Wax Carving | Making a Leaf Pendant

Подписаться 13 тыс.

Просмотров 29 тыс.

50% 1

In this video, I show my process for carving a leaf out of wax. This piece will later be cast in metal using the lost wax casting process. I'm using hard green jewelry carving wax for this model and odorless mineral spirits to polish the finished carving.
Timecodes:
0:00 - Intro
1:27 - Carving the Leaf
4:20 - Adding the Wax Bail
7:27 - Making the Leaf Vanes
9:43 - Polishing
10:21 - Finished Leaf Carving
Tools and materials used:
Freeman Carving Wax Block, Dark Green - amzn.to/3qK94u6
Stainless Steel Wax Carvers Set - amzn.to/37CIKKU
WAX Carving PEN Super Max - amzn.to/3aG5Pyg
Tungsten Carbide Rotary Burr Set - amzn.to/3pEDcpv
Follow me on Instagram and Facebook to see behind the scenes on my work!
gracenotefo...
/ gracenoteforge
********************************************************
Video Gear Used:
PANASONIC LUMIX LX10 - amzn.to/395hx1O
TARION Y5D Autodolly Electric Slider - amzn.to/36SvWNj
LED Video Light - amzn.to/2RXmP9X
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Развлечения

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@charlotterodgers8561 2 года назад

I lost it when I saw the Q tip in the flex shaft lol. That's such a smart idea - stealing it

@GraceNoteForge 2 года назад

I got that tip from someone on Instagram (I wish I could remember who) but I thought the same thing lol 😁

@Countrycharm17 2 года назад

Great video! Love the whole style and music. I was completely entranced in your work. Thanks!

@GraceNoteForge 2 года назад

Thank you! I really appreciate it 😊

@Countrycharm17 2 года назад

@@GraceNoteForge You're very welcome! I followed as well😊

@GraceNoteForge 2 года назад

😁❤️

@carlfogarthy6508 Год назад

you're an artist

@milansulc6871 Год назад

Nice work ! 👍👏♥️

@GraceNoteForge Год назад

Thank you so much 😁

@NewLife-qj9mx 2 года назад

This is a very nice video, thank you

@GraceNoteForge 2 года назад

Glad you liked it!

@dumbcat 9 месяцев назад

you should do a spoof video where every time you cut away then cut back another one of your fingers has a Band-Aid on it, until finally, you are holding the wax piece with a pirate hook

@GraceNoteForge 9 месяцев назад

😂 this cracked me up and I'm absolutely considering doing this (maybe an April fools day video?). Thank you!

@milouschmidt 2 месяца назад

very beautiful thank you ❤

@owenburgess8381 Год назад

Great job. I am learning a lot. Thank you. 😊 12:25

@GraceNoteForge Год назад

Thank you for watching 😊 I'm happy the video helps.

@briannapierce805 9 месяцев назад

🔥🔥🔥

@criticallook1352 Год назад

Sweet! :

@yazdansoleymanzadeh 2 года назад

amazing

@GraceNoteForge 2 года назад

Thank you!

@jeremiahfoster2757 8 месяцев назад

will you make a video on your polishing process and what products you use?

@johnkemas7344 Год назад

Very nice work! As a new wax carver myself, what are you using as a solvent to polish the wax that is on the cotton swab?? Does a great job without being overly aggressive??

@GraceNoteForge Год назад

Thank you! I normally use odorless mineral spirits to polish. It's not as aggressive as lighter fluid and leaves a really nice surface finish 😊

@christopherwise4993 Год назад

That's beautiful. How do you make copies for multiple casts? Because there is a chance of not getting a good one. Then it's gone. Can you show that? And what Dremel are you using?

@GraceNoteForge Год назад

Thank you! I have a separate video on my channel where I made an RTV mold for this carving in order to make copies! Here's the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nySVE1mlGa8.html And I used a jewelry flex shaft to carve this piece 😊

@bernardosandoval6220 2 года назад

Wow, awesome work. What flex shaft are you using if you don't mind me asking? Being able to control the speed like that looks super useful.

@GraceNoteForge 2 года назад

Thank you. Im not sure what brand my flexshaft is but it has a 1/4HP motor with variable speed (500-22,000 RPM) if that helps.

@phantom66cyberwolf 2 года назад

Might be a foredom maybe, very popular with variable speed?

@komitadjie 2 года назад

The handpiece definitely looked like a Foredom.

@barry7608 10 месяцев назад

Good oh, looks like jade.

@sachaknight1414 2 года назад

Lovely work. I wanted to ask about the wax carver pen you use for the bail. It doesn’t look like the battery wax pen so can I ask what pen you used for this? Thank you!

@GraceNoteForge 2 года назад

Thank you! That was an old wood burning pyrography pen that I used. It works well for wax too.

@sachaknight1414 2 года назад

@@GraceNoteForge Thank you for getting back to me. I was wondering about using a pyrography pen, but was worried that it would be too hot as the heat range is higher than that of a wax pen, so thank you for confirming that it is what you used :) I feel like the wax pools and drips nicely off the pyrography pen wire nib kind of better than the solid nibs on an electric wax carver pen

@GraceNoteForge 2 года назад

@@sachaknight1414 happy to help! 👍 mine has an old power supply with it to dial in the temperature. Without a way to adjust the temperature, it might be a little tricky to use for wax.

@jurassichumour3803 2 года назад

Amazing, what is that tool that you use to add wax?

@GraceNoteForge 2 года назад

Thank you! Its an old pyrography pen that's normally used for wood burning. With an adjustable power supply, it can be dialed in to work really well with wax.

@kyuubinokitsune4270 2 года назад

Now I understand my problem! I need to add wax and not take off it. 😂 Thank you. For polishing do you use something on the cotton? Acetone maybe? 🤔

@GraceNoteForge 2 года назад

Glad it helped! For polishing, I normally use cotton swabs with odorless mineral spirits. Then I buff the surface to a shine with a piece of leather. 😊

@audelb1818 8 месяцев назад

Question, I want to start wax carving simple jewelry, may I only use an electrical carving pen (various ends) or do I need other tools? I have no space in my appartment.

@khoihuynh5468 Год назад

Can i ask, when you polishing the wax, do you add anything into the Q-Tip ? Or just let the friction do the magic ?

@GraceNoteForge Год назад

It has some odorless mineral springs on it. It helps with polishing the wax.

@SscorpiomoonN Год назад

Is that little tool you’re using at 6:19 apart of a wax carving set? If so, how is it smoothing the wax out so nicely? Is it just the wax itself that makes it easy to work with? Haha I’ve got lots of questions!

@GraceNoteForge Год назад

Yep, that tool is from a stainless steel wax carving set. I was scraping over the wax to try and make it as smooth as possible, then I switched to sand paper to blend out the scrape makes :)

@SscorpiomoonN Год назад

@@GraceNoteForge ooh ok, thanks! I don’t think my set has one similar then😅

@deathin1119 2 года назад

Hello dear! Great work 😍😍 👏👏👏👏👏 may I ask you what kind of liquid you used in the video at 9:47 to polish the surface? Seems like the Q-tip is soaked in something liquid? Or did you use only Q-tip?

@GraceNoteForge 2 года назад

Thank you! The Q-tip has odorless mineral spirits on it. It slightly dissolves the wax and helps with polishing. 🙂

@deathin1119 2 года назад

@@GraceNoteForge oh! I see, thank you so much for your kind reply! ❤️❤️ I am afraid if it bothers you but may I ask you one more and last question? Well, do you linse the wax after the liquid is applied? I read that it may cause damage when casting it with the residue of the liquid! Or do you wait until it dries up and dont wash it away with water?

@GraceNoteForge 2 года назад

@@deathin1119 I normally just let mine air dry first without washing it and I haven't noticed any issues while casting :)

@deathin1119 2 года назад

@@GraceNoteForge thank you very much !!!!!! 😊🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

@TitusGalliusMontanus Год назад

if someone - meeeere hypothesis - couldn't afford the special wax for casting... could him achieve decent results with another wax? Like paraffin wax, sacrificing candles? while taking into account the difficulties due to the different consistency of the waxes, of course

@GraceNoteForge Год назад

Yes, paraffin wax would work for lost wax casting BUT paraffin wax by itself is really brittle and not easy to carve by hand. To fix that though, It CAN be mixed with other things to make it better suited for carving (something I've experimented with in the past). Melting some paraffin wax with a bit of glue stick (around 10% by weight) will give it some flexibility and make it easier to carve. Also, adding a crayon to the mix will give some color and help with seeing the detail of the carving. It's been a while since I've done this but I remember it working pretty well 😊

@NickMeisher 2 года назад

Are there 3D wax printers out today powerful enough to do this same type of work?

@GraceNoteForge 2 года назад

I haven't tried printing anything this big before but I would imagine a resin printer would easily be able to print something similar in castable resin. 😊