. Mine were on there when I bought the car.
@erosroyarocho7273
@erosroyarocho7273 3 года назад
Thanks for the tutorial! Great job.
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks ErosRoy!
@MariusvanderWalt1
@MariusvanderWalt1 Месяц назад
Thank you, great detailed explanation. It will certainly help me.
@JayDubCustoms
@JayDubCustoms 20 дней назад
Glad it was helpful.
@jackymejia1739
@jackymejia1739 2 года назад
I love what you did.My 68 VW needs this,,probable replacement the vents on boths door. I enjoy your video.
@JayDubCustoms
@JayDubCustoms 2 года назад
Thank you Jacky.
@brucegillies1694
@brucegillies1694 Год назад
I did truly enjoy your vid. and learned a lot also ! Great job !
@MarkLoves2Fly
@MarkLoves2Fly 2 года назад
Thank You! This is the video I needed to see! My little '72 is getting the same treatment. ✌😀
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Mark, hope the video helps.
@MarkLoves2Fly
@MarkLoves2Fly 2 года назад
@@JayDubCustoms Indeed it does.
@jeffclark3924
@jeffclark3924 2 года назад
Excellent video. I replaced the outside scrappers and window channel on my super last summer. I ended up spraying silicone lube on the new window channels. It really helped.
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Jeff, I'll have to try the silicone.
@steve9173
@steve9173 2 года назад
Great video. I have to replace my scrapers soon. This will help so much. Thanks.
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Steve!
@glenbamforth9878
@glenbamforth9878 10 месяцев назад
Best most thorough video I’ve seen. Thank you!
@JayDubCustoms
@JayDubCustoms 9 месяцев назад
Glad you enjoyed it!
@chesterumana9779
@chesterumana9779 2 года назад
Thank you, great tutorials! Keep those videos going!!!👍
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Chester.
@francodesapri9174
@francodesapri9174 Год назад
fantastic video and nice teacher .. thanks
@mikehammer4546
@mikehammer4546 3 года назад
Excellent job on the instructional video. 👍👍
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks! Glad you enjoyed it.
@jedschleisner8960
@jedschleisner8960 3 года назад
Good video! Nice delivery!
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Jed, hope it was helpful.
@JohnRash-sq6zu
@JohnRash-sq6zu Год назад
Learned a lot,Thank you
@67VWForever
@67VWForever 2 года назад
Nice Video Jay,, a nice example of smooth teaching,, some I new about already from my 64 bug but now I'm fully Restoring a 67..
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks James, hope it was helpful.
@davidhouston749
@davidhouston749 2 года назад
Excellent video and all done at a good pace well done
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks David!
@owenstrawn
@owenstrawn 3 года назад
Excellent video!
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Owen, hope it helped.
@maurorossi7078
@maurorossi7078 2 года назад
Bravissimo, è un video molto molto utile!
@jameslee6494
@jameslee6494 2 года назад
Well explained, very details as I ever saw here. Great job, I immediately subscribed.
@JayDubCustoms
@JayDubCustoms 2 года назад
James, glad you enjoyed it. Thanks for the sub!
@robertfair1770
@robertfair1770 Год назад
Thanks, I wish I had a Video of the proses for my year..
@jackietrujillomoran4977
@jackietrujillomoran4977 Год назад
Great step by step instructions.thx
@JayDubCustoms
@JayDubCustoms Год назад
Thank you!
@richardlinsalato8973
@richardlinsalato8973 Год назад
Very nice video. thank you for the way you detailed the process.
@JayDubCustoms
@JayDubCustoms Год назад
Thanks Richard... appreciate it.
@frankmick8683
@frankmick8683 3 года назад
Nice video (A ''cross'' Tip is called a Phillips and a ''Flat'' tip is called a standard)
@DanielinLaTuna
@DanielinLaTuna 3 года назад
Hey Jay, thanks for the refresher. I did mine some forty-five years ago when I was in my early twenties. The originals lasted about 13 outside years of hot California summers, and the replacements almost four times as long garaged in Oregon. It's time I replaced them again. My wife is a fiddler and makes like she's going to open the windwings but I don't let her since I haven't operated them since the late seventies. It's a 1963 Bug. One thing I'd mention - as long as the panels are out, clean out the weepholes at the bottom of the inside. They get plugged up and will cause rust. Also, you didn't have a clear plastic (visquine) between the door and the door panels? The plastic keeps moisture away from the cardstock panel. Finally, I love German engineering! Even in a low end product they pay Porsche quality attention to the details. Everything fits with precision. Thanks for sharing.
@JayDubCustoms
@JayDubCustoms 3 года назад
Daniel, yes I always clean inside the bottom of the door, just didn't mention it. I get in there with a vacuum and even knock dirt loose with a screwdriver if I have to. Yeah, I could have replaced the sheet of visqueen but didn't have any and old ones were brittle. Thanks for sharing.
@AndyHinkson
@AndyHinkson 2 года назад
You’ve owned the bug since new? It must be a real gem. How many miles?
@DanielinLaTuna
@DanielinLaTuna 2 года назад
@@AndyHinkson , no, not the original owner. I bought it from my cousin. I drove it for about ten years, then gave it to my parents who took it up to Oregon. My mom gave it back to me four years ago, when they stopped driving it. It’s a fun vehicle to drive around in, especially since so many people want to stop and chat about it with me. Cheers 🍻
@superbear617
@superbear617 2 года назад
Very nicely detailed video. 30 minutes went by fast!
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Super Bear!
@SpiroAbdalnor
@SpiroAbdalnor Год назад
THANK YOU,,,,,,,,,,,,,,,,LONG LIVE BEETLES
@PhotoAlbert
@PhotoAlbert 2 года назад
Terrific video! There's a lot more to this job than I expected. I recently purchased a 1970 Beetle. The previous owner had the windows tinted and some of the tinting on the driver's side window has scraped off. The scrapers seem ok and the passenger widow tinting is fine. So I'm not sure why the tinting on the driver's side is damaged. After watching your video, I think I'll just live with it until the scrapers need replacing.
@JayDubCustoms
@JayDubCustoms 2 года назад
Hope the video was helpful. I've always thought it's easier to take the windows out when tinting. Maybe do it at a time when you're replacing window rubber.
@ritagilbert9321
@ritagilbert9321 3 года назад
I'm with Gomer.😆 Shazam... I didn't realize the rubber scraper was gonna be on a frame.
@JayDubCustoms
@JayDubCustoms 3 года назад
LOL!
@Sandfleez
@Sandfleez 3 года назад
Outstanding video !!!!!!!!!!!!
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Sandfleez!
@mrjamrol
@mrjamrol Год назад
Well done- thank you!
@JayDubCustoms
@JayDubCustoms Год назад
Thanks James.
@mperez5920
@mperez5920 2 года назад
Great video, thank you, so informative.
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Margaret.
@jimmyalmaguer2719
@jimmyalmaguer2719 Год назад
Good job
@LouisworldMyLifeMyDiet
@LouisworldMyLifeMyDiet 3 года назад
Really helpful thanks
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Banksy! Glad you liked it.
@TheGlottis
@TheGlottis 6 месяцев назад
Great video! really helpful
@JayDubCustoms
@JayDubCustoms 6 месяцев назад
Thank you.
@fuzzyco3
@fuzzyco3 5 месяцев назад
Thanks for the info. Very good video.
@JayDubCustoms
@JayDubCustoms 5 месяцев назад
Thanks for watching!
@valdiviajr1
@valdiviajr1 3 года назад
Thank you for the video
@JayDubCustoms
@JayDubCustoms 3 года назад
You're welcome.
@ronaldscott7104
@ronaldscott7104 2 года назад
Great video and information
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Ron!
@jerryrichter4904
@jerryrichter4904 3 года назад
very well explained
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Jerry!
@juniorclassicvwbugs924
@juniorclassicvwbugs924 3 года назад
Awesome video, well explained
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks! Hope it was helpful.
@juniorclassicvwbugs924
@juniorclassicvwbugs924 3 года назад
O have to do the same to my 1971 super beetle. It’s missing the inner one.
@1SIMONdeGEKKE1
@1SIMONdeGEKKE1 2 месяца назад
Great video thank you so much!
@JayDubCustoms
@JayDubCustoms 2 месяца назад
Thank you.
@jasonlinder9923
@jasonlinder9923 2 года назад
Also vent window bolt the difficult cross screw, I used a impact gun on worked like a charm, and my hardware had never been touched, hope this helps someone.
@JayDubCustoms
@JayDubCustoms Год назад
Thanks Jason.
@roberthasserd513
@roberthasserd513 2 года назад
Thank you
@stephenlepore4476
@stephenlepore4476 9 месяцев назад
fantastic! thank you sir!
@JayDubCustoms
@JayDubCustoms 9 месяцев назад
You bet!
@MajorHenricks
@MajorHenricks 3 года назад
The inner plastic weather shield should be installed; at least tell the viewer.
@blakeerdmann
@blakeerdmann 3 года назад
Nice video. Very well explained. Thanks. I subscribed.
@JayDubCustoms
@JayDubCustoms 3 года назад
Thanks Blake, hope it helped. Thanks for the sub!
@KCPurpleBug
@KCPurpleBug 3 года назад
Thanks I need to do this to mine
@JayDubCustoms
@JayDubCustoms 3 года назад
Cool, I hope the video will help out.
@CAMERAMAN173
@CAMERAMAN173 5 месяцев назад
very well done informative video
@JayDubCustoms
@JayDubCustoms 5 месяцев назад
Thank you!
@christophertideberg1873
@christophertideberg1873 10 месяцев назад
Thank You!!!
@JayDubCustoms
@JayDubCustoms 9 месяцев назад
No problem.
@elpez71
@elpez71 2 года назад
Awesome video great details on assembly👍 I have a 71 Super. I would imagine it sets up and works the same to install??
@JayDubCustoms
@JayDubCustoms 2 года назад
Yes John, supers and standards have the same doors.
@douglasswinehart7505
@douglasswinehart7505 2 года назад
Nice video Jay, the newer bugs, guessing 73" up have fewer clips. Thanks for your tips.
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Doug!
@judithjosey2486
@judithjosey2486 2 года назад
Thanks man, also love that color 👍 it's just like my 70. I don't know what to call it when it reaches this shade, so what about race-rust-red?💡
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Judith, just seeing your comment. 😁 Yes, race-rust-red will work.
@richardmiller3919
@richardmiller3919 2 года назад
European cars usually use 10, 13, and 17 MM That is what I like most when you need to use..
@MajorHenricks
@MajorHenricks 3 года назад
The scrajpper rubber should be trimmed/cut, to butt against the center guide, so that the rubber will contact the sliding glass.
@JayDubCustoms
@JayDubCustoms 3 года назад
Good point, I'll take another look.
@67VWForever
@67VWForever 8 дней назад
Wow I did not realize it was that long ago that I made a comment on your video I'm just about done with my 67 I just got German scrapers inside. and outs for my doors ordered I do need to clean my regulators they're just a little grungy but they're okay I was trying to save my original outer Scrapers but by the time I got into them they were in pretty bad shape they looked okay on the outside but where the felt goes they were pretty cracking beat up I should be getting them on June 19th..
@JayDubCustoms
@JayDubCustoms 7 дней назад
Hope the video helps you out.
@paulnewman6918
@paulnewman6918 3 года назад
Thanks Jay for the great explanation. Is the process exactly the same for a 73 Type 3? Also how do you replace the knob on the quarter vent window?
@JayDubCustoms
@JayDubCustoms 3 года назад
Paul I've never wrenched on a Type 3 but I would imagine it is very similar to the Beetle. The vent knob involves a rivet. I'm working on a video about all windows for a 71 Super Beetle convertible. Hope to get it posted soon.
@anangelshero0410
@anangelshero0410 2 года назад
Thanks for the video‼️❤️ Would you recommend using white lithium grease (or any other product) to keep the rubber from drying out?
@JayDubCustoms
@JayDubCustoms 2 года назад
Rob, the lithium is more for metal and plastic parts like the window regulator. Keeps it lubed. Never really thought of putting something on the scraper. Maybe some Armor All occasionally or another dressing for rubber.
@SDsailor7
@SDsailor7 Год назад
I would like to know how long does this job take from beginning to end? Excellent video very informative and interesting,
@JayDubCustoms
@JayDubCustoms Год назад
I've done quite a few, so about an hour per door if all goes well.
@SDsailor7
@SDsailor7 Год назад
@@JayDubCustoms I would probably take me about 3 hours per door not counting the problems that appear a long the way.
@angelrodriguez5464
@angelrodriguez5464 2 года назад
Definitely appreciate the video, GREAT JOB!! Issue I'm having is when I roll the window down and then back up, it's getting caught behind the outside scraper; what would you recommend for a fix? Is there anything to apply to assist the window to move up/down easily? Really enjoyed your video. Thank you again.
@JayDubCustoms
@JayDubCustoms 2 года назад
Thanks Angel, you may have to drop the window glass down (5:45) then press on the scraper with your fingertips and ensure the clips are snapped into the door. And maybe even roll the edge of the soft metal away from the glass towards the inside of the door. Then position the glass all the way up before tightening the bolts (29:40).
@jasonlinder9923
@jasonlinder9923 2 года назад
It did help somebody thanks
@philrogers433
@philrogers433 5 месяцев назад
Great videos. Any idea what size those phillips screws are for the scraper and the vent window inside the top?
@JayDubCustoms
@JayDubCustoms 5 месяцев назад
The small one in the scraper is a #1. The larger one holding the vent window is a #2. That one is usually tight, so put some upward pressure on it when turning it to avoid stripping it out.
@kiminaz
@kiminaz 5 месяцев назад
This is a great tutorial for replacing the window scraper. We got all of it done until the window separated from the window sash trying to roll it back up. The sash was all rusted out. Waiting for that so we can finish the job. Any suggestions on getting the window to roll a little easier? It’s so tight with the felt and scraper.
@JayDubCustoms
@JayDubCustoms 5 месяцев назад
Thanks, hope the video was helpful. Yes, I know what you mean with it feeling tight, and it'll be that way because everything is new. Only thing I can suggest... loosen the 2 bolts that hold the glass to the regulator, roll it all the way up ensuring it's aligned properly then re-tighten the bolts via the two access holes.
@josephcammarata6954
@josephcammarata6954 2 года назад
Great job what about a convertible thanks Joe from Exeter New Hampshire
@JayDubCustoms
@JayDubCustoms 2 года назад
I’m actually restoring a 71 Super Beetle convertible. I’ll do a video on the scrapers.
@josephcammarata6954
@josephcammarata6954 2 года назад
Thanks I'll be on the lookout again excellent informational video
@timothyriley4209
@timothyriley4209 2 года назад
Isn't there usually a spring behind the door panel right where the window crank is?
@JayDubCustoms
@JayDubCustoms 2 года назад
Yes there is. It keeps the panel against the crank so no gap. I should have put one on it.
@mperez5920
@mperez5920 2 года назад
Reading the comments are so so helpful to! ! I also subscribed.
@lemonhope1830
@lemonhope1830 2 года назад
I’m gonna do the same to my 1971, but I don’t want to add the chrome trim around the window. Can it be done?
@JayDubCustoms
@JayDubCustoms 2 года назад
Don't think so... the trim and the rubber are made as one piece. The trim is what actually holds everything in the window. One option would be to black it out.
@davidgriffiths6179
@davidgriffiths6179 Год назад
Nice vid, in the uk we call the event window the quarter light. But more importantly having real difficulties with the winder mechanism. Any ideas ?
@JayDubCustoms
@JayDubCustoms Год назад
David, are you referring to the winder for the main door window? If so, I use white lithium grease to lubricate the track. If it's rusted bad enough you should take it out of the door and put some lube on it like WD-40 and wind it up and down until it moves easy. Then the lithium when you put it back in. Also, sometimes the 2 bolts at the bottom of the window glass come loose and then it will bind up in the felt channel causing it to feel tight. Check that too.
@davidgriffiths6179
@davidgriffiths6179 Год назад
Hi yes it's the winder mechanism. Am on my second new track , lubed up as you say but I wonder if the door edge track is out of place ? Through rust etc . I have the window in after 3 days but it goes up ok but struggles to come down without a push from the top. Got rid of the fancy wonders now have the correct splined original black handle.
@timavery7984
@timavery7984 2 года назад
What about recovering inside of door with plastic ?
@JayDubCustoms
@JayDubCustoms 2 года назад
Tim, yes I should have covered that step. But it's basically to keep the back of the door panel from getting wet if driving a lot in the rain, or from a car wash.
@suzettegerber5369
@suzettegerber5369 Год назад
Hi, Jay. I am in the process of restoring my 1970 Beetle and I noticed that mine doesn't have the vent wing. I'm not sure what to do with the scrapers and felt channels, do you have any advice? Love the videos, super helpful and informative. Keep it up 🎆
@JayDubCustoms
@JayDubCustoms Год назад
Suzette, Someone probably removed those to install a "one-piece" window. They are primarily for looks. I suggest you find a pair of vent windows and put them back in. They keep the bug original and are nice for directing air into the car when driving in warm or hot weather. The stock scrapers will not fit correctly without them. You could most likely find a pair at a VW show and swap meet. I might have a couple, I'd have to look. What state are you in? There's 3 shows coming up this Spring in the TN and NC areas.
@suzettegerber5369
@suzettegerber5369 Год назад
Unfortunately I am in South Africa so not going to be possible 😂 but I will check if there are a few options on my side. Thank you so much for your help
@Franklynnart
@Franklynnart 2 года назад
Do you have a video or can you explain how the vent window comes out on convertible (72)
@JayDubCustoms
@JayDubCustoms 2 года назад
David, sorry for the late reply but there's 2 bolts at the top... they're on the top corner, outside of the door facing the front of the car (10mm). Then there's one inside the door behind the door panel near the bottom of the door. It's an adjusting type bolt to move the vent window side to side. Those 3 are the only ones holding in the vent window.
@Franklynnart
@Franklynnart 2 года назад
@@JayDubCustoms thanks so much. I will try that in the morning. I believe there is a Phillips screw in the vent channel under the seal as well
@lukehaney7657
@lukehaney7657 8 месяцев назад
What are the part numbers or links from Wolfsburg west?
@JayDubCustoms
@JayDubCustoms 8 месяцев назад
For 65 to 77 Bug outside scrapers is 113853321D for left side and 113853322D for right.
@goldentrunnell7450
@goldentrunnell7450 3 месяца назад
I just replaced the scrapers on a 63 beetle, the inner scraper uses the wire style clip. Can you use the newer style like you used in this video? I believe it's a 65 and newer version with the ones you used in this video.
@JayDubCustoms
@JayDubCustoms 3 месяца назад
@goldentrunnell7450 I know what you mean with the wire type clip. I've never switched them out, but I imagine the rectangular holes in the door are the same on both early and late models. I'd have to look. If that's the case, either clip would work on the door. The newer style seems to be softer and more flexible when snapping into place. I just don't know how you'd remove the wire clips from the scraper and then attach the new type.
@67VWForever
@67VWForever 2 года назад
The only thing crucial that you're missing would be the plastic sheeting To keep your door panel from getting wet Just FYI..
@JayDubCustoms
@JayDubCustoms 2 года назад
Yeah I went back and added it, just didn't do it during the video. Yes, key to keeping the door panel dry.
@darrenochoa9211
@darrenochoa9211 2 года назад
Hey Jay.I was wondering about the parts that you ordered from Wolfsburg. Did it come in a whole kit,or did you have to order each part separately?Thanks Darren.
@JayDubCustoms
@JayDubCustoms 2 года назад
Darren, it's 4 separate parts. Here's part numbers: 113853321D, 113853322D, 111837475B and 111837476B.
@mperez5920
@mperez5920 2 года назад
Saved me time to look up parts, thank u
@christopherandujal7809
@christopherandujal7809 3 года назад
Link to where you bought it?
@JayDubCustoms
@JayDubCustoms 3 года назад
www.wolfsburgwest.com/cart/DetailsList.cfm?ID=113853322dgr
@bobunderwood5357
@bobunderwood5357 Год назад
Is this basically the same install for "71 Bus window scrapers and felt channel??
@JayDubCustoms
@JayDubCustoms Год назад
I haven’t done one on a bus, but I can’t imagine it being much different. I’m sure VW used the same engineering on multiple models.
@bobunderwood5357
@bobunderwood5357 Год назад
Trying to decide if I want to dive into this project or not! Your video gives me HOPE!:>)
@procesocarlos4567
@procesocarlos4567 2 года назад
What is the PN
@JayDubCustoms
@JayDubCustoms Год назад
113853321D for left side and 113853322D for right. Fits 65 to 77. Buy from Wolfsburg West. www.wolfsburgwest.com/cart/DetailsList.cfm?ID=113853322d
Далее
VW Beetle vent glass restoration HOW TO diy
18:42
Просмотров 1,8 тыс.
Rebuilding VW Beetle Door Hinges - Curt's Bug part 21
23:43
VW Beetle IRS Transmission Removal
18:50
Просмотров 4,2 тыс.
‘65 VW Bug Vent Window, Scraper and Felt Install
20:45
How to install a VW Beetle door window
10:57
Просмотров 12 тыс.
Driving a 100-Year-Old Ford Model T In 2024! (Part 1)
50:50
1965 VW Bug Door Hinge Replacement
11:38
Просмотров 635