Glad I watched this. Replacing a set of leaking KWs on my T5.1. Ordered a set of B14 komfort lows and wasn’t aware of the need for the dust covers! They didn’t come with so have just ordered a set.
Had a T5 with a knocking sound when turning the steering ...... Noticed under the wipers that the shock wasn't centered in the gap and knocked against the chassis...... Turned out to be a worn stabilizer link that caused the shock absorber not to stay centered while turning the steering wheel .....unfortunately the T5 does not have nuts on top like normal cars that holds the shock in place
Thanks guys! Recently fitted the twin adjust low kit and have a knocking on the rear, new spring seats from you guys fitted. Bump stops cut down, spring seated correctly. Seems like maybe knocking from adjuster? I heard the spot welds can rattle against the collar. Not sure what else to look for.
Ive a 2005 t5.4 mo...whats the cheapest 50mm.lift..EVERYTHING i need to do it..ie diff spacers...etc...anything else i need ?..eg.longer brake hoses? Have you a full video on this job please. Cheers..
Great vid for teaching the likes of myself about Transporter suspension! My 2011 T32 has developed a knocking on front driver side as of late - new d bushes on anti-roll bar, new track rod end, checked the top nut and tension OK.... but alas she still knocks when steering! Looking in wheel arch today with the other half steering I can see towards top of shock assembly it's not a smooth motion, it's a jump jump jump creating the knocking. Well out of my realm so it's off to the garage - but would you hazard a guess at what's up? Bit of corrosion in there but passed MOT like it in December.
So hard to say. What suspension are you on? If it's coilovers, the first thing I'd check is if the install fitted the OEM top nut. One of the solow approved installs would be able to diagnose it I'm sure. solowsuspension.com/solow-installer-network/
Great video can you do a video on getting them safely up on a trolley jack. Had a look and can’t see much details on that as most people don’t have access to a ramp and these vans are heavy. Thanks
Just bought the full so-low LOW kit etc with all the trimmings.. Are all ur installers around the country trained with the knowledge that u just all explained. I am going to take it to a&t motors in newbury. Thanks again
I cut the rear bump stop housing down as pointed out. I removed the rubber first which simply pushes into the housing. However, the housing (tube) was sleeved and seemed to be held by wax...?! After shortening the tube with a grinder, the sleeve wouldn't stay in place and therefore wouldn't hold the rubber bumper... This was 2 years ago now but I think I have explained it right. Any advice?
Hi, bit late to the chat, but can you help. I noticed the numbers on the front springs, my komforts have 6/21 as the top number, what relevance is this please?
The description of your video implies you’ll be discussing noises etc so we know what noise indicates what’s broken etc but there’s none of that in this video. You even say the same thing in the outro. It’s super helpful with insiders tips for what to do when fitting new coilovers etc but it’s not useful at all for fault diagnosing which I thought was the whole point to the video? 🤷🏻♂️
Nice vid guys. Do you have your service stations in europe? Or do you recommend anyone for this kind of suspension work? In particular: Poland, Germany. Thanks!
Hi I replaced my rear broken lowering springs with stance + & adjusters. T5.1 now going over a small bump there's a hard knock. Been told there not compatible with standard shocks. Do you think this is the problem?
Are the twin adjust projekt dampers the same as the b14s on a 4motion with the bushing offset? Have a set on the way from the shop in the Netherlands atm!
I’ve got a t6.1 4motion.. rides great on b14. Just fitted the rear poweflex bushes and putting it back together the rear left axle seems to be “stuck” hanging down.. it seems to have come out of the cv on the hub side no idea how get it back in.. don’t really want to open the boot 🤷🏼♂️🤦🏻♂️ anyone got any ideas lol
Had a lightbulb moment on tyres watching this. Running 275’s was a fail on my part. Will be switching to 265’s - this will hopefully solve the slight ‘rub’ I’m experiencing on a B14 Komfort set-up on full front steering lock, or when bottoming out on a compression on the road (again in the front). Also need to check if the longer drop links were fitted on my 6.1. I learned a lot watching this - thanks chaps.
Was going to call you actually about a knocking noise. Brought my T6.1 2023 California down to you earlier this year for suspension and wheels. Its developed slight knock on the left side. I'll get the dealer to check the drop links
Great video. I have 275 on my t6.1 on adjustable coil overs. When Reversing up a slight incline my transporter grinds to a sudden halt. If I go really slow I get no issue. I cannot see that the tyre has caught anything. It sounds like I’ve hit something but I haven’t. The front hasn’t ground out etc. Any ideas?
Depending of the width of the rim. 8,5J need a smaller tyre than a 10J for example. For 8,5 is the recommendation between 235 and 255 so for the best is 245.
Will a 265/40 tyre fit on a 10j rim? I have staggered alloys on my van with 275/40 tyres fitted and was told 275 is as narrow as you should go on a 10j rim.
Yes although I didn't know the internal dimension of the ST springs. The B14 adjuster delete on our website is the narrowest. That will be most likely be the best fit.
Can you lads do a job for my 2006 t5 130, all front bushes and rods re new and drive shafts and steering knuckle if needed. Iv got play and front knocking Cheers
Do you take the top rubber out on the rear spring? I’ve bought your updated lower rubber but still got an annoying creaking when I brake so thinking it’s the top rubber.
If you have adjustable suspension, yes you remove the top rubber plate. If you have just springs with no adjuster, you need a top rubber though. Some of our spring only sets come with a replacement to the EOM one.
Ref: 'Bilstein B14 Komfort with Eibach Pro Lowering Springs' on a 6.1 California. Please can you advise how much threaded adjustment you get on the Rear Adjusters ~40mm or more? I think there is nearer ~ 70mm on the front, but it is the rear where it's needed as Californias are much heavier than standard Vans or Kombis and typically have ~40mm of rear sag! Bilstein quotes typical lowering of 30 - 50mm and others quote 50 - 70mm. Aware that the shorter spring accounts for ~ 30mm, although stiffer. Many thanks.
Sorry, meant to add I wish to keep the max height at the rear (for extra load of a Camper and associated kit) and lower the front to level accordingly.
There isn't an exact calculation as all vehicles are different especially when loaded. We see vehicles a lot heavier then a Cali so they are ideal for those too. I'd genuinely set the rear 20mm higher then the front on the adjust to allow for weight. So set the rear at the highest and adjust the front down 20mm on the adjuster. It's trail and root though. You may need a few attempts to get it right. The front is easier to adjust so I'd set the rear high. You can then easily tweak the front
