Wall-hanging Hand tool Cabinet with 4 Doors. 

WOW !

The ash grey finish was excellent...!!!!!

For a man is who impatient, those dovetails are amazing Ben

To quote Yello .... "oh yeah!" Epic build :-)

Tis’ truly a thing of beauty

Many thanks, one of the best videos I have watched on RU-vid 👍

Well done!

Enjoyed watching and listening to this

Amazing. No other words required.

What a fantastic build! Well done ! I made mine with storage on the exterior of the front as well. I recessed magnetic strips so that I have infinite possibilities and several more square feet of hand tool storage as well as nothing clanking around when opening and closing.I have my most commonly used tools on the front. I can't afford to waste any wall space in my tiny shop.

Would have loved to see the rest even if it was in parts. Very cool build and beautiful result none the less. Loved the trick with the card scraper and the saw kerf for the back saws.

Great result. Premiership level tool control. Editing must have taken ages. Thanks for the inspiration.

Absolutely.stunning work and amazed with your skills.

Awesome job, some beautiful tools in there.

That wood grain burn/finish effect tho 😍

Lee Valley had a catalog cover photo once with an similar antique case that had a complete set of hand tools packed like it was ready for travel. Carpenter to go!

Very interesting techniques, thanks for making this video.

Excellent Brother 👏👏👏👏 Inspirational 💝 I love it Thanks for share 👍🙌🙏🏻

Stumbled across this today, beautiful work!!!

Great build and some nice camera work at 12:50. 👍👍 Kubrick reference?

Beautiful cabinet!

Beautifully done!

Like the music, you do nice work also.

I'm quite impressed!

I enjoyed watching how you made the tool cabinet and how the tools were organized. Great Job.

Came across your channel via rag n bone brown. Man you have some great skills! My dad was a carpenter and I have all his old tools, I went the engineering route but hit retirement now. Your Tool Cabinet build has given me the inspiration to restore all his old tools and using them to try to make something worthy to keep them in. Who says you can't teach a old dog new tricks..... going to give it a damn good try. Thanks

Ben your expertise in the film industry shows up big time and your music selection was so enjoyable and comforting to listen to as you did your craft. Great workmanship and beauty as well. I look forward to more of your talents on RU-vid. BRAVO

I just checked 2-3 of your vids, really nice, plus super nice music in all of them, but I could not shazam it at all? Thanks and good luck!

P.S. Your dovetail work is Second to NONE, Excellent Work.

Wowwwww aprendi mas en 28 minutos.. que todos los videos q vi hasta ahora..

Really enjoyed this, thanks for sharing. I'm about to start again in a new workspace so there are some cool tricks I can take away from this video Cheers Ash

Absolutely amazing work, bravo, sir.

That is absolutely fantastic. Subscribed 100%. I'm a bit jealous, not gonna lie...(Talent and tools, lol) Nice job!

Fucking hell you're good. Thanks for sharing.

Very Nice cabinet, especially the 4 sections! But I gotta ask, how many chisels do you really need?? LOL!

Awesome craftmanship Sir. You got a new subscriber

Hello Ben and congratulations for all the beauties you offered on your channel. I’m thinking of building a tool cabinet for my sculpture and Luther’s tools The one you have made is my favorite. Can you tell me how deep are the doors? One more time bravo bravo bravo! I keep following your channel despite the fact that I don’t understand all the things that you say. You’re talking so fast 😂

13:23. A really good advice that came a little too late for me LOL. Practice makes perfect, though. Just found your channel today and love it. Thanks for sharing your craft!

Dog the piece and the music choice

Found your channel just ‘this week via your shop tour video which cracked me up:-) Loved watching this build video - no fuss, no muss, very inspirational. Personally I liked the music; can you add the details of it to your description maybe? Subscribed and looking forward to diving into your other videos - keep up the great work!

Excellent 👴🏻🇦🇺

Nicel

Did anyone else see the slow-mo kick in at 22:28 and think something terrible was about to happen?

A great build! I think I'm going to get my dovetail template out now! 😊

I'm late to the party, heard about your page from ragandbonebrown and I am full of admiration for your work. I'm going to have to sharpen my chisels and practice those dovetails.

Belo trabalho

suuuper cool!! but wouldn't it be better to have the latches for the front compartment on the bottom, that would you could opn that without opening the door completly first?

That was amazing really enjoyed that. Very inspirational. Am I right that your in UK 🇬🇧? Seen the plug sockets on the wall.

Иконостас)

I hope you don't mind me saying this but of all your videos this one is the one I have seen (like I am now) over and over again and again. I love watching you work while all the time knowing that this woodworking is not your day job and yet you are so good at it. I am finally starting my own Wall Hung Tool Cabinet some 6 years in the waiting and I'm going to use one of your joinery methods the butt-end dovetail Dado but mine will both be the proper length. lol lol lol lol. I have to say that the most pleasing part of your videos is the GREAT MUSIC. and of course, your skill at day job of commercial video and music talents show up big time in your shop videos. I still can't find the good music but I'm still looking for it, royalty-free of course.

💯👍🏻👍🏻👍🏻🍻✌🏻🇺🇲

Where is the little brass mallet from bud ? Great build love it and the editing 👌

Awesome bro, fabulous work... Am also a Carpenter from pakistan, I realy enjoy your video, your working teachnics OMG.... Carry on bro. Or in last May I know which wood or glue you guys use? because we use mostly lamination sheets, or nails here.

I just stubbed on your channel, great stuff! BTW, what is the card scraper in the saw kerf for?

hand tools in a cabient built with power tools ?

Looking for the fret saw you’re using, can’t decide which size to buy. Looks like the one you have is on the larger side. Worth it?

Ben, I have to laugh, I'm watching this video again and specifically for your panel dadoed dovetail end to the case frame or body. I'm close to finishing up two projects here and will begin my own (long-awaited) wall hung tool cabinet for my little garage woodworking shop and I'm going to include this method of jointing my intermediate panels both vertical and horizontal with this type of dado joint of yours design. But as I said I had to laugh because it just occurred to me why you had to cancel your subscription to that source of music you used. YOU SPENT ALL YOUR CASH ON FESTOOL Equipment!!! lol lol lol lol lol. The shop I worked for in France for over 12 years we had all kinds of Festool power tools and back then I didn't know how prestigious Festool was because we never knew the cost of them the company just gave them to us to use. But to this day I still can't stand the Festool drill motor and screw-guns. They are WAY TOO HEAVY. Still, this video has got to be the best Tool Cab video out there. Chow buddy

Very beautiful and inspiring! Could you tell me what type of Festool circular saw you used to make the dado? Thanks!

Nice build- but why not use decent wood?

Boa noite aqui do Brasil manda umas ferramentas dessa para mim. To começando agora é não tem grana para compra ferramentas boas assim.

How did you color your cabinet ? Just burn or ?...

PUT A GUARD ON THAT JOINTER/ PLANER!!!!

where did you get the catches from for locking the folding doors. Also in the uk.

All in pine?

Wow, amazing work! And the video is excellent.... but think it might be even better without the music soundtrack which takes away from enjoyment of just watching you working listening to the sounds in the shop. Unlike the other commenter, not suggesting that you speak at all... simply let us hear the sounds of the tools and the work you're doing without the music. There's so much going on in the visuals and with your excellent editing, it wouldn't be at all boring. Hey, it's just one guy's opinion but take a look at another channel, Hand Tool Rescue, to see what I mean. Maybe try posting one of your videos with the music soundtrack and the same video without and ask for comments which people like better. Good luck.

Do you have any plans for sale for this build?

Plans available?

What dividers are you using?

A ring and bracelet around a table saw? Not a good idea.

I can't be doing with the music it would be better if you could speak

Nice work mate .🏆👍😊..how many hours would you say it took give or take a yard ?🤣👍🏆