Watch BEFORE you PULL -ANY Polaris Clutch Rebuild - Belt Replacement Primary Tool 

This is got to be the best video of ever seen on pulling clutches I thought it was a bigger job than that you did them both in like 5 minutes great video thanks bro

I'm in the process of replacing the rear swing arm bushings and needed to remove both clutches to access the left side bushing bolts. This video was a great help not only showing how to remove the primary clutch but most importantly, letting me know I needed to purchase a clutch puller before starting the job. Thank you greatly for creating this video, it was extremely helpful!

Spot on Direct and to the points. Excellent

Your video was incredibly helpful! My bf cries when the clutch finally came off. Thank you

Awesome info! Your videos are always so helpful man! I’m working on my Mini pinzgauer 6x6 project today and I was trying to figure out how to remove the secondary pulley.

special tool you are selling is high got the same thing from amazon for $15

My special tool is put the rig on it's side pull out the bolt fill with tranny fluid place a long bolt in with a bunch of thread tape tighten and walla comes right off... hydraulic pressure

Hey mate I have been a long time subscriber, from Australia Absolutely love your detailed explanations not to many atv gurus in my area and if there is any, they won’t give advice as good as you ( as they want people like me to fail so they can get a job out of us ) I need to talk to you please I’m after some parts which I have been struggling to attain and a little advice- I literally have 7 project quad bikes😂only doing them one by one Or one big project with one straight forward project just incase I’m ever waiting on parts, to keep things as productive as possible Love your work again god bless you Please I’m waiting to hear from you- if you can tag or msg me directly or something would be great- Big fan! You deserve all the likes and subscriptions all are well deserved

I k ow I'm 5 years late but What is that back clutch wont come off? Its reallllllly on there. Any tips?

the belt was still really loose. Is there a way to tighten the belt,Its in very good shape,I' m not replacing it...

Thanks very helpful

What do you torque a 2000 Polaris Sportsman 500 primary clutch Back down to

Excellent video!!!

Great videos! Send me a link for the primary puller. Thanks

Hey Gr8 video with excellent communication! I have a 2003 700 sportsman (5700 miles 1 owner) which is creeping when starting. I pulled cover and belt was shot. I then installed a new Kimpex belt hoping this would fix the creep. Not! The new Kimpex belt looked quite a bit different-in design but just figured that a new belt should look different. I had one heck of time rolling belt on but it finally did go. Anyway it’s still creeping. Could the belt be to tight? Wrong belt? Clutch need rebuilt? Thank You

1st Awesome vid 2nd will need special tool to remove prim clutch, and 3rd where is your vid on rebuilding prim clutch, and will also need parts for that? it did not load up after this vid! I have a 2002 500 sportsman HO it want stop pulling when at ideal so im guessing it needs to be rebuilt? or can you take apart and clean? It has been sitting up awhile, never submerge under water. Thx for any help. Dwayne

I have a 2000 Polaris Trailblazer 250. Belt keeps flipping over on the Clutches and it kills the motor while I'm going down the road. I have a brand new belt and secondary clutch. Any idea what is causing this?

I have a 2008 polaris sportsman 800 4x4 efi automatic and my problem is I have to turn it off to change gears it idles fine no creeping what do u think the problem is

How would I know that the clutches are bad? Mine making noise form the clutch area, not sure if it’s just the belt or the clutches as well?

Can I ask the torque spec for an 01 sportsman 500? Both drive and secondary clutch bolts? Thanks and great vids

Are you supposed to have some movement in ur primary clutch I can push on with very little pressure and it moves back

i am doing a motorcycle engine in a polaris frame do i need to have a frount differental and if so how do i hook it up?

What's all that stuff falling out of the secondary clutch @7:57?

Can you please share the link to your video on rebuilding the primary clutch on a 1998 sportsman 500 or like model.clutch rebuild? Thanks in advance

Looking for both clutches for a 1991 Polaris 350L ATV. Any leads?

Great job, thanks.

Hello sir! I have the same year and model four wheeler. Last week was taking it up a hill and what sounded like something in engine or transmision broke(awful metal on metal sound for just a moment) . will not go into gear but sounds like it is coming from behind the main clutch. also sounds strange when you attempt to pull the pull start. Any information would be helpful! Thank you

I have a 99 sportsman 500. One of the rear axles wobbles when you turn it right at the diff housing. Do I have to remove the transmission to fix it?

Do you have a video on the Polaris secondary clutch in this video. Seemed ours sticking open randomly. You seem to know what your saying.

I put mine back together and the pulleys are out of alignment, help ! 😢

Question, our used quad has a seal leaking on the primary clutch, we pushed it back into place an it comes out again is it missing a washer? that would hold it in or is this its way of saying it needs a new one. Thanks

just recently purchased a 2001 Polaris sportsman 500 w/ebs. replaced the dr. belt with a dayco hpx 2204 belt. Blew out the old dust from the clutches. Now its difficult to shift into neutral. When I shift it seems to want to kill the engine. Just seems to want to shift from forward gears to reverse. Wont go to neutral. I put the old belt back on . What gives?

Need some parts for a 2003 Polaris sportsman .any advice? Mostly plastic body parts

What do you tighten that primary clutch Back Down to

Excellent video... I have a 2003 Polaris Sportsman 600 Twin. I have no problems switching through the gears but once I switch into HIGH gear, it will make a grinding noise and not want to move. It will move but I don't press it. I pulled the clutch cover off and noticed right away debris inside. The belt is perfect as I even changed it thinking it was the issue. When I manually spin the secondary clutch, it sounds like debris are floating inside. Any advice would be so much appreciated. Thank you, Blake

Torque spec for 2002 polaris sportsman 700?

2000 Polaris xplorer 400 both clutches torque please, and will your tool work for the xplorer?

So I’ve got a 90 trailboss been fixin, found a chip in the primary clutch on the outside edge. Can it be fixed with a weld?

Thank you for the great video it saved me a ton of work. Took my 2000 trail off out to the desert yesterday and lost almost all power even though the engine was running fine. Barely had enough power to get up the ramps into the truck. Back at my garage using your video as a guide I removed the clutch cover and about 12 ounces of black oil poured onto the ground. Basically my clutch was getting an oil bath. I know the oil came from the vent up above I just Don’t know why. I Did an oil change before this ride, possibly I overfilled the crank case or the oil was too cool when I filled it, I don’t know??

How do you tighten the belt.

Where should I go to get a clutch puller for a Polaris 330 magnum 4x4?

I have a 2014 Polaris sportsman 570 that is out of time there is a V ingraved on the flywheel that is supposed to line up with the cam chain sprockets but every time we tighten the cam chain tensioner it will jump a chain link and i was reading and people were saying that they had the same problem but they found out that a pin on the flywheel had sheared off and if it sheared off it would jump out of time but we don't have all the tools to take the flywheel of and the motor apart what are your thoughts on this

I have a polaris 500 that starts on choke then runs for few minutes with clutch off but dies when I throttle top any advise .... its driving me nuts I rebuilt carb put new filters on .. im stumped

I have a 96 Polaris Magnum 2wheel drive and it just recently started making a hell of a noise when in reverse a loud grinding noise. If I'm on it or hold it by rack and hit throttle it will do it or when I let off the throttle. It's also hard to get into reverse since this has started. Any ideas?

Is the belt and primary clutch suppose to spin when in Neutral??

My secondary has a noticeable wobble.. Time to rebuild???

I have a 97 magnum 425 and I think the belt or clutch is rubbing on rhe clutch cover

Wtf ..do you do if secondary pulley does NOT just slide off ?

Ig the 570 is a difrent clutch cause the puller doesn’t thread on to it

Secondary clutch will not come off 2014 800 Polaris

man id buy parts from ya if i could get a response on here or ebay.

Secondary clutch doesn't have the bolt on my 1999 Polaris I just bought. Should there be one? pic20.picturetrail.com/VOL1462/13616456/24858991/414440182.jpg

1st Awesome vid 2nd will need special tool to remove prim clutch, and 3rd where is your vid on rebuilding prim clutch, and will also need parts for that? it did not load up after this vid! I have a 2002 500 sportsman HO it want stop pulling when at ideal so im guessing it needs to be rebuilt? or can you take apart and clean? It has been sitting up awhile, never submerge under water. Thx for any help. Dwayne