WarmFloor Pro - Insulated Beam and Block Flooring from Milbank Concrete Products

Подписаться 3,5 тыс.

Просмотров 1 млн

50% 1

WarmFloor Pro by Milbank Concrete Products is a cost effective alternative to quickly constructing a thermally insulated concrete ground floor over the industry leading competitors such as Jetfloor by Forterra or OS Thermal Floor by Cube6.
See more on our website: www.milbank.co...
Reduced initial construction costs and lower heating costs make WarmFloor Pro a compelling alternative to a standard beam and block floor.
WarmFloor Pro is suitable for almost any structure, but is most commonly used in housing, from single dwellings to complete housing developments.
Milbank WarmFloor Pro offers simple, cost effective, concrete insulated flooring to self-builders and construction professionals alike.
Are you looking for an insulated beam & block floor? Or perhaps just its standard concrete counterpart? If so, we would love to hear from you. You can contact us directly on estimating@milbank.co.uk or by phone at 01787 223931. Alternatively, visit our website: www.milbank.co.uk
Special thanks to Cadman Cranes for the specialist Compact Crawler Crane hire!
www.cadmancran...

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@tr2319 4 года назад

Oh my god the music. Talk about the products. Who the heck is your marketing lead. This is terrible.

@TheMilbankGroup 4 года назад

Hi TR, Thank you so much for taking the time to leave a comment with a constructive review, we are sorry that on this occasion you did not enjoy our music selection. Thanks again, Team Milbank

@owenyarnold4755 2 года назад

Does anyone know how the thermal performance of the insulation blocks compares to say 150mm PIR insulation that might normally be laid over a standard beam and block construction?

@alimomali9753 2 года назад

Suitable place for rats

@marksweeney2698 3 года назад

How about vermin control?

@michaelparke1459 3 года назад

We used to install this in our houses 30 years ago , until the rats eat through it!

@kledrcridle7972 4 года назад

And what about the land dirt that remains under the floor? I will have to put some small ventilators in order to change the air below? What will happen when a snake or mice start to enter beneath? I will have to ......feed them as pets in order not to chew my floor? Put concrete and make the floor on the concrete base

@mattybaddT.V 3 года назад

Just wasted 2:33 mins of my life

@samc5588 5 месяцев назад

Hi we are doing an installation of something very similar. What do you recommend we use to cut the top sheet ? It’s 150mm eps grey topsheet. Using a hand saw can get tiring and takes a lot of time if doing multiple floors.

@lesleywillis6177 6 месяцев назад

I don’t understand why the blocks fit inside the beams ( like block and beam) instead of butting up on top of the beams. This would provide insulation on top of the cold beam?

@JohnnyMotel99 5 месяцев назад

I have seen an example where the insulation was formed to cover the beam from the underside.

@marksweeney2698 3 года назад

Thanks Mike. Should have scoped comments first .

@dannymurphy1779 3 года назад

700K views - Impressive! Nice closure blocks too. Seen all sorts bodged into those ends, even beer cans!

@786otto 4 года назад

nice

@blazrunjic6531 4 года назад

This is nothing new, prefabricated beams and pieces to fill the void in between beams

@mustafadogan8249 4 года назад

@euvoce4644 3 года назад

Its concrete beam is reinforced or prestressed hardware

@vitaliibrisim9122 3 года назад

А почему не метр утеплителя, да че мелочиться то...даеш два метра. Маркетологи хреновы.

@olukayodesogeke3516 4 года назад

Can this be used for a second floor decking... Is this available internationally (West Africa

@TheMilbankGroup 4 года назад

Hi there. Unfortunately this is a ground floor solution only. We currently only supply to the UK. Thank you for the interest!

@yongyun652 4 года назад

😘😀😄😀😘😄😀😀😀😀😀😀😀😘😄😅😘😘😀😀😀😀😀😀😀😘😘😀😀😀😘😘😄😄😘😘😄😀😀😄😄😄😘😀😘😘😀😘😀😅😘😘😘😄😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😄😘😘😀😀😘😄😘😀😀😀😘😄😄😀😄😀😘😘😄😘😀😀😀😀😘😀😀😀😀😀😀😀😄😘😀😘😀😀😀😀😀😀😀😀😋😀😄😀😀😀😀😀😀😀😀😀😀😀😀😀😀😄😀😀😀😀😀😀😀😀😀😀😀😀😀😄😀😀😀😀😀😀😸😸😸😸😸💀💀😸😀😸😸💀😸☠😀😀😸😀😸☠😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😸😀😀😸😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀💀😸😸😸😸😀😸😸💀😸😸💀😸😸😀😸😀😀😀😀😸😀😀😀😸😀😀😀😸😀😀😀😸😀😀😀😀😀😸😀💀😀😀😀💀😸😀💀💀😀💀😸😀💀💀😸😀😀😀😸😀😀😀😀😀😀😀😀😀😀😀😄😀😀😀😀😀😀😀💀😸😸😀😀😀💀😸☠😸😀😸😀😸😸👺😸😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀

@ek9772 3 года назад

EPS = expanded polystyrene foam

@blazrunjic6531 4 года назад

In my country is called "Voljak" system

@MarkKelly-fm5vf Год назад

The same flooring system in Taylor Wimpey's new build homes but a different brand is SHOCKING for the vibration when the washing machine is on full spin also to mention even when walking through rooms you can see the movement in the cupboards search Google and you will see the UK homeowner reviews soon as you move in they don't care they say it's within regs

@thedude4632 4 года назад

Ya gotta love a disco builder

@ferretface8782 4 года назад

Everybody and their mother is peddling AirCrete nowadays. Different shapes, sizes, and made-up names... but still just AirCrete.

@TheMilbankGroup 4 года назад

Hi Ferret Face, Thanks for your comment. Just to clarify, WarmFloor Pro does not use AirCrete or anything similar. The panels are made from durable EPS (expanded polystyrene) and not cement. If you would like to find out more, feel free to visit our website. Thanks, Team Milbank.

@carlstoakes6240 4 года назад

How does the cost of this system stack up against a traditional beam and concrete block solution?

@TheMilbankGroup 4 года назад

Hi Carl, great question! More often than not, our WarmFloor Pro system is actually less expensive than it’s standard concrete beam & block counterpart. At the time of writing, based on a 50m² area with max centres, using 150mm beams, both Ex-Works costs from Milbank Concrete Products are as follows: - Beam and Block (7.3N medium density), including slips: £1,040 - WarmFloor Pro, including beams, EPS infill blocks, EPS top sheet (75mm) and concrete closure blocks: £997 In this example, WarmFloor Pro is ~4% lower than an equivalent beam and block floor, while typically providing a U-value of no worse than 0.19W/m²K along with the additional benefit of being slightly quicker and easier to install! I hope that helps, but please feel free to contact us directly if you would like more information. You can do so by visiting our website www.milbank.co.uk Thank you, MCP Team.

@l3rigo 4 года назад

@@TheMilbankGroup I am constructing my house in Belgium and I would like to use warmfloor pro instead of Hollow-core slab. But do you know a company who use your warmfloor ? Impossible to find it... thank you

@TheMilbankGroup 4 года назад

@@l3rigo Hi Brieuc. Thank you for the comment. Unfortunately, we are not aware of anyone outside of the UK using this system, but wish you all the best in you search to find something suitable. Team Milbank

@mitchdehotte 3 года назад

@@l3rigo Brieux better use rector rectosen , this product offer a better isolation overall and the strength is also better due to the collabroation of the beam in the concrete plate

@handle1196 3 года назад

@@TheMilbankGroup im in the uk about to start a block and beam floor on a 2 storey brick built house. Your comparison above has the sections between the beams and then the insulation sat on top and is £40 cheaper. But doing it in concrete blocks would still require pir sheets on top wouldnt it making concrete blocks a lot more expensive, or have i missed something?

@АндрейПастухов-л6и Год назад

И дальше что? По пенопласту ходить?

@hendrattno1936 4 года назад

Indonesia kantor telp brp

@TheMilbankGroup 4 года назад

Halo. Sayangnya kami hanya menyediakan produk kami di Inggris.

@РамильТатарин-о7з 4 года назад

@brianbassett4379 4 года назад

What about hydronic heating?

@TheMilbankGroup 4 года назад

Hi Brian, Great question and yes! Our WarmFloor Pro system is compatible with underfloor heating - plastic pegs can simply be pushed into the EPS panels to hold underfloor heating pipes in-situ. I hope this helps? Team Milbank

@brianbassett4379 4 года назад

Can you incorporate hydronic heating?

@TheMilbankGroup 4 года назад

@jamiecann2485 3 года назад

More like crap floor

@noraadrianadigiorno3463 4 года назад

Y si hay un incendio? La gente se suele quedar acostada en el suelo por recomendación para no aspirar monóxido de carbono.

@TheMilbankGroup 4 года назад

Hola Dra. Quím. Nora Di Giorno, gracias por tu pregunta! La breve respuesta es que nuestro sistema contiene un aditivo ignífugo para no presentar un peligro de incendio indebido cuando se instala correctamente. Suministramos WarmFloor Pro como solución térmica solo para plantas bajas. Luego, el piso debe terminarse con un acabado estructural de concreto aplicado sobre el producto. Si se produjera un incendio dentro del edificio, tendría que romper el revestimiento de hormigón antes de que alcanzara la lámina superior de EPS y los paneles de relleno, lo cual es poco probable. El único lugar donde está expuesto el EPS es en el vacío debajo del piso y el suelo, y aunque reconocemos que existe un pequeño riesgo de incendio en una subestructura, la probabilidad de que esta zona se encienda es extremadamente improbable. Sin embargo, en el improbable caso de que ocurriera un incendio en el vacío de la subestructura, el aditivo asegura que el producto se autoextinguirá tan pronto como se elimine la fuente del incendio. ¡Espero que esto ayude!

@noraadrianadigiorno3463 4 года назад

@@TheMilbankGroup Gracias por sacarme la duda . Están haciendo mi y quiero saber todo lo que pueda.

@sugiantoandfamily 3 года назад

👍🏻👍🏻👍🏻👍🏻

@johnbutterworth1369 3 года назад

3 mil

@ftruiemdmbkjg0typepscklg2 4 года назад

What is the max load ?

@ГалымжанИсполганов 4 года назад

Что за технология? Что за материалы?

@TheMilbankGroup 4 года назад

Привет Галымжан, спасибо за ваш комментарий. В этой системе используются панели EPS, пенополистирол, в сочетании с сборными железобетонными балками. Верхний лист EPS затем помещается сверху, после чего заливается бетонное покрытие для отделки. Надеюсь, это поможет.

@ГалымжанИсполганов 4 года назад

Все спасибо! Буду знать! А на межэтажное перекрытие можно использовать?

@mmkm9554 3 года назад

Bardzo ciekawe i mądre

@bubumic2971 4 года назад

That looks like if i step on it it goes to shit ...

@TheMilbankGroup 4 года назад

Hi Bubu, Thank you for taking the time to watch and leaving a comment. You are right, at this stage of the build the floor is not designed to be walked on. Once the EPS top sheet and concrete topping is applied the floor is completely structurally sound. Thanks, Team Milbank

@willstyles4988 4 года назад

slow down your text animation, had to pause to read

@TheMilbankGroup 4 года назад

Thank you for your feedback, we will note this for the next video!

@midgardlife 4 года назад

What about radon protection?

@connerrobinson4240 4 года назад

Better to remain silent and be thought a fool than to speak out and remove all doubt.

@euvoce4644 3 года назад

FACE WHAT WORLD YOU ARE

@goldenskeptic6309 4 года назад

Do you also supply foul pipe hangers for the beams? I have a steel reinforced ring beam footing that sits on piles, the ground under the beams might fall away abit, so can't put foul pipes on the ground, they have to be suspended.

@TheMilbankGroup 4 года назад

Unfortunately we do not and have not heard of anyone opting for that method due to prestressed floors ‘bouncing’ and therefore the pipes/joints moving. If possible, we would suggest calling a groundworker for their opinion. Thanks.

@goldenskeptic6309 4 года назад

@@TheMilbankGroup I never mentioned anything about the floor "bouncing" I'm talking about the ground under the beams dropping, or falling away abit, therfore if the foul pipes are on the ground and not suspended, they will sink with the ground under the beams, and you will get back falls in your pipes. By the way, I build houses for a living, and it is pretty much standard practice now.

@TheStressD 4 года назад

Can this system be used for home extensions?

@TheMilbankGroup 4 года назад

Hi there, Indeed it can! WarmFloor Pro is ideal for any ground floor home extension, providing fantastic thermal properties to keep energy costs to a minimum. Thanks

@TheStressD 4 года назад

@@TheMilbankGroup Thanks, can you add underfloor heating and screed over without the top sheet, or should the top sheet be applied first and then underfloor heating?

@TheMilbankGroup 4 года назад

@@TheStressD You can indeed! WarmFloor Pro is completely compatible with underfloor heating, the pipes are simply held in with plastic pegs that are inserted into the EPS TopSheet. The system does require the TopSheet in all scenarios, therefore for underfloor heating; - Place beams - Add EPS infill blocks - Place TopSheet - Place underfloor heat pipes and fix to TopSheet. - Lay structural concrete topping & reinforcement. Hope this helps!

@d8niel77 4 года назад

Check out lite deck less heavy equipment needed and panels can be made up to 53 feet long

@michaelschneider- 4 года назад

@d8niel77 .. Agreed. .. The Lite Forms deck product is worth checking into. .. www.liteform.com/litedeck-srs .. Either or companies deck product, when coupled with a hydronic heat system the flooring/deck becomes a flywheel of heat. .. The acoustic properties of an insulated concrete deck/floor are the best of the best. ..

@sinasadeghi6745 4 года назад

Hello, are the ingredients only EPS or are they mixed with concrete?

@TheMilbankGroup 4 года назад

Hello Sina. The infill panels are made from EPS only. The beams that support the panels are made from reinforced precast concrete. I hope this helps.

@sinasadeghi6745 4 года назад

thank you very much , EPS is usually white. Why is your product gray? I find it interesting.@@TheMilbankGroup

@luiz--edz8868 4 года назад

Muito Obrigado pela indicação da música. Muito Show essa música.

@archemahdi4586 4 года назад

Is this system fire-resistant?

@TheMilbankGroup 4 года назад

Hi Mahdi, thanks for your question! The brief answer is that our system does contain a fire-retardant additive so as not to present an undue fire hazard when installed correctly. We supply WarmFloor Pro as a thermal solution for ground floors only. The floor should then be finished with a structural concrete topping applied above the product. If a fire broke out within the building, it would have to breach the concrete topping before it would reach the EPS top sheet and infill panels, which is unlikely. The only place where the EPS is exposed is in the void below the floor and ground, and while we acknowledge there is a small risk of a sub-structure fire, the probability of this zone igniting is extremely unlikely. However, in the unlikely event that a fire did occur in the sub-structure void, the additive ensures that the product will self-extinguish as soon as the fire source is removed. I hope this helps!

@cristianmuscia6350 4 года назад

Dealer Italy ?

@TheMilbankGroup 4 года назад

Hi Cristian. Unfortunately we only manufacture and supply within the United Kingdom.

@cristianmuscia6350 4 года назад

The Milbank Group Order and substitution in Italy ?

@ClankyRochet 4 года назад

My house was build in the 50 and I can't even drill the holes to hang a curtain pole without using SDS drill. Houses these day are being build using cheap material but the prices aren't stays high.

@pedromorales5951 4 года назад

Love it. if you don't need no scaffoldings for the floors a plus . I would love to see how the project finishes at the end

@sprtplt 4 года назад

The answer to the question no one, ever, asked.

@ChampangeSuperNovaz 4 года назад

is noone going to talk about this Banger of a song playing in the background. gawd daym!

@dannymurphy1779 3 года назад

LOL - Choon!

@j.c187 3 года назад

I been in construction almost 30 years now and also watched a bunch of new videos for net zero homes. Out of I'd guess 100 or so videos this is the first one I have seen that safety is taken sierious. I just wanted to say thank you to the company doing the install for doing it right and doing it safe!!!! Fall protection while unloading a truck is never seen . I'm glad to see everyone wants to go home alive at the end of the day.

@mcgch46e80 Год назад

There has to be some limit to these overburdening safety policies; unloading a truck? Come on!

@Mg-wd6id 5 лет назад

What type of blocks are these

@TheMilbankGroup 5 лет назад

These are rigid insulation modules (EPS blocks) manufactured from lightweight closed-cell expanded polystyrene. If you would like to know more, there is loads of information on our website: www.milbank.co.uk/warmfloor-pro/

@mitchdehotte 3 года назад

Rector system rectosten is far way better ! Lol this product is a joke :)