We Fixed Our Pit Boss Temperature Issues in UNDER 5 Minutes!

Подписаться 27 тыс.

Просмотров 395 тыс.

50% 1

A simple hack fixed our Pit Boss pellet grill temperature problems in minutes. See how we did it!
🔥 Heat Deflector Mod now available on Amazon. Check it out HERE ➡️ amzn.to/4507fxT
🔥 Alternate Flame Tamer Style Diffuser ALSO now available on Amazon. ➡️ amzn.to/45SFZRx
After struggling to understand why my actual Pit Boss pellet grill temperature was not matching my controller temperature, I think I finally figured it out and share a simple hack to fix the two main Pit Boss temperature issues in this video. I also show you how to even out the hot spot temperature in the center of your Pit Boss above the firepot.
🛒 Everything I Cook With ➡️ www.amazon.com/shop/madbackyard
📪 Join our Newsletter! ➡️ madbackyard.myflodesk.com/
📱 Check out our FACEBOOK Page!! ➡️ / madbackyard
🔥 Smokes Like a Boss Website (No Affiliation to Mad Backyard) ➡️ www.smokeslikeaboss.com
This video is NOT sponsored. We love to link to products we have used or researched. Assume those links are affiliate links which means we may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
📒 Products Used in this Video📒
➡️ Heat Deflector Mod (The Version Available on Amazon)
➡️ amzn.to/4507fxT
➡️ Flame Tamer Mod for Pit Bosses with Curved Flame Broiler (Amazon Version)
➡️ amzn.to/45SFZRx
➡️ ThermoPro Probe Thermometer
➡️ amzn.to/3MVAoSB
➡️ Disposable Black Nitrile Food Handling Gloves
➡️ amzn.to/3w7YnWr
Check out the step-by-step Article that accompanies this video ➡️ www.madbackyard.com/pit-boss-...
🔥 Full Z Grills 700D3 Pellet Grill Review ➡️ www.madbackyard.com/z-grills-...
🔥 More MUST WATCH Pit Boss Videos 🔥
How to Get MORE SMOKE from your Pellet Grill ➡️ • Pellet Grill Not Makin...
How to REMOVE the SAFETY GRID on a Pit Boss Hopper ➡️ • Removing the Safety Gr...
How to QUICKLY INSTALL the TOP RACK on a Pit Boss ➡️ • Install the Top Rack o...
How to EMPTY the Pit Boss Hopper and Auger ➡️ • How to Empty a Pit Bos...
How To START and Season a New Pit Boss (BURN OFF) ➡️ • How to Start and Seaso...
♨️ Pit Boss Recipe Videos ♨️
Baby Back Ribs ➡️ • EASY Baby Back Ribs on...
Pork Butt ➡️ • Pulled Pork Smoked on ...
Pork Tenderloin ➡️ • Smoked Pork Loin on a ...
Smoked Chicken Breasts ➡️ • How to Make JUICY Smok...
📒 Favorite Pit Boss Recipes📒
3-2-1 Pork Spareribs ➡️ www.madbackyard.com/pit-boss-...
Pulled Pork ➡️ www.madbackyard.com/pit-boss-...
Beef Brisket ➡️ www.madbackyard.com/pit-boss-...
Chicken Thighs ➡️ www.madbackyard.com/pit-boss-...
Salmon ➡️ www.madbackyard.com/pit-boss-...
Mac and Cheese ➡️ www.madbackyard.com/pit-boss-...
⏰⏰Chapters⏰⏰
0:00 Intro
0:14 Temperature Accuracy
2:29 Temperature Unevenness
3:28 Other Pellet Grill Comparison
5:43 Heat Deflector
8:10 Flame Tamer
#pitboss #pitbossnation #pelletgrill #temperature

Хобби

Опубликовано:

19 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 564

@madbackyard 10 месяцев назад

🔥 Heat Deflector Mod now available on Amazon. Check it out HERE ➡ amzn.to/456wwWA 🔥 Flame Tamer Style Diffuser ALSO now available on Amazon. ➡ amzn.to/45SFZRx

@75novaguy73 3 месяца назад

That diffuser is twice as expensive as smokeslikeaboss but the heat deflector is half as much

@youmustbekidding7341 2 месяца назад

A Better brand of a pellet grill is available everwhere

@jmc041071 2 месяца назад

Will the heat deflector work on a Pit Boss 700FB1?

@techguy3507 2 месяца назад

Thank you. I kept saying there was a crazy hot spot in the center. I'm new to this so I was so happy to hear I was right! I'll order the part!

@vernonverrett844 2 месяца назад

Thanks for being so kind to share these Useful tips for the Pitt Boss grills.

@madbackyard 2 месяца назад

Thanks for watching!

@kensharp1630 3 месяца назад

I gave up on the direct flame option on my Pit Boss. I purchased a Heat defuser from Smoke Daddy which is modified for the pit boss curved sides. Enjoy your videos.

@juliestockton8079 3 месяца назад

Thanks for this very informative and helpful video!

@Kevin-bi3qt 24 дня назад

Thank you for this video. I made these modifications, and it was a great improvement.

@madbackyard 22 дня назад

Great to hear! Thanks!

@chuckmarkham9303 11 месяцев назад

Thanks VERY MUCH for this info!!.My PitBoss Pro Series 850 was getting as much a 30-40 degree difference from display Temp to ACTUAL temp.Was going to buy a replacement Temp probe until seeing this video. Kudos to you!!

@madbackyard 11 месяцев назад

Glad it was helpful, thanks for watching!

@ramonlawrence8375 Месяц назад

Just bought a Pitboss sportsman 820 and had the heat issue because of the center being hotter. So glad i came across your page🙏.

@madbackyard Месяц назад

Glad it was helpful, thanks for watching!

@phtevenchevas3960 4 месяца назад

Well done video! Great tips

@heavyg2968 5 месяцев назад

I finally did my homework and came across this video. I purchased the two mods for the curved air gap and a diffuser over the firebox for my PB1100 Pro Pellet and Gas split. I was never able to keep my large low and slow cuts on the pellet grill long enough and therefore they were never as tender as I hoped. The center of the grill would run 20-40 deg over the firepot and therefore it cooked too quickly. Roasted a 5.5 lb pork butt yesterday and it pulled away from the bone with ease and I could tell it was going to shred nicely. Very happy with these changes and now I have hope for tender brisket the next time I smoke. Thanks very much for this info.

@triage9082 4 месяца назад

I just got this combo too and I think I'm having temp regulation issues too. Set to 270 fluctuates between 270 to 285. Can you link me the stuff you bought?

@fixandfoodgman6987 10 месяцев назад

Awesome Thks just got into smoking and noticed the temp flux

@marcusdavilla1310 2 месяца назад

Concise and very helpful- Thank you!

@madbackyard 2 месяца назад

Glad it helped!

@FSULAUBACH 4 месяца назад

Thank you for this. I've been having crazy temp differences between what it was reporting and what it actually was. I just ordered this it should be here today fingers crossed because it's been driving my bunkers trying to figure out!

@madbackyard 4 месяца назад

Glad it helped, thanks for watching!

@jasonverquin4427 Год назад

Thank you! Help-full and to the point. Very good video 👍👍

@madbackyard Год назад

Thanks Jason!

@mikebingham469 8 месяцев назад

Very good info! New Pit Boss owner here. Keep ‘em coming! 👍

@madbackyard 8 месяцев назад

Thanks!! Make sure to also check out our website madbackyard.com!

@jakesmith5739 Год назад

Thanks guys, awesome video. I am experiencing the same issue with the PB 1150 running below the setting. Thanks!

@madbackyard Год назад

Glad it helped, thanks for watching!

@75novaguy73 3 месяца назад

Neat. I watched a video on their website and it appears that not all pitbosses have this issue. Maybe just the older ones??? I got to go pull the cover on ours and check now. We've only done the bake off and cooked in it once so wasn't really paying attention to that. We have the slider for searing etc but I do believe ill be making one from a sheet of stainless myself now that I know what it looks like. Now that I know this is an issue for a hot spot in the middle It does explain some of the oddities we experienced in cooking. I will order that side cover tho for the probe if ours doesnt have it.

@sakamoto5195 Год назад

I LOVE my pit boss 1150 2gen . I bought it for my husband but then I use it all the time. It smokes a ton! My neighbors love the smell. I will implement these two items for when I’m cooking ribs and brisket. Thank you!!!

@madbackyard Год назад

That is awesome! Thanks for watching!

@Shamrock365lawn 5 месяцев назад

Omg! Thank you! I upgraded my panel to wifi/bluetooth and got these….nailin the temps now

@madbackyard 5 месяцев назад

Glad it helped!

@sslocke 2 месяца назад

Pit Boss seems to have addressed the issue of heat going to the temp probe themselves. Just checked and my Nav 850 has a rounded off the area that the broiler sits on. So it's nice they tried to fix that issue.

@madbackyard 2 месяца назад

850s have always been rounded for some unknown reason…

@ctech01 11 месяцев назад

Thanks for the info. I have a PB850PS2 Pro Series. With the smaller cooking area, it can be tricky moving large cuts of meat around and not getting it over searer. The 4-window Flame Tamer is the mod i have been looking for. I just ordered it, and Subscribed, Thank you.😎

@madbackyard 11 месяцев назад

Glad it helped, thanks for watching and subscribing!

@Hurc Год назад

The pro 850 has the curved seat already thankfully, but I did just order the piece for over the burn pot. Thanks for the info. Good vids. Smoke On

@madbackyard Год назад

Cool, thanks for watching!

@UnavailableUserID 4 месяца назад

Thanks for this ! I just bought a Pit Boss 1250 Competition Series and made my own for free with scrap laying around the garage.

@madbackyard 4 месяца назад

That is awesome!

@Farcry-yh4mu 20 дней назад

I just bought a Pro850 from Lowe's and they've already fixed the gap issue by the probe. I did buy the diverter for over the firebox. Thanks for the tip

@user-gv2nz6io9g 11 дней назад

I bought the same grill a couple months ago and I noticed the curved bit was already fixed

@johnnyhoover5870 Год назад

Glad I found your channel. I made my own cover for the fire box but never thought about the gap by the thermometer. Thanks for the video.

@madbackyard Год назад

Right on Johnny, thanks for watching!

@Deluxe4066 7 месяцев назад

Didn’t feel like spending $80 on them since the reason I went with the pit boss is because it was cheaper then all the others. Instead I went to Lowe’s and bought 26 gauge sheet metal for $9 and made took some measurements and cut them my self with my harbor freight shears.

@madbackyard 7 месяцев назад

That’s great!!

@ericskelton8109 6 месяцев назад

@@madbackyard I hope the sheet metal wasn't galvanized.

@austincurrier7460 25 дней назад

@@ericskelton8109probably not i hope . If your trying to save money why would you buy the galvanized stuff lol

@badouglas33 23 дня назад

Make me one, please. 😊

@MichaelCook1981 8 дней назад

@@ericskelton8109A36 steel isn’t usually galvanized.

@gchomuk Год назад

Great info here, thanks. I've suspected the temp readings on my Pitboss 700fb weren't accurate. Was excited to see this fix. I checked the website you mentioned, and they don't list the 700fb. Hmm. Might be time to disassemble it, clean it, and have a look. My first pellet smoker. My son found them on sale over the winter, and he talked me into buying one, too. I'm glad I did. It's much easier to use than my WSM. Consequently, I use it more often.

@madbackyard Год назад

I love my WSM. First smoker I ever bought. Everything I have made in It has tasted Amazing. But yes, it can be an ordeal to setup and cleanup for a just a simple meal.

@duanehenicke6602 11 месяцев назад

That's the first thing most notice once buying a pellet grill. You cook way more outside than you ever did. I love mine for baking.

@imadjawad4408 7 месяцев назад

very helpful🙂, thank you for sharing!

@madbackyard 7 месяцев назад

Thank you! 🙏

@michaelnemeth689 Год назад

Great video. Just placed my order!

@madbackyard Год назад

Glad it helped, thanks for watching!

@mlwilson69 10 месяцев назад

Ordered both for my Austin XL and Laredo 1000. I have to say they made a major difference in my temp fluctuations. I would, definitely, recommend the diffuser and air gap mod to anyone having temperature issues.

@madbackyard 10 месяцев назад

Awesome, thanks for the feedback, it's always good to hear that products I recommend are working for other people besides just myself! 🤪

@cnote4987 6 месяцев назад

Omg you are so right 😢😢😢 thank you 🙏

@shanesimmons6127 7 месяцев назад

This was a really helpful video. I ordered both today. Excited to see the difference

@madbackyard 7 месяцев назад

Glad it helped Shane! Thanks for watching!!

@marilyndoucet3106 5 месяцев назад

Where can I order these items? 2:27

@madbackyard 5 месяцев назад

@@marilyndoucet3106 I bought mine from smokeslikeaboss.com. There are also Amazon versions available now, keep in mind they are not exactly the same but many have purchased them and reported good results: Heat Deflector Mod ➡ amzn.to/456wwWA 🔥 Flame Tamer Style Diffuser ➡ amzn.to/45SFZRx

@Bryan-rl2ik 11 месяцев назад

Thank you so much ! This is huge

@madbackyard 11 месяцев назад

Thanks!

@shannonlambert8826 2 месяца назад

Thanks for the video . I just looked at my pit boss and yeah my thermometer is coated with a lot of grease and chard food . I have to clean now after watching this .

@madbackyard 2 месяца назад

Glad it helped!

@michaelkeohane7941 3 месяца назад

I really appreciate your taking the time to give assistance for these Pit Boss Smokers. I am still new to the game of smokers. I bought a Pit Boss 1150 at my local Lowes back in Summer of 2022. It took me three or four smokes before I realized that the very important piece of metal that should have been at the end of the heat deflector was missing and causing my cooks to take entirely too long because of the false temperature. I did the mods and it helped a little, but I have found that my Pit Boss to be an epic failure. It is less than two years old and it struggled last year to get to 350 and stay there. I probably got a lemon. I have a friend who has the Pit Boss 850 and she doesn't have half the problems. I am going to spend the extra money and get a Traeger Ironwood XL. It is a lot of money, but I have had some really frustrating smokes with this Pit Boss. What is most annoying about the Pit Boss 1150 is that they are still making them without the heat deflector mod.

@tsbrooks007 2 месяца назад

I agree with you on the temperature issues you mentioned. I've had my 1150 since the summer it came out and I've been through 3 control boards including the original one, an augur motor and a fan. Luckily the control boards were replaced under warranty (pretty good customer service in the 1st year, but still a pain). The rest out of pocket but not expensive. I just replaced the inner temperature probe before seeing this video, in hopes of getting more accurate temps. Shout out to Mad Backyard for sharing these potential fixes!

@tvideo1189 Месяц назад

If I am not too late, look at the Camp Chef Woodwind series. GREAT pellet smokers, MUCH better than Traeger.

@edwardcowburn2632 9 месяцев назад

The air gap on my pro series 850 is rounded on the left side already. I bought the flame tamer a few years ago and it works wonderfully! It was well worth the money. Thanks so much for this video. Keep up the good work.

@madbackyard 9 месяцев назад

Thanks so much!!

@johnnycortez46 7 месяцев назад

@@madbackyard I just bought the navigator 850g. Haven't used it yet. Maybe that flame tamer would work on mine. Or just cut a piece "C" Channel and use it

@dhansel4835 4 месяца назад

Pit Boss 1150 temp Run-A-Way I purchased my Pit Boss last November when Lowe’s had their $500 off sale. I used it twice without any problem. The cooking temp was rock solid. Yesterday, Feb 14th I put some chicken leg quarters and hamburger meat on the Pit Boss. I had the temp set at 270 deg F. I have been watching the You Tube videos on cooking chicken leg quarters at 270 deg F. for about 3-4 hours. I was outside watching things when in about 2 hours my temperature went from 270 deg to 310 deg F. I hadn’t changed anything. I called Pit Boss and talked to Mr. Jo. He hadn’t had a clue. He ask what kind of pellets I was using and I told him Oak Kingsford pellets. He said he never heard the name Kingsford pellets or charcoal bricks. The pellets were new and dry so I don’t know what was going on. I always clean out all the pellets when I cook. This includes all the pellets in the auger tube. Anyone have this problem?

@danielayers6845 Год назад

This is awesome bro. I noticed mine had the same issues. I will definitely be getting these things to fix it

@madbackyard Год назад

Awesome, thanks for watching! Let us know how they work for you.

@dtrust68 Год назад

i needed this video like a year ago lol. the temps were like 30 to 40 deg off. thinking it was the thermometer they sent me a new one and i had the same issue. got tired of it, so i sold my pit boss.

@madbackyard Год назад

Haha. Well thanks for watching!

@chaiveyreid 11 месяцев назад

Great info!!

@madbackyard 11 месяцев назад

Glad it was helpful! Thanks!

@stebstebanesier6205 Год назад

I have a ZGRILLS smoker, got it back in 2019, before prices went crazy. I love it, never had a bit of trouble with it, only complaint is that it didn't have casters on the hopper side legs, but, nothing a welder and some casters ordered from Amazon didn't take of.

@madbackyard Год назад

Yes mine has performed well too. I only wish the lid and frame were a little more heavy duty but temperature control has been great. Thankfully they must have switched to adding 4 casters since then!

@jackratcliffe2916 Год назад

Thank you for sharing your video . I enjoyed the information . I have a 1600 Elite and will try the plate there at the temp. gage area. Thank You again

@madbackyard Год назад

Glad it was helpful! Thanks!

@oysterphish7516 3 месяца назад

Did this fit your 1600?

@OKIEBBQ Год назад

This is a great video!

@madbackyard Год назад

Thank you!

@petejansen8098 8 месяцев назад

Great info thanks

@madbackyard 8 месяцев назад

Glad it was helpful!

@scottconway2358 8 месяцев назад

This is incredibly helpful. I just bought my first pellet grill (Pit Boss Pro 1600) last week, and have noticed exactly what you just described. Thanks for all of your content!

@madbackyard 8 месяцев назад

Glad it helped! Thanks!

@travisguilbeau8404 8 месяцев назад

I went with Pitboss specifically because the sear plate but I wasn’t aware of the issues I’d have. I’m glad I found this, I actually ordered the flame tamer. I didn’t need the air gap mod because my pit has the round plate. We will see how it goes!

@Jaykav99 8 месяцев назад

Same for me with the 1150...good luck to us both now i have to some how wait patiently for the mods to ship lol

@travisguilbeau8404 8 месяцев назад

@@Jaykav99 let me know how it works for you. As soon as I get it I’m doing a Boston butt!

@ericmoran9510 Месяц назад

Is it the same size for the 1150 and 1600. I just got a 1600 proseries today.

@Sebastopolmark Год назад

GREAT video. I have a Camp Chef and it seems that all the pellet brands have their own unique problems. One thing I didn't hear you say how important it is to keep that temp. probe CLEAN. Once the probe gets caked up, the grill temp can vary quite a bit so CLEAN THAT TEMP PROBE! !! !!!

@madbackyard Год назад

Thanks! Yes, you are absolutely correct, thanks for pointing that out!

@mngold3464 11 месяцев назад

I've been having so many problems with mine and it's so disappointing. Gonna try this and see if it helps

@kurtjunkersfeld6074 7 месяцев назад

Great video. I recently got a PB 850 Pro Series from Lowes. I've done some good cooking on it and got some good results, but I've been seeing some comments around about inaccurate temperatures and I stumbled up on your video. Happy to report that the first fix you had (the deflector thing) is actually included in my Pitboss so they must have watched your video :P. My PB isn't the same as yours, so I don't have that big flat plate that's level with my burn pot like yours. I think I'll go get some steel and just make a simple defelctor that will rest on the bottom of my grill and work like that deflector, kinda wondering if there's some way I can add a lever similar to the searing plate lever that slides the deflector out of the way... don't know that I want to hack up my grill that much though so I think I'll just do it the hard way and remove the burner plate every time. Thanks for all of the tips!

@madbackyard 7 месяцев назад

Thanks for the kind words! Yes, the 850 has always had a curved lip from what I understand. Not sure why it's different on just that model, but at least you dont need that mod. I took out the big flat plate you mention because other people claimed it did nothing and was throwing off their temperatures. I'm not sure if it helped but it definitely hasn't hurt anything. And I saw Pit Boss stopped including it on newer models as well so they must have found the same thing. The flame tamer still sits on top of the burn pot even without it. In fact I pull on it a little and squeeze it around the screw heads so it actually sits very snug and doesn't move around at all once it pinches down on them. If I want to knock it off to sear I open the sear plate and knock it out of the way with a slotted screwdriver and I don't have to take the flame broiler off while cooking. Hope that helps!

@jojofixer 11 месяцев назад

My Pit Boss has given me an overheat error from day 1. A new control panel didn't fix it but THAT metal side piece will this afternoon. Thank you!

@madbackyard 11 месяцев назад

Hopefully does the trick, thanks for watching!

@bradleygray2511 9 месяцев назад

Wrap temp prob loosely with tin foil. I was struggling with temp issues on my copperhead v5 for three years and finally figured it out. Tin foil is your friend brother! Thanks for the tips

@madbackyard 9 месяцев назад

Interesting...thanks for sharing! What's the rationale behind doing this? Just to keep it clean or to lower the perceived temperature?

@MrLemurman 6 месяцев назад

I am new to pellet smoking and have a Lockhart Platinum which has put a lot of ash in the box and I was on the phone with Pit Boss this morning and I mentioned I had just ordered the diffuser and the lady told me that ANY 3rd party accessory would void the warranty.... having read many here that have already installed these two items, I think it is the right path to a fix for many....

@madbackyard 6 месяцев назад

You can use the diffuser without screwing it in. It just slips right into the slots on the flame broiler and the weight will hold it in place.

@smokeslikeaboss Год назад

Thanks for the great review, so awesome! Great video, appreciate it. Tom Boden (Smokes Like A Boss)

@madbackyard Год назад

Thanks Tom, and thanks for making the products!

@tsbrooks007 2 месяца назад

Shout out to Mad Backyard for sharing these potential fixes! I've been frustrated with temperature issues since the 1150 came out. I'm ordering the deflector and tamer as soon as possible! Hopefully, Pit Boss will have enough sense to incorporate these two modifications into there production line so that new sales customers won't suffer our fate, and pay you a consulting fee as well.

@madbackyard 2 месяца назад

Ha, I won't hold my breath, but thank you for the kind words!

@ezrabrooks12 Год назад

Good Video/Info.

@madbackyard Год назад

Thanks!

@mJones6 Год назад

Hello. Just got the PB850 ps2 and it has the rounded lip on both sides. Doesn’t have the fire pot cover. Good to see them making corrections! Maybe they saw your video!

@madbackyard Год назад

Hey Michael- thanks for watching! I believe I heard that they never changed the rounded lip on the 850 for some reason. A couple other people have told me their 850s don’t have this issue. All the other recent models, as of right now at least, do though. The smokes like a boss guys have the full list on their website. Thankfully you don’t have to deal with it!

@BlueandSong 11 месяцев назад

I have have the same Pit Boss, PB850PS2 and just checked their list and looks like Heat deflector isn’t available for my model.

@reddog907 Год назад

My 1150 has the heat diffuser and is curved , I have never had a problem with fluctuating temps. As for the flame tamer I do a lot of searing and prefer that it does not get covered. Thanks for your tips.

@madbackyard Год назад

Thanks for watching Rob! Glad to hear you haven't had temperature issues like I did. I like that the flame tamer is easily removable when you want to use the direct heat. You can even use slotted screwdriver through the grates and knock it out of the way so you don't' have to take everything out to move it.

@reddog907 Год назад

@@madbackyard ha ha I like the screw driver trick , food for thought , pun intended. Cheers

@madbackyard Год назад

Nice.

@lequadagilbert8532 Месяц назад

Thanks for that info! What’s the brand of thermometer you’re using?

@madbackyard Месяц назад

That was an older one, but you can use any good probe thermometer. Make sure they come with the little clips to attach to your grates. I now like this one from Thermopro: amzn.to/3MVAoSB

@chrisyerp174 8 месяцев назад

Did all these mods years ago where where ya at lol. I did thermal images via my fluke got my temp deffs to 8 degrees across my whole top

@madbackyard 8 месяцев назад

Awesome!

@heavyg2968 5 месяцев назад

Thanks!

@madbackyard 5 месяцев назад

Thank you so much!!

@The_Real_Indiana_Joe 4 месяца назад

My pit boss is rounded on the left side, they must have changed that. The hot spot in the middle was a problem though. I took a flat piece of steel (about 5"x7" or so), drilled a hole in each corner and put a small carriage bolt through with a double nut so I could adjust the height. I put it on the heat shied right over the hot spot and adjusted the height so it sits right below the grates. It did the trick, no hotspot 😁

@roguerebel2023 Год назад

As I was watching this I was thinking that my Pit Boss wasn't flat on the left side that I remember so I checked, and sure enough mine is rounded on both ends. I have a PB820PS1 which is about four years old, so maybe the newer models are flat. The only issue I have had with it is that priming doesn't work anymore, otherwise it has been a great unit!

@madbackyard Год назад

Yes, some of the previous models were rounded. I’m not sure why they made the change on the 1150 and other newer series. That stinks about priming. So the auger still turns normally, just not when you hold the prime button?

@DaveHess 10 месяцев назад

To prevent the heat from coming up the grate, I put heavy duty foil over the entire curved dome. It also keeps the grease off of it.

@Shak22B 9 месяцев назад

I just used foil on the plate today and had some odd results. Seemed like my cook took an extra hr - 1.5 hrs. I think the foil caused even further temp issues.

@donproctor4480 8 месяцев назад

This video was very helpful. I’ve owned my classic 700 for a year now, and noticed a big difference in temp range, the digital I’ll have set at 250 but the gauge on the hood reads 200-225, I couldn’t figure out which to go by, and either ended up with a fast hot cook or one that takes way longer then expected. I’ve would’ve never thought there’s was a gap on the broiler end next to thermometer and could possible throw off the temp. How ever I will need to do a temp test on center of grill, I’ve found that at the back or close to sides cooks faster and hotter then the center on mine. I assume with the flame diffuser you found that with the opening pointed to front/back may have forced to much heat in those areas and causing a faster or hotter cook?

@madbackyard 8 месяцев назад

Thanks for watching! Yes, I like putting the flame tamer facing side to side rather than front to back, it seems to even out the temps across the grates a bit more on my grill. Otherwise, too much hot air was blowing to the front and if I put my food right over the edge of the flame broiler it seemed to get too much heat no matter where it was on the grill but especially in the center.

@velmasshaggy Год назад

Thank you sir. I recently purchased the 1600 series and I've noticed that it's so big it's hard to keep an even temperature across the entire space

@madbackyard Год назад

Glad I could help, thanks for watching!

@oysterphish7516 3 месяца назад

Did this fit your 1600

@3FAZNI 9 месяцев назад

You know what, amazing video. Thank you so much.

@madbackyard 9 месяцев назад

Thank you so much!!

@paulfamilyadventures439 11 месяцев назад

I'm frustrated right now trying to cook ribs. Just ordered suggested mods, I hope they give you a commission. Thanks for making this video!

@madbackyard 11 месяцев назад

Ha, no commission or affiliation with them. But the parts worked for me. In the meantime try putting your ribs on upper rack with an aluminum water pan below to block and disperse some of the direct heat from the fire pot.

@madbackyard 11 месяцев назад

You can also ball up some foil into a tube and shove it on the shelf where the heat deflector will eventually go to block the hot air from hitting your thermostat. Somebody else commented with that idea and it’s a good one.

@Ih8blm 10 месяцев назад

thanks for sharing this info,, i will subscribe to your channel, will these parts fit a pit boss 700fb?

@macleanb 6 месяцев назад

I have a Pitt boss, it was great for just over a year now it keeps catching fire. I took it apart and cleaned it out, vacuumed it out as well. Any suggestions on another grill? It got so hot the paint came off of it. Luckily I caught it in time.

@tonykuriger573 3 месяца назад

Got a pit boss pro 850 about 3 months ago. The ledge for the heat-shield is curved to match so seems like that feature has been fixed as standard. The extra shield for the firepot sounds nifty though.

@madbackyard 3 месяца назад

For whatever reason the 850 never had this problem. But on most other models they made a straight edge. I will have to look at some new floor models this spring to see if they ever changed it on the larger versions.

@carlpettey5651 2 месяца назад

Thanks you for your video. I went to their site and it appears they don't support the 820S model I have and couldn't find another company who makes one. Wish I could upgrade to a newer model but am retired now and not in my budget.

@whitetiger6868 6 месяцев назад

I am in Northern Illinois so in winter i have a welding blanket from a harbor Freight that i use to cover the smoker to help hold in the heat better for those cold winter smokes. I had a vertical smoker from Pit Boss originally and it had a heat diffuser that came with it. I wonder if that would work here if they offer it as a replacement part

@madbackyard 6 месяцев назад

Great tip!

@masonryjoe 9 месяцев назад

Wow, just looked to get one and out of stock indefinitely, what happened, guess I'm going to have to make one ! I subbed and liked, cheers !

@madbackyard 9 месяцев назад

hi Joe- Thanks for the sub! They go in and out of stock pretty frequently. I would just check back in a day or two.

@masonryjoe 9 месяцев назад

Ok, Thank you !@@madbackyard

@ericviola8659 Год назад

I noticed my temperature fluctuations were happening because of smoke residue/grease building up on the wired connection prongs for the probe. The prongs for me were located on the backside of the pellet hopper behind a metal guard that can be unscrewed. There are wires with metal prongs at the end that connect into each other. Its the probe connecting into the controller board. After removing the guard, the prongs have a rubber guard around them. I found residue all around the outside and the inside of the rubber. I cleaned them with 90% isopropyl alcohol with q-tips and it helped immensley. I do keep the actual probe clean too but it doesnt help near the amount as keeping the connector pieces free of residue. My original problem was the grill kept overheating and shutting off after 6 months of decent use. Tried a few different things but that was the culprit, and it also helpes with temperature fluctuations and keeping the correct temperature that is read on the sceen. I regularly clean once per month or 2 now and haven't had any issues at all with overheating or incorrect temperatures.

@madbackyard Год назад

Thanks for sharing that tip! It’s not an area I would think to check on the grill for grease buildup but I guess it can happen!

@ericviola8659 Год назад

@Mad Backyard ya its on a pitboss 580 square inch. I bought an Austin xl onyx and noticed it didn't have those prongs on the outside of the smoker any where. So it's probably just specific to that models or models that run the connection on the outside

@madbackyard Год назад

Cool, thanks for sharing!

@Trumpetmaster77 Год назад

New subscriber here, great video

@madbackyard Год назад

Awesome! Thank you!

@hugdeath929 Год назад

Fantastic tips. Just replaced my Traeger with a Pit Boss and only used it once so far. I did however notice a significant variance in temperatures. I’m going to try these remedies you suggested. I just need to somehow remember to remove the shield over the pot for searing before I heat up the grill. I’ll probably forget though 😁

@madbackyard Год назад

Thanks for watching! The smokes like a boss guys recommend using a slotted screwdriver through the open flame broiler slots to knock it out of the way if needed.

@Autoflowergrunt 11 месяцев назад

@@madbackyardyea that makes sense instead of trying to remove pieces quick and easy

@ryanragan8899 10 месяцев назад

Did you get these mods? How did they work, specifically the box over the fire pot?

@hugdeath929 10 месяцев назад

@@ryanragan8899 Not yet. I have a pretty big event coming up so I didn’t want to experiment before the event. I’ll be making the changes once that’s done.

@mikebarcus3750 9 месяцев назад

Thank you for this video! I was having trouble with my brand new Pit Boss grill showing the ErH code for overheating when I would try to preheat it. This may be exactly what I need!

@madbackyard 9 месяцев назад

Glad it helped! Let us know if it works for you.

@afatherofmany 9 месяцев назад

Well done, I’m buying the Austin XL today

@madbackyard 9 месяцев назад

Thanks! That’s awesome! Make sure to check out our video on how to start and season a new pit boss when it arrives!

@afatherofmany 9 месяцев назад

@madbackyard8742 thanks, I definitely will! I just got it for $300 on sale from 497.00

@madbackyard 9 месяцев назад

Great price! Well done 👍

@holcombgl Год назад

Have both mods. Have the 3 window flame tamer. I have the older Pitboss 1000. Same issue lack of smoke flavor unable to cook anything over the middle even on the top rack it gets crispy on the bottom of the meat. Temps all over the place. Get more accurate temps with the heat shield to the side. However get issue with flame going out with the boiler plate over the middle especially on lower temps not so much on higher temps. Also it takes a while for the grill to get up to temp with it on as well as it is burning a lot hotter with it on if you measure across the grill but you do get more even cooking. I have had my Pitboss for 6 years. So I am just riding with it until I can pick up a new pellet grill but Pitboss will not be an option next go around. Borrowed my friend old Traeger not the one with the PID system. Cooked ribs at 225 on both with same seasoning and the difference in flavor and presentation was vastly different.

@madbackyard Год назад

I have had a good experience with the Z Grill if you are looking for an alternative to Pit Boss that's not as expensive as a Traeger. Supposedly it was started by some designers who used to work at Traeger but I'm not 100% sure if that's true. It's definitely not built as solid and heavy duty as a Traeger, or even the Pit Boss for that matter, BUT it has really even and consistent heating if that's the main thing you are looking for. Here's the full review on our website. Thanks for watching! www.madbackyard.com/z-grills-pellet-grill-review/

@holcombgl Год назад

@@madbackyard Thanks for the response. I think I will just dish out the money this time. Looking at a rectec or the weber ex6. Leaning more to the Weber for its features.

@christopherjohnson8469 Месяц назад

I am building a refrigerator smoker, and I'm stuck with airflow, temp control, and mitigating dirty smoke. Any advice would be appreciated.

@kirbybruc 8 месяцев назад

Thanks for the video, I'm going to buy a Z Grill.

@madbackyard 8 месяцев назад

😆

@coyote5.02 2 месяца назад

Will these work on the pit boss pro 600 series.

@kimberlyvaughan3430 Год назад

Looks good. I use a 1/2 inch deep cookie sheet with water to deflect the ash, plus the water helps keep the meat moist 😊 doing this for too many years,haha. God Bless 😊

@madbackyard Год назад

Thanks Kimberly, that sounds like a great tip!

@Bobbykeyse 4 месяца назад

You left the diffuser over the auger and fire pot on and the use the fire pot cover ?

@user-zw4jf8sc8i 8 месяцев назад

Great video! Have you run into any problems with the Pit Boss temperature being too high (e.g. higher than what you set the control to)? Ours is always too hot. Pit Boss sent us a new temperature probe, but that didn't fix the issue.

@madbackyard 7 месяцев назад

Thank you! Make sure to also kelp the temp probe very clean with isopropyl alcohol so it’s reading the true temp. I think the flame tamer might help as well if the issue is mostly in the center. If it’s the entire pit boss and WAY off, by like more than 50-100 degrees, as I’ve heard some people say, you may need a new control board and it’d be better just to contact pit boss about getting a new model.

@dspur3994 Год назад

Z Grill temp probe, fire pot, and diffuser plate design just like my 2016 Traeger.

@madbackyard Год назад

Yes, they are very similar in design. I think I read somewhere that Z grills was actually started by some old Traeger engineers.

@geom_96 6 месяцев назад

I got a flame tamer and left side is still hotter than the right.. any suggestions? I have a pro series 850

@KAndy1906 24 дня назад

@madbackyard I have a Pitboss Lexington 540 and while the auger is working, the fan motor is not. I went for my first cook of the year and didn’t hear the familiar roar at turn on. How do I fix this???

@user-ng8zp2lu5b 8 месяцев назад

I took delivery of my 1150 PS2 several days ago. I am getting external probe temp readings 20-30 degrees lower on the left side and 70-80 degrees higher on the right side than what the Pit Boss read-out indicates. I can put an external probe right next to the PIT BOSS built in probe probe and get the same results; much lower temp reading on the exteranl probe.. I have tried this with several different external probes. Wonder if the PIt Boss probe is defective or that there may be an issue with the actual read-out due to software issues.

@desiretuiel 6 месяцев назад

Does this fit the 850?

@stone8597 11 месяцев назад

I own a Louisiana smoker that looks a lot like the Pit Boss. I am having the opposite problem. To get the grill to as low as 200 - 220 I have to set the computer to 170, and that is low as the computer goes. Any though on how to solve the problem? Thanks, and this is an excellent video.

@madbackyard 11 месяцев назад

Thanks for the kind words! I haven’t used a Louisiana pellet smoker personally but a couple thoughts come to mind. Make sure the temperature probe is very clean. You can use some isopropyl alcohol on a paper towel to wipe off any accumulated grease that may be blocking heat from getting to it thus giving you a lower temperature reading. Secondly, it’s HOT everywhere in the country right now. It’s really hard to keep temps down in any smoker under 200 on a hot day especially in direct sunlight. Try moving the smoker to the shade and also opening your exhaust vent all the way on hot days to get that airflow moving through a little faster. Hope that helps!

@BLUDSHOTiZ 6 месяцев назад

They mention that the Austin XL Onyx does not need the air gap mod but I'm going to look into the flame tamer, thanks for the info!

@madbackyard 6 месяцев назад

Thanks for watching! I'm not sure about that model. Just check if the lip of the shelf it rests on is already curved and flush against it. I know that's how the 850 pro series is.

@BLUDSHOTiZ 6 месяцев назад

@@madbackyard yeah they're curved from the factory on the new onyx.

@slushpupppy 6 месяцев назад

Do these heat deflectors not work on the 850 competition series? That's what I have and I'm having temp issues. I set my pit boss to 350 and it has trouble staying at 320 at times. Not sure why there is such a diff in temp but it doesn't look like they offer the heat deflectors for my model.

@jackratcliffe2916 Год назад

I just ordered both items that you use. Look forward to share my experience. I'm retired , 75 years old, Tool & Die Machnist and Master Pattern Maker. But I'll let these people make mine..just saying

@madbackyard Год назад

Haha, well thanks for watching. Sometimes it’s just easier that way isn’t it!

@teeb9969 2 месяца назад

I cooked some burgers on direct flame on out boss came out great. Only thing is pellets ran out really fast. Possibly because it keeps trying to reach the temperature 350 I set it to but it will never reach it bc I grilled with the lid open. So the cpu throws them pellets in heavy. So I’m thinking. Just set it to maybe 200 or so to slow it down but keep that direct flame?

@woody65536 11 месяцев назад

I am going to try putting foil over the broiler when I do ribs and brisket instead of getting the flame tamer.

@madbackyard 11 месяцев назад

Let us know how it works for you!

@ajentink85 Год назад

Very helpful! I have a pit boss 1100 sportsman and find the variance in temp from left to right can often be over 100 degrees. Any suggestions for this issue?

@madbackyard Год назад

I would think the heat deflector would help solve this problem because you’ll have less hot air getting sucked up and to the left out that gap. If not you could also try one of the 3-window flame tamers they offer and point the window to the right side. That’s what I would try. Thanks for watching!

@Jo060 Год назад

...Did you not watch the video?

@kenjustice5388 8 месяцев назад

Great video, as always! Will these two mods fit the latest Pit Boss Pro Series 1600 ... PB1600PS3 ? It's not showing any fitment on Amazon and showing over a month to receive to AZ??? I think someone mentioned it fit the 1150. Always great content and your wife does a great job on these videos and on her channel. My wife enjoys her channel as well. 😊👍👍

@madbackyard 7 месяцев назад

Thanks Ken. I believe they do. It’s the 850 models that aren’t curved and don’t necessarily need them. I am using the 1150 in this video. Yes they’ve been incredibly popular since we published this video so they frequently go out of stock on amazon. Just keep checking back. Thanks!!

@oysterphish7516 3 месяца назад

Did this end up fitting your 1600

@bryanolsen515 2 месяца назад

Mixed mine by buying a Rec Tec!!

@mattmessick3812 Год назад

Thanks so much for the video! Just ordered the mods. They see you have after market grates. Do you like those? And if so, where did you get them? TIA!!

@madbackyard Год назад

Hi Matt- No they are not aftermarket. These are the type of grates Pit Boss used to include until recently they switched to straight style grates. The ones I have look cool but can be a pain to clean so I’m guessing that’s why they made the switch.

@shanemorris3208 9 месяцев назад

Matt can you please tell me what the dimensions are on the flame tamer, I think I can just make one .

@5.56JMAY Год назад

I also see on their website that they have firebox mods with 3 and 4 window options. Wondering how these would compare to the original

@madbackyard Год назад

Yeah I saw those recently too. I may try the 3 window one to help direct more heat away from the left side which tends to get hotter with the flame broiler being closer to the grates on that side.

@tonymo4138 Год назад

@@madbackyard I did testing before and after the diffuser. I ended up being within 30 or so degrees across the grill. I contacted Smoke Like a Boss, and they suggested the 4 window. I tested afterwards, and with the exception of the edges, I'm say within 10-15 degrees across the grates. The only thing I've noticed now is that due to the Flame Tamer, my temp runs a bit under the probed temp, so I end up cooking slightly hotter.

@timothywagner9878 10 месяцев назад

Thanks for the video and sharing your knowledge. I just got the heat defuser. Do you think I need both the heat defuser and the flame blocker? I have the 1150 plus Pit boss. Thank you again for sharing

@madbackyard 10 месяцев назад

Heat diffuser will help with your overall temperature accuracy issues (what display says vs what temp the pit is actually at). But you will still have a hot spot over the firepot without the flame tamer. Just try cooking for a couple weeks and see if it bothers you you can always order it then. Another option is to put a pan of water in the center and cook food on the top rack. But this can be kind of a pain to do every time. Let us know how it goes, thanks for watching!

@timothywagner9878 10 месяцев назад

@@madbackyard Thanks for the advice I see a big improvement on my temps with just the defuser. I’m doing a chuck roast. I’ll go ahead and order the flame blocker and then the temps should be really close

@madbackyard 10 месяцев назад

Awesome, good luck with the chuck roast!!