We tried FIRE and a BIG HAMMER. But the Rudder Would Not Move | Sailboat Repairs Ep 371

Подписаться 62 тыс.

Просмотров 8 тыс.

50% 1

We threw fire and hammers at the rudder, but it wouldn't budge...
Watch Rudder Removal Part 1 first...
"The Most Challenging Boat Repair of All Time?"
• The Most Challenging B...
If you want to be sold health drinks, wellness apps and mental health products, you will be disappointed. We have NO sponsorship and NO promotions on @followtheboat just videos and podcasts to entertain, inform or pass the time.
If you enjoy what we do, please like and subscribe. And leave us a comment, we LOVE hearing from you.
🥰 Do you like our work, or are you the generous sort? Chuck us a £, €, $, or even a ¥!
💳 Patreon/FTBMate - followtheboat.com/pub/
🥃 FTB Rum Fund - followtheboat.com/pub/
💰 RU-vid's SUPER THANKS! ☝️
💬 Join our DISCORD community (it's FREE)! We chat about all things sailing, travel, photography and, of course, FTB. If you've got a question, DISCORD is the place to leave it.
/ discord
00:00 Disaster: "the rudder is broken!"
00:34 Fire & Hammer
02:37 Liz learns the truth
03:40 Jamie has a theory about our skeg
05:17 Sanding begins on the skeg
08:03 Epoxy repair of the skeg
Thank you for watching! Please COMMENT, LIKE and SUBSCRIBE, it helps us get noticed.
Peace and fair winds!
Liz and Jamie
💡 USEFUL EPISODES:
🎞️ HOW TO BUY A BOAT Pt 1
• How to Buy a Boat | Be...
🎞️ HOW TO BUY A BOAT Pt2
• How to Buy a Boat | Be...
🎞️ 5 REASONS NOT TO BUY A SAILBOAT
• 5 Reasons NOT to Buy a...
🎞️ HOW WE STARTED SAILING
• How we started sailing...
🎞️ 5 REASONS YOU SHOULD BUY A SAILBOAT
• 5 REASONS WHY YOU SHOU...
🎞️ HOW MUCH TO SAIL AROUND THE WORLD?
• How much does it cost ...
🎞️ ARE YOU TOO OLD TO SAIL?
• Are you too old to sai...
🎞️ THE BEST SAILBOAT TO SAIL AROUND THE WORLD?
• What is the best sailb...
🎣 Liz's Top 3 Sailboat Fishing Tips
• How to catch fish on a...
USEFUL PLAYLISTS:
🎬TOTAL REFIT SERIES - • TOTAL SAILBOAT REFIT: ...
🎬VIDEO PODCASTS - • Video Podcasts | Casti...
🛒 FTB MERCH
followtheboat.com/shop
😊 LET'S CONNECT!
FB - / followtheboat
Instagram - / followtheboat
Twitter: / followtheboat
🎹 All Music from Epidemic Sound
www.epidemicsound.com/
@epidemicsound
⛵ OUR SAILBOAT
@oysteryachts
SY Esper is a 1989 Oyster435 cutter-rigged ketch
🗺️ LOCATION
Medana Bay, Lombok, Indonesia - 8°22'00.3"S 116°07'46.7"E
📡 FOLLOW US IN REAL-TIME WITH AIS
www.marinetraffic.com
MMSI - 235026188
#skegrepair #boatmaintenance #sailing

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@johnq.public2621 3 месяца назад

Oh yes Jamie, I know all too well the unfettered joy of breaking something loose! 😁👍🐻

@followtheboat 3 месяца назад

😁👌

@davidupton4730 3 месяца назад

As a tradesman I wouldn’t buy anything but Makita, In 35 years they have never let me down and I have worked these tool hard.

@nooneanybodyknows7912 3 месяца назад

I echo others' sentiments and joy when finally you get it. Whatever IT is. Joy and elation. 💪

@followtheboat 3 месяца назад

It was a most joyous occasion 😊

@koosstoffels3197 3 месяца назад

Jamie, nobody has ever told you about teredoworms ? Look at the early video's of sailing Yaba . A wooden schooner in Brazil After 3 years rebuilding they will soon splash. Tip : find a shipwright with a chisel and a block of purple❤

@followtheboat 3 месяца назад

I had to look teredo worms up! I still don't understand how it's possible to get to that piece of teak though. It is encapsulated in fibreglass, filler, epoxy and paint. None of it is exposed 🤔

@onawhim9079 3 месяца назад

Oh no tool wars!! I use Makita every day for work and in my experience they are top quality, and very reliable. Certainly worth the extra cash. Good job getting the rudder off, that looked painful :)

@followtheboat 3 месяца назад

My Makita cordless drill and screw driver are still going strong after many years on board 👍

@bryanwatt9751 3 месяца назад

Jamie, young man. You need to learn when not to joke with the admiral! ;)

@followtheboat 3 месяца назад

What's great is that Hendro likes a joke too 😁

@jonjon-jd6vt 3 месяца назад

BUT the other reason it's so hard to remove is because your rudder is putting angled pressure on the downward force. Thats a weight of 0 and 80 degrees forced on one side from the rudder putting pressure on the pin. Suggestion. relive the weight of the rudder, (prop it up) slowly decline the weight as the assembly drops.

@followtheboat 3 месяца назад

We tried that early on. Actually, there's quite a bit we didn't get on camera, like the failed attempt to use a heat gun due to the yard's poor wiring. Turns out the heat wasn't hot enough.

@Andre-yu3qs 3 месяца назад

Thanks for sharing.

@followtheboat 3 месяца назад

Thanks for watching 😃👍

@poepflater 3 месяца назад

A decentish sander should have a flat plate with little spikes on. this is for puncturing the sanding sheet once it is installed so that it can suck dust out from under the sander. you get additives to make exposcy and polyester more sandable... the latter uses a wax based one.. We made paper weights casting in that cap of a spray can as a school project in 6th grade... mine had watch parts inside

@williambunting803 3 месяца назад

Until that came apart it was difficult to see this weird construction. While you have it apart in might be an idea to drill for M25 and tap the holes so you can use one or two bolts to pull the casting down off the skep. It is an oversight that they did not have made provision for that.

@followtheboat 3 месяца назад

We considered doing this but honestly, this was all down to that epoxy.

@carltontweedle5724 3 месяца назад

That looked like a total nightmare. Is there anything you can do just on the off chance that dam thing needs to come off again. Because if you need to no beer left for me. HAHAHA

@followtheboat 3 месяца назад

We could not use epoxy, or be more conservative when reapplying it 🤔

@dutchglobetrotter4513 3 месяца назад

One thing for sure, that rudder is. not going to fall off by itself.

@followtheboat 3 месяца назад

That is my hope 😅

@jeromehebert3184 3 месяца назад

Man, 5 weeks.. what a pain in the .... good luck with getting it done,

@followtheboat 3 месяца назад

Biggest pain the... ever 🤦

@TheGlynJones 3 месяца назад

Love your vids

@followtheboat 3 месяца назад

Thank you 🙏

@NortyNige 3 месяца назад

I would have thought going to yacht manufacturer would have been a good starting point?

@followtheboat 3 месяца назад

I guess you missed the last episode, Nige 😉 Hope you're well 👍

@bobhamilton298 3 месяца назад

Can also hit resin with a heat gun to remove bubbles. They do that with poured table tops.

@followtheboat 3 месяца назад

I'll remember this for any future big epoxy job, Bob 👍

@scottgenius9189 3 месяца назад

Hire a Enerpac hydraulic wedge splitter and combine with heat

@followtheboat 3 месяца назад

It's a good idea but there's nowhere to get purchase from both sides as the skeg is made of fibreglass.

@sailingsomeday5975 3 месяца назад

Hi guys! Congrats. For next project - I wonder if a heat gun would help with bubbles like they use on epoxy tabletops….perhaps this only works on certain epoxy formulas??

@followtheboat 3 месяца назад

For this project it didn't matter but it has been mentioned a few times and is worth bearing in mind for my next tabletop project 😉 I think those wood turners use polyester resin, not sure if that makes a difference?

@jimmyhvy2277 3 месяца назад

Boat Maintenance in Exotic Marinas .

@followtheboat 3 месяца назад

It may LOOK exotic but it's probably the least equipped boat yard we've been in. Can't even run a 1200w power tool without the circuit tripping 😅

@SailingSteelSapphire 3 месяца назад

Woo-hoo! Such a satisfying feeling. Marred only slightly by not having the camera rolling for the actual moment! 🙂

@followtheboat 3 месяца назад

To be left to your imagination 😅

@SailingSteelSapphire 3 месяца назад

@@followtheboat As is the thought of Jamie doing a nude lap around the boatyard to celebrate his joy and relief 🤣

@BrianM0OAB 3 месяца назад

I have a vacuum pump for doing resin pieces ( scales mostly ) but an idea I've had may get some bubbles out is to use a strong enough container that won't collapse and a hoover, never tried it but who knows it might just work ?

@followtheboat 3 месяца назад

Good tip, Brian, although when you see this piece in its final resting place the bubbles will never be seen again 😅