I had a sneaky feeling this was going to be a follow up to Orlocks video. I am with you man. It is very inconsistent. Especially for the users who got the Goggles X. Want it to work so bad.
I feel strongly that people should keep anchored in reality that it’s an inconsistent experience. It’s not perfect, and for some it’s not even usable. I’ll be nothing but honest even at the sake of not getting sponsors.
I've been flying WS caddx for 2 years now. It's clearly not always a simple system to set up. What helped me was staying away from initial releases of hardware/firmware and let other folks unfortunately work out the kinks. It does still have smeary video in some lighting conditions and they can be somewhat mitigated by changing camera settings.
The smeary video, especially over grass is always there in all of the hardware. Better non/stock antennaes will help, and from my experience, the Pro camera will give you a better image than the micro camera, or the original v1 camera. In all three cases if you do frame grabs you'll find the smearyness and it all would appear to predominately caused by their algorithm that's used to encode the video. I think if you tested the video off the vtx vs the video off the goggles you'd find a difference. Hard to say if they will ever get that fixed, I haven't seen any firmware updates where video has been improved in quite some time.
Thanks for the video, I also wanted it to work well, I wanted to buy the glasses and vtxs, but in the end I bought DJI O3 and G2 because of these errors, I want a system that gives me confidence. Greetings!
I had to replace a ufl on the walksnail Avatar VRX,it was bent and pinched. Other people may be having this issue and not realizing it. If you pull apart the VRX it's the top right ufl,they have it routed kinda bad around the CPU in the VRX, literally bent 90 degrees.
I'm flying last year's hardware, V1 and V2 VTxs, the Dominator goggles, VRX on Sky04O Pros, and V32 firmware. Luckily things just work for me. Have about 6 quads with the older stuff on it. It appears that 'this year's' stuff is just not ready for prime time yet ... Major Bummer !
I decided to steer clear of this for my first digital setup. Some people in an FPV troubleshooting discord tried to steer me hard towards walksnail. I'm not dropping $1200-$1500 on my first quality kit and then troubleshoot right out of the box. This mess has me running straight to DJI for my first setup.
I put on 03 air unit on one of my quads the other day, much better than the 2 analog systems I had been flying. Better image, color, penetration, and distance. Although it is not without its own problems. After flying a few packs around my yard, I had a random video failsafe, the video feed froze on one frame, leaving me to land a 7 inch quad blind. Luckily I was flying extremely low, and just set it down with no damage. Also if your bit rate gets to low, the latency can be bad AF, like 3 seconds on 1 frame….when your flying 50+ mph that’s an issue, 3 seconds blind… in most cases my 03 will go where my analogs won’t, but the latency can get as bad or worse than the static on analog. All in all I think 03 is way better than analog, but it definitely is not perfect.
I hate to say it but I get analog dvr almost as good. Analog has come along leaps and bounds the last 5 yes. This kind of shit is what keeps me from going digital and I WONT go DJI soooo... maybe HD Zero??
Nice video, sorry to hear all your problems with Walksnail. For me a lot of the problems start with the Redbird antennas, there kinda like the garbage fake antennas you get with your Skyzones. Ya they work but not good so you upgrade. For me I upgraded to True RC X-Air 5.8 MKII LHCP on my goggles X. Happy Flying.
I don't know why some people keep denying the smearing issue, which has been there from the beginning. Perhaps they've never flown DJI. If you've flown DJI, it's very obvious.
There is always a little smearing 'in the grass' thats the way its rendered. But I have 1 quad, the V3 race vtx that has so terrible range and uglyness it seems forever in standby (but it isnt). So bad luck is also a thing. My other like 6 VTXes are fine. I like the V2 Pro combi the best actually
With analog you can look at the video feed and tell whether you have interference or a weak signal. Digital makes it all look the same. DJI has smearing too but not exactly the same and not as bad. The smearing can show up not just a bad signal but also if the scene is complicated and moving fast, especially if using a lower bit rate setting. The higher bit rate and higher resolution settings do not work as well for me on Walksnail as they do on DJI. The fact that it makes all the possible issues look the same though is one of the reasons it looks better than analog, just makes diagnosing an issue a bit more difficult.
Oh yeah, absolutely. I always find that the breakup is worse than the smearing as far as flyability goes for me. But for how expensive WS can be, it shouldn't even be a discussion because it shouldnt have that problem for any user.
Ya I fly all the systems and I keep going back to analog hdz is basically analog walksnail haveing problems and dji just be to expensive to break so I no I can trash a analog vtx and replace it without breaking the bank and it's basically flawless if setup correctly
I'm having huge issues w dji....osd working and vbat showing and then I lise signal like 40 feet away at 700mw with safety turned off....regretting buying dji goggles amd Vista...I lost video and had a drone fall from like 100 feet and kill a motor that's only 5 flights old....completely new build too. Put a new antenna on and testing tomorrow....if it does the same I selling it all and doing hdzero monitor to see how I like hdzero. Goggles x aren't in stock
Y'all fan boys make me laugh paying 600 for goggles y'all have to pay another 90 to 100 to get 90fps when dji and walksnail are getting in the 100s basically you pay for a little better analog
Still rocking the Fatshark Walksnail V1. No problems. Almost bought the GogglesX, glad I didn't. Lollipop 4+ on quads. Truerc stubbies on goggles. 720p. Can fly in an office park with confidence, penetration behind buildings is fine for what I do. I somehow think the GogglesX just perform worse, seeing a lot of complaints about them. Still need to send back 3(!) V1 vtx's that randomly died... One died from sitting in a quad not being flown for a few months, so that sucks...I worked fine before I got retired for the winter.
@@DanoFPV yes, I guess build quality was way better at Fatshark. The GogglesX just seem to be stuffed full (literally) of squashed electronics. Can't even fathom why all the wifi coax wires that rub away their coating etc...
