Washing Machine not Filling with water. How to diagnose the problem & test valves pressure switche

Подписаться 135 тыс.

Просмотров 753 тыс.

50% 1

Tutorial: www.how-to-repair.com/help/was...
To buy water valves, go here: www.how-to-repair.com/washing-...
This tutorial is for when a washing machine will not fill with water but works OK on spin. If your machine does not fill at the start or stops in mid cycle with no water in the drum or it won’t rinse then there is normally a problem with the water intake system. If you've come to this article because your washer won’t do anything then you might want to look this article on door locks.
Please remember to subscribe to our channel
ru-vid.com?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
RU-vid. / apart4u
Facebook. / how.to.repair.appliances

Хобби

Опубликовано:

9 мар 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@How-to-repair 2 года назад

We now have Live Q@A's weekly on our live Show , see our home page ru-vid.com for next date

@petewilson2700 3 года назад

Brilliant. Clear, concise and easily understood. Bought a cheap multimeter and used it to prove one of the solenoids was faulty. Bought a cheap, new and genuine part of ebay, fitted it as per the video. Back in business and no service engineer charges. Thanks again, fantastic.

@alanwansboro5444 5 лет назад

Followed this video to the letter and it walked perfectly. Clear, concise and saved me a bunch. Thank you for posting.

@rosa121070 7 лет назад

Struggling with my washer for 3 days and BINGO i have a kinked valve unfrickin beleivable! Thanks a bunch

@bumptybump 7 лет назад

Very helpful and pointed me in the right direction. Here's a warning for anyone moving a washing machine - don't transport it on its back. I did this today and accidentally severed all the wiring from the intake valves to the motherboard. Consequently, although the machine appeared to perform normally other than there was no water getting in. I only noticed this after following all Paul's tip to diagnose the water issue. Another small point is that I couldn't get connectivity across the terminals of the intake valves but was fairly sure they were ok as I checked my old Indesit solenoids too and they were exactly the same. Perhaps something peculiar to Indesit machines? They are working now the wiring is connected so not really sure why I couldn't get a circuit.

@alextowler1336 8 лет назад

Great video! Thank you so much you helped me avoid an awkward conversation with the seller when I realised I had a kink in the hose!

@tommyv711 Год назад

You saved my machine. There was no water flowing in and I did check the incoming water filter and it was full of sand. Now my machine is working like new. Thanks a lot!!!

@paulgibbons2320 2 года назад

Hi, your clip on changing the carbon contacts in a Beko has just saved my washer machine. For this reason I will send you some money for a beer. Top job 👍 thanks.

@bhaskarshastry725 2 года назад

Thank you. Helped to solve my IFB washing machine problem.

@gustavoechenique6907 8 лет назад

Great! Thanks from Argentina!

@akcharlic Год назад

U fixed my machine in two minutes! God bless u!

@How-to-repair Год назад

Anna Kovalska I would love you to leave your opinion on our poll about manufacturers building in obsolescence to appliances. ru-vid.comUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@vamphunt666 6 месяцев назад

Fantastic my TV works fine now.

@EamonnKee 11 месяцев назад

Exvellent video. To the point. Well done! Thank you!

@billburr1347 7 лет назад

Thanks you are a saviour!!

@nothingman3756 6 лет назад

Great video. Very informative and well presented.

@user-gs3lu8xu6c 3 года назад

Thank You . This video has really helped

@hendrickyee522 2 года назад

Great tutorial video! I follow the first protocol step of troubleshooting. A clogged filter screen at the cold water inlet right behind the old washer. Bingo! The washer now has water delivery and functioning normal again.

@How-to-repair 2 года назад

Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@justanothernoobe Год назад

Most importantly ... is that a Fluke 77? I have one from around 1994 :) :) :) All the "experts" kept telling me "it's old - you need to replace it" ... I just replaced the battery and hey presto! All fixed. Current generation have no idea how to fix things other than to ask Mum and Dad to sort it out 🤣🤣🤣🤣

@nikolayrolik 3 года назад

Thank you, mister!

@slaveatif 7 лет назад

Thanks for the great video

@rahulexpt 7 лет назад

excellent details

@hansfreekit 2 года назад

Thank you - I had a go - I think the air pressure tube was either blocked or kinked - works great now. Cheers!

@How-to-repair 2 года назад

I'm glad I was able to help please remember to subscribe to the channel as that's what keeps us going

@harveysmith100 4 года назад

Excellent description

@How-to-repair 4 года назад

Iam Glad we could help you. If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@blackpaton716 4 года назад

Cheers for video . I just moved into my new flat and I thought the washing machine was faulty. Just a kinked hose pipe. Many Thanks.

@How-to-repair 4 года назад

Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@emersoncampbell2661 Год назад

Thanks for the explanation,it was a great help.

@How-to-repair Год назад

You're welcome! Thank you for leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@Arcturian1111 4 года назад

Clean both of the screens in each inlet inside the washer hose inlet. There are two screens for each cold and hot on the washer.. One is inside the machine inlet that you can't see, and one outside the machine that you can barely see, it has a tab you pull out. Use a flashlight and look inside the inlet tube or nipple that's threaded, after you take the first screen off you'll see it.. My inside screen was clogged bad, so I just took it out with a flathead screwdriver, and eliminated it totally. Both hoses were good, I saved some money, didn't need new hoses... All fixed.

@senthilshunmugam685 7 лет назад

thanks for videos

@vanyangganda2772 5 лет назад

Thanks sir !

@khalickhoosain2824 Год назад

THANK YOU very much boss keep up the good work brother

@How-to-repair Год назад

@khalickhoosain2824 please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍

@MrAcresofhope1 7 лет назад

Fisher and Paykel Model WH60F60WV1 Starts fills with water pauses for 5-10 mins then pumps out Could it be the pressure valve not putting in enough water

@gxsilenthunter1 6 лет назад

Thanks a ton man! Our washing machine stopped pumping water in it so i checked your video and tested everything and I think I'm up to something. Its the small red pressure switch, I think. After blowing in it it clicks but when i attached it and tried the washing machine again. I noticed it clicks really fast after which the water stops flowing in (it switches in the inlet coils to stop water flowing). So then i removed the air tube from it and tried it again. Basically there can never be pressure on it that way and the water kepts flowing. Now the big question. Should I replace the pressure switch or is there still something different that can cause the switch to click?

@stevo091 7 лет назад

Hi good video review. My washing machine goes on a cycle , but clothes come out damp. Will check valves. Cheers

@joyngaru 3 года назад

Check the filter

@jonathonjubb6626 2 года назад

This is brilliant! Thank you..

@How-to-repair 2 года назад

thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you

@ndiforgeorgetala4470 Год назад

Video was good and educative

@How-to-repair Год назад

Glad it was helpful! Thank you for leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@janicerost3134 10 месяцев назад

Hi Paul, what if you have hot water filling the drum and nothing coming out of the cold water? Thoughts?

@vaphanith9892 7 лет назад

I just bought a washing machine, LG front loader.The water system that I installed , no problem because I checked the hose, the water speed is ok. But when I started washing the indecator showed that the water is not enough. How can I repare this?

@johnbrewster8519 8 лет назад

hi sir, i have a indisit and the pump keeps running without water in the machine, can you help me with some advice, kindly regards John

@gracemk3403 2 года назад

My Beko Washer was filling and draining simultaneously! I pulled the drain hose a little so that it is not too deep into the machine (to avoid siphoning) then raised the hose a bit coz i was draining on the bathroom floor and it worked ( literally hang it on a bucke)t😜!!!

@nightmareinaction629 6 лет назад

There is no power hears relay click but wires are fine valves are good swapped and also tried the pressure switch what could it be

@scottgary3008 4 года назад

Washing machine would stop mid cycle when on cold water cycle. I changed the cold water inlet valve, put everything back together and it worked fine for about 6-7 months. Then the wife tells me the machine shuts off mid cycle when she uses hot water. I change the hot water inlet valve, put it back together and it does the same thing "Starts then stops mid cycle. I had partially kinked the hot water hose when I changed the cold water valve and it eventually collapsed on itself causing the problem. Thanks to the advise in this video the machine is working like new again!!

@How-to-repair 4 года назад

when you have a question please use our contact us page for 24 hour response www.how-to-repair.com/help/contact-us/   Paul CharmburyAppliances Engineer    

@titorodriguez6986 5 лет назад

good video

@bineshchauhan8713 5 лет назад

thank you very much sir. I am by binesh from (ahmedabad) gujarat, india . please tell me 1 In which techanic you wright with sipiking in Vidio & 2 Can you send me ifb elina frontload washing machine wiring diagram

@Dusty7460 2 года назад

Absolutely brilliant. Thank you kind sir. A small question is any chance to purchase and replace the filter you have shown at 5:53? Thank you.

@How-to-repair 2 года назад

send us full model number at website and we can find it for you.Thanks We now have Live Q@A's weekly on our live Show , see our home page ru-vid.com for the next date

@StickyWhiteSubstanc3 8 лет назад

Not sure if this is washer related but basically the water in my house runs fine except for the cold water from the lever tap in the kitchen. I believe the washer is also connected to the wiring and the tap literally dribbles out cold water. Because of this the washing machine is unable to fill up with water. What could the problem be here?

@juansanchez-kb4ij 8 лет назад

mine is a Kenmore front load washer that it will get water in to the machine only when manually put it on spin cycle and that will work fine or rinse and spin but when I switch to a normal wash won't get water in and the washer suddenly start washing with out water after 2 it will drop down washing time from 54 min to like 2 min and no water at all any suggestions?

@Ohkeh640 4 года назад

What about if the washing machine doesn’t fill Up with enough water ? My sinks won’t drain the water down fast And my dishwasher leaves water behind in the machine Also not enough shower pressure.

@colonialroofingofnorthcaro441 2 года назад

I'm in USA and my Frigidaire upright washing machine, starts to fill with water, maybe 10 to 20 secs and stops, and that's it, want go any further, don't shut off or anything, I have to shut it off to open the door, any help would be greatly appreciated, thank you and thanks for the very informative videos

@yazs.m9838 4 года назад

My drainage is blocked (bath water wont go down) now my washing machine won't fill up with water, is this because of the bath? Are they linked? Thanks

@madyottoyotto3055 8 месяцев назад

Any ideas on the reason a water valve would turn on and off repeatedly and give read out on the lcd

@zahirkamel924 4 года назад

Please how to calibrate analog pressure

@candy_cane7804 Год назад

Yep my plumber who was fixing the tap kinked my hose of washing machine lol thank you for this video

@How-to-repair Год назад

@candy_cane7804 please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍

@josephmumbakawimbe2122 7 лет назад

Our Samsung Nano is not filling up with sufficient water for the wash cycle. What could be wrong? Joe in Johnannesbug

@RekhaSharma-yq7es 7 лет назад

HI PLZ CONFROM WHAT PROBLEM IN SAMSUNG FRONT LOAD WASHING NOT CALLECT WATER

@ASIFNASAR 7 лет назад

My washing machine doesn't work on ANY wash cycle. It's a Hotpoint and has just flashed a F1 error and said it is blocked. I just checked the filter on the bottom of the washing machine and just water came out, nothing else stuck there. I'm going to have a look at the filter on the back and pull it out like you just showed and hope that is it. Would appreciate any help. Thanks

@faizankhankhan7265 5 лет назад

Same same problam Fi error

@MattMediaMatt 5 лет назад

I have an E7

@Collegework88 7 лет назад

I'm hoping you can help me with this problem. I have a samsung top load washer (wa40j3000aw) and the hot water doesn't work, I have tested the solenoid and the water lines all work fine. My problem is the connector, the cold water line is getting 120 volts (american standard) but the extra rinse and hot water only get 40 volts. So I know its a problem with the wiring, I just don't know what to replace to fix that problem?

@govindrajan6476 6 лет назад

Hi, any one can get me the user manual, operating instruction of WMC 61013 ER - Westpoint front loading washing machine.

@stephensiaw9281 Год назад

I have indesit washing machine model LB2006TRF. It will fill water just for a few second to a minute then stop but the machine will still be washing for some minutes until you see h20 error code. I checked with my multi meter and saw that when the water stops flowing, power supply to the inlet valve will totally be cut off which stops the water flowing. Now could it be the pressure sensor faulty?The water hose isn't blocked as well. Could it again be the hose to the pressure sensor or what? Please advise me. Thanks

@friedchicken1 3 года назад

is it possible i have double problem? #1 both my electro magnets are blown up #2 only one of the 2 receives electricity

@Sane_Mania Год назад

A thingy was closed...I opened it...it worked...no panic :D

@How-to-repair Год назад

Glad it was helpful! Thank you for leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@MMOEarth 6 лет назад

Great video! I do have one technical question. What happens if you try to do a cycle without any water supply, say there is temporary water shutdown? Obviously the valves will open, buzzing noise from the electricity that activates the coil will be heard, the machine will try to pull water, but there won't be any causing the machine to stop and show error. My question is, how much damage (if any) can this cause to the machine? Asking for technical knowledge. Thanks!

@How-to-repair 6 лет назад

On old machines it would just stop on newer it will come up with error code. but you can't do any damage

@chrisbarnes6623 7 лет назад

I need help ,my new Samsung washing machine when washing turns or spin less than 3seconds to wash every 1minute compared to the traditional machine that washes and spin longer. What should I do now!soo much dirt in the clothes after wash

@bukkya50 8 лет назад

@MPM_News 24 дня назад

Hello I have any E17 error code and my washing machine digital dial freezes in the diagnostic mode. Can do spin or anything

@mds4514 2 года назад

Stuggling with my washer for a day. After checking the pipes, I got ready to start taking things apart... And then realised I'd accidentally left the timer/delay on.

@How-to-repair 2 года назад

glad we could help

@duhbdeep 5 месяцев назад

Thanks

@How-to-repair 3 месяца назад

Thank you very much indeed for supporting our channel. Your general donation really does help. I'm glad this video assisted you in repairing your appliance As an ageing appliance engineer, my expertise lies more in the domain of domestic devices than in IT, resulting in a limited understanding of RU-vid video optimisation. Consequently, my videos might not reach their full potential due to these IT constraints. Nevertheless, they offer invaluable aid to those who encounter them. Your support in sharing our channel on social media would be immensely valued. By disseminating our content, you enhance our visibility and contribute towards addressing the pressing matter of appliance wastage. In turn, you play a role in averting numerous machines from facing an untimely end in the heavenly scrapheap of appliances. Thanks 👍

@lavanya.j1225 5 лет назад

My washing machine IFB not washing clothes always indicate tap but water didn't come what can do sir already water will be full in water tank

@danos5181 5 лет назад

My Beko machine stops after work seconds of water filling and then the whole cycle is cancelled after another two to three minutes. The spin cycle does work though. What to do? After trying to fix broken faucet I took out the water main out and then tried to reinsert it with the water on despite all the wet spray. Could it be that the water spray got all the electric valves wet and they need to dry off?

@kena2051 4 года назад

My Bosch washer dryer has a separate circuit board clipped to the valve assembly, what is this for? Also three out of four valves gave a reading of 5 ma while the fourth read 4 ma?

@sammy-pp1gl 7 лет назад

Hi I have a problem with my washing machine, all mechanism works well , but no water flow in , please help me with step by step to diagnose the problem ,,, tks

@barrydowd2977 3 года назад

hoover machine 9kg e03 error jnbloked coins fitted new pump cycle starts nog much water but e03 again i set to drain only filled 2l in tank it stop neaf end of drain e03 any ideas

@avgtril 9 месяцев назад

Does anyone know what the smallish circuit board (whith one connector) attached by two plastic lugs underneath of the triple inlet valve on AEG washer-dryer is for?

@How-to-repair 9 месяцев назад

Are you meaning a separate circuit board not attached to the water valve in anyway because sometimes the manufacturers have circuit boards on the water valve

@ahmedwaheed8833 8 лет назад

dear sir i have LG top loading T1232AFFSP5 washing machine i want to take signal from the washing machine to electric contactor to operate water electric motor automatic . in my old machine i take the volt on the inlet valve and connect it to the contactor which control the water pump when the valve open the water pump on and vise virsa . so now iam afraid from the new machine because it has electric board not analog like before also now i have 4 inlet valves so i have 4 different signal i have to manage . do you have any ideas please help .regards

@ethanisles4098 6 лет назад

Hi the problem with my aeg front loader is the water is going straight to the drainage and spilling out the filter on the bottom when you put it on any cycle. It’s bypassing the machine and going straight to drain

@ethanisles4098 6 лет назад

Please help me

@gracemk3403 2 года назад

@@ethanisles4098 I have the same experience, I followed this advise and it worked!! "Answer: Your washer DRAIN HOSE is causing a siphoning condition. Your washing machine drain hose is pushed way too far into the stand pipe in the wall. There needs to be an air gap and by having the drain pipe pushed too far there is no air gap. This creates a vacuum or siphoning affect and the water is pulled out of the washer as it fills with water. What you need to do is pull the drain hose out of the stand pipe and put it back in making sure it is not in the wall too far or too deep. There needs to be a bend at the apex of the drain hose. It needs to be above the height of the wash tub. Once you have the drain pipe or hose in the exact position you need it to be in to not cause siphoning, tie the drain hose to the water fill hoses with a plastic zip tie so it can’t fall back down deep or pull out".

@racelsiscon7087 5 лет назад

how can solve waching machine don't dry

@swossek3563 6 лет назад

One year old samsung with a bad cold water relay. Pipes were flawless. Hot water filter was disgusting, never even knew that was a thing until this happened.

@tehseen 7 месяцев назад

Hi My whirlpool frontload machine is not taking main wash water .its only taking prewash water. Please advise. Kind regards. Tehseen Pakistan

@fradrake11 4 года назад

My bush washing machine is not filling with water reading E02 any suggestions?

@How-to-repair 4 года назад

you can get personal help free contact us at facebook.com/how.to.repair.appliances/ glad i could help Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rFyGAHVFUW8.html&t facebook.com/how.to.repair.appliances/ Stay safe

@kevinconnolly5880 8 лет назад

Hi,I have a Hoover optima WMH147 DF. The problem that I have is that the machine is not filling, no water flows at all. I've checked the water pressure, checked for kinks in the hose, checked the filter in the inlet, then eventually changed the valves / solenoids all of which has not remedied the problem. I've checked with a very basic voltage tester that the solenoids are getting electricity, and they are. The machine will run through a spin cycle with no problem but will not do a wash because of the above fault. I'm now thinking of changing the pressure switch, is there any point? and after that I'm buying a new machine. Any advice would be most welcome.

@christineaustin1397 8 лет назад

+kevin connolly Hi, I've got the same machine and have already had to replace the circuit board. I now have the same problem as you. Have you managed to get it sorted? Your advice would be most welcome. Thank you.

@kevinconnolly5880 8 лет назад

+Christine Austin Hi , sorry I have no advice for you. I eventually give up and bought a new machine, extremely annoying! I tested the pressure switch and found no fault. concluded that it must be the board and at that point give up. worst machine I've ever had.

@How-to-repair 8 лет назад

+Christine Austin check wiring on the back of machine going to the water valve i have see a lot worn where the concrete has touched the wiring

@podandrod 2 года назад

Can scale clog up the dispenser

@How-to-repair 2 года назад

Yes scale can block the inlet jets this is a video that I'll be making shortly

@mitchconnerandsometimesjlotoo 2 года назад

All good. It does a rinse cycle only. So strange.

@How-to-repair 2 года назад

Glad it helped Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@senorasheikh8018 2 года назад

What is this problem if washing machine loads and unloads water just after 2 circle ?

@justmadeit2 3 месяца назад

Does anyone know how to adjust the water levels on the Bosch type in this video ? I have that and would like to alter it to increase water levels. Is there a way of doing it on this ?

@How-to-repair 3 месяца назад

The only way you can do this is adjust the settings on the pressure switch if it is a mechanical type if it is not, then you would not be able to do it. It might be possible to change the pressure bowl to a different size, and this would automatically adjust the amount of pressure going to the pressure switch not really practical though

@justmadeit2 3 месяца назад

@@How-to-repair I was told a longer pipe to the drum could possibly help, so ive ordered one to try. Is the pressure bowl the part at the bottom of the drum that connects to the hose?

@How-to-repair 3 месяца назад

Yes, it's the clear bowl that attaches to the hose or drum

@justmadeit2 3 месяца назад

@@How-to-repair Id actually give it a go but id have to find something with the same 5mm diameter connector of the hose. Not sure where id find a bowl with connectors like that ??

@manueloliveira1000 9 лет назад

E possivel ter este video com traducao em portugues

@stephensnell5707 Год назад

No it is only availible in English

@vgvg8246 4 года назад

water flows to the pre--wash detergent drawer, but not the main detergent drawer, then after 1min, it shows E10 error. My Electrolux front load washer is less than 1 month old.😣

@sabrinafurley3092 4 года назад

vg vg hi did you find he problem I have same thing going on right now

@vgvg8246 4 года назад

@@sabrinafurley3092 Hi, I contacted a non-Electrolux mechanic, he did a thorough test and concluded that the valve needs to be replaced. Since my machine is still under warranty, I waited for Electrolux's mechanic to fix it. Strangely, he didn't even need to "open up " the machine to replace the valve. He just pressed some buttons on the panel to "reset" the system, and it started working again!

@MrBaladaum 4 года назад

That multimeter has seen things that you people wouldn't believe

@gregvillanueva8356 4 года назад

Sir i repair automatic washing machine NATIONAL from japan.the problem is not filling water.i already check the water valve.water valve is ok and i replace already the pressure water level and then still not filling the water.thanks

@How-to-repair 4 года назад

have you checked if valve is getting voltage? if not might be bad wire or pcb, also check float chamber Have a great xmas and new year Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@gregvillanueva8356 4 года назад

@@How-to-repair sir thank you very much.yeeeyyyy sir today the problem is solved.same to you sir have a great xmass and advance happy new year.

@bradrichards6851 2 года назад

Also check if the problem is the Bosche AQUASECURE INLET HOSE

@How-to-repair 2 года назад

I have seen a few of these fail in the past please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@israshdefat4arch 6 лет назад

Hi my washing machine work but when it reach 39 minutes its stop and water stop fill in the machine. This problem is with all programe in the machine Although on 39 minutes its stop on 24 minutes Can you help me please

@How-to-repair 6 лет назад

check pump and filter www.how-to-repair.com/help/repair-guides/washing-machines/?s=blocked+pump Iam Glad we could help you Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@tonyclarke9269 Год назад

I had a problem with water not draining so took the pipes off near the drum / pressure valve and found a blockage there, put it all back together but now it won’t fill up at all , just a humming noise , the water is flowing to it fine and the valve filters are clean , any ideas ??

@How-to-repair Год назад

if you are hearing a humming noise this is the water valve working check water supply @tonyclarke9269 this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@dskeenley 7 лет назад

At first I had an F20 error. I found a sock in the bottom drain. Yea, fixed! NOT SO. Now the water will not enter the machine when turned on? First I could not get rid of the water, now I can't get it in! HELP!

@ZakDinero 7 лет назад

dskeenley did you mange to fix that, excalty same problem

@BryanFlores775WW 4 года назад

Can anyone help me my washer spin but doesn’t throw water any help plzz

@How-to-repair 4 года назад

Can you do us a favour and please share this video on your timeline. This will help other people who can’t get engineers out to help them. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rFyGAHVFUW8.html&t facebook.com/how.to.repair.appliances/ Stay safe

@richardkotey4177 Год назад

When you put it on it display but don’t do anything

@dominicvaz2148 3 года назад

My problem is water goes out

@richardkotey4177 Год назад

Pls I have problem with my washing machines

@NEVsPrincess 3 года назад

Water not coming in input tsp was off 😒

@richardkotey4177 Год назад

It doesn’t take water inside nor wash

@earlmccain7094 Год назад

There aren't 230 volts across the water inlet valves. You surely meant 120 volts.

@How-to-repair Год назад

no we are in uk that volage is usa Thank you For leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍