Ignition switch spring broken but I fixed it before thinking to film sorry. If you dont understand just ask and I'll answer or update the clip if needed. I say you might not need to remove the key cylinder but think it does need removing. If you have the same problem as I had and the ignition doesnt return to the on position after starting your can it's the spring. I held the spring with pliers and bent the broken bit with a shifter but found it's best to put the spring back on with the fixed bit down so the unbroken bit locks into the hook bit. Hope it helps and saves you money. Very easy just dont loose any bits in the switch.
7 сен 2024