Wattle on the ax handle. Wood carving - woodcarving-ax handle on the axe 

Hello, Friend!!! In this video, I decided to show how I make a braid on the ax handle. The story is simple I take the ax handle, align it on all sides with a handy tool, get a blank for homemade work, this time I decided to make my own wood carving-a wicker on the handle of the ax handle for my axe. I suggest You look at what came out of it. I will make two drawings on this ax handle, and I will post them in two videos on my channel. If you are interested in how I did the axe myself, then I will leave the link in the description just below...
👋 My / my Yandex Zen 👉 zen.yandex.ru/id/5ff9a7a05981...
👋 My / my Yandex. Efir 👉 yandex.ru/efir/?stream_active...
👋 My / my instagram 👉 / ​​
👋 My / my TikTok 👉 www.tiktok.com/@mihailkupec/​​
Dear friends, if you decide to repeat what you saw. Do Not Forget-follow the Safety Instructions. Gloves, mask, glasses, etc.
If there is an opportunity to support my efforts, I will be very grateful!!!
Support/Support - www.donationalerts.com/r/miha...
00:00 Start wood carving wicker
00:37 Preparation of the site on the ax handle for carving
01:47 Marking for wicker thread
02:40 Drawing the outline of the drawing for the thread
03:18 Preparation of the product for carving the pattern
04:20 I start to cut the braid on the drawn contour
06:26 I clean up the irregularities on the wicker
06:48 I sand the finished pattern on the ax handle with sandpaper
07:54 Show the finished result of my homemade work
08:51 End Screen Saver
In the next video, I'm going to make a second drawing... THANK YOU!

Хобби