VW VANAGON T25 - Engine Mount / Bush Replacement - Removal & Refitting

Подписаться 4,8 тыс.

50% 1

Today I'm removing and refitting the engine mounts / bushes on my VW T25 Vanagon Volkswagen Type25. The replacement bushes came from Coolair VW linked below as are some of the tools and products I used to do the job, hope it helps :)
CoolAirVW: www.coolairvw....
5% Discount Code: PEOPLESCAR
[This is not an affiliate code, it just saves you money! If you want to support the channel, please see below for affiliate links and Patreon, many thanks :-) ]
Seafoam Deep Creep Penetrating Oil:
EbayUK: ebay.us/uwtzcl
EbayUK (Good Seller I bought twin set from): ebay.us/7gtX0s
EbayCOM: ebay.us/ohnw17
Eastwood Extension & UJ Kit:
EbayCOMebay.us/fBWKFO
Universal Joint for ratchet/wrench (I Used a 1/4 Inch drive)
EbayUK: ebay.us/yAolru
ebay.us/ZEl7kT
Extension drive bars:
EbayUK: ebay.us/RT6RZT
EbayCOM: ebay.us/mMgpdd
1/2" or 3/8" to 1/4"Converter/reducer when need a bit more crank from a bigger ratchet.
EbayUK: ebay.us/TVcXXK
EbayCOM: ebay.us/u9uQKr
Heavy Duty Copper Grease Paste:
EbayUK: ebay.us/I1O0C2
EbayCOM: ebay.us/tOG8mH
EbayCOM (other manufaturers): ebay.us/E1jP0y
Ntrile Work Gloves (I like them tighter for workingon the car and use a size 8-9, if have large hand I suggest 9-10)
EbayUK: ebay.us/4v3a2q
EbayCOM: ebay.us/BDEhWN
WIN a VW SPLITSCREEN Log Burner - FREE Entry
• FREE RAFFLE WIN this V...
If you a found any of my work super useful and would like to buy me a coffe.....I mean BEER! 😅🍺 in thanks...... Here is a link to use.
ko-fi.com/peop...
Patreon:
/ peoplescar
PeoplesCar Merch T-Shirts, Hoodies, Mugs, Stickers, Prints etc
1) CHOOSE YOUR DESIGN
2) CHOOSE YOUR PRODUCT
www.redbubble....
(my hoody is small fitting so I'd order a size up)
Many Uber Thanks 😊
00:00 Intro
00:21 Engine Mount Explanation
01:59 Access Explanation
02:50 Engine Strip Down
03:40 Loosen Engine Mounts
05:58 Clearance Problem
08:13 Mount Refitment
11:04 Engine Back Together
11:38 Belt Tensioning
12:14 Water Pump Pulley Wheel
12:45 Outro & Test
#vwt25 #vwt3 #vwvanagon

Авто/Мото

Опубликовано:

15 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@ericschmitt7369 3 месяца назад

appreciate the tutorial! thanks! I plan to do this job soon.

@PeoplesCar 3 месяца назад

No problem 👍 I'm curious to know if my exhaust issue was unique to my van or the same for all later T25's (I'm assuming VW were cleverer that that lol). Would appreciate some feedback if it's not too much trouble? Best of luck 😊👍

@davidrowe5822 2 месяца назад

Thanks for the video! Very helpful... Curious...Why not drop the engine bar completely to swap the mounts as a matter of course? I plan to do this tomorrow and needed assurance that Im on the right track. I have a power steering pump as well so it is very tight down there. Great tips for removing pulleys. I had not thought of that to gain access. I plan to have a magnet on hand when I drop the nuts into the cradle! ha ha! Thank you so much!

@PeoplesCar 2 месяца назад

On the previous van I just jacked the engine up a few inches and was an easy job. The engine bar is often all rusty and crusty on the body rail but if that's easier for you as I had to do then it's pretty straight forwards too. Just thr angle on the outside 2 mounts means attaching them first to the engine. Best of luck 😊👍

@hermesjackle5903 2 месяца назад

My Waterboxer wobbles quite a lot on tick over, I 'm thinking mine need changing.

@PeoplesCar 2 месяца назад

Without comparing to another its hard to know how much movement there should be. I remember being shocked at how much a stock bug motor moves compared to the ones I'd had in cars with more solid mounts. I guess if you can feel the engine wobble through the van on tick over then maybe look at doing, when replaced it's much more subtle. Not sure how else to explain it. Hope that helps 😊👍

@davidrowe5822 2 месяца назад

@@PeoplesCar Agree! Spot on...Mine bangs loudly on tick over ignition. when revving, the engine moves massively. On idle, it wobbles. It is crucial to have good mounts to keep the motion down. The shaking can put stress on parts and wires so its best to perform this work to keep the van from premature failure like fuel lines, wires, etc. My van has the same issue with the exhaust pipe blocking a proper engine lift. The bar/cradle is only 4 bolts so it seems best to support the engine and remove the bar/cradle. My mounts are definitely shot.

@PeoplesCar 2 месяца назад

@@davidrowe5822 Interesting, so it wasn't just me and my exhaust setup then. Thanks for the feedback and best of luck with the job 😊👍