WE'VE GOT HOLES IN OUR BOAT Ep 353

Подписаться 131 тыс.

Просмотров 41 тыс.

50% 1

Heading into the boatyard... www.sailingnandji.com
We have hauled out to complete 3 major jobs before sailing across the Indian Ocean. The mast is out, the deck overhaul has begun and the third BIG job is discover what is happening below the waterline.
When we first bought Nandji 2, we had limited time to get her out of the country and therefore we slapped on some antifoul after completing an interior refit and went sailing. But what is the state of the hull?
Is the hull integrity compromised?
What secrets is the paint hiding?
Do we have Osmosis?
Time to blast it all off and start from scratch.
Yacht Blast - +66 082 763 0516
Instagram - @yachtblast_phuket
Facebook - Yachtblast Phuket
#boatlife #sailing #sailingaroundtheworld #cruisinglife #sailor #thailand #sailingfamily
Support us here ❤️
Patreon: / nandji
Paypal: www.paypal.com/paypalme/Saili...
Merch: sailingnandji-shop.com I recommend the coffee mug 👌
Socials and all the other places you will find us🤘
Facebook: / sailingnandji
Instagram: / sailing_nandji
Website: www.sailingnandji.com
SUBSCRIBE to our Newsletter on our website for updates on our adventures!
SUBSCRIBE TO OUR CHANNEL. 👌 / frothlyfesailingnandji
CLICK THE BELL to know when NEW Nandji videos are up!
💫 Shop Bonitas Look - www.shopltk.com/explore/Saili...
Cheers legends!
If you enjoyed this video, Click the link below and view it again! 👇👇👇 Yew!
• WE'VE GOT HOLES IN OUR...

Опубликовано:

21 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@barryspiegler8395 Месяц назад

Love you guys. Two things. Next time use a light color, black promotes growth and if you paint three top coats, paint the 1st top coat a different color. That way when you get to that color again down the road you know it's time to paint again.

@murphyrp01 Месяц назад

So happy your guys channel is going well enough that you can afford to get this done. It must have been heaven to realise that you didn’t have to sand back yourself and do all the painting yourself. What a job that would have been.

@creativecutter Месяц назад

Great Episode! There is nothing like the piece of mind that comes from a job done well.

@davidc6510 20 дней назад

Hello Legends!!! What an amazing job done on Nandji's bottom by YachtBlast. Such a night and day difference in the quality of the bottom paint and the prop speed application. Another great video and Thanks for Sharing! Yew!

@californiakayaker Месяц назад

When you factor in the less time in the yard its a win win. Great Job !

@SUDDSCREW Месяц назад

Them boys are no joke they know there business.

@christopherjacques9658 Месяц назад

Costs on soda blasting are running $3k+ average in USA on 40’ boat, time to do some grinding, filling and fairing. A proper epoxy barrier coating, fresh bottom paint and you’ll be good to go. 👍

@darrenykema979 Месяц назад

What a sensational system and the amazing result. Yeah baby

@jamieblack9349 Месяц назад

I really like when you do videos like these. Great video thank you.

@luvinlife2887 Месяц назад

That’s the way to do it! It’s how we hope all service provider’s approach their deliverable. Best decision you could make was hiring Nigel and Yacht Blast crew! Happy for Nandji-II family. Tallula getting her skateboard legs, priceless! 🤓🥳🤘

@runawaysailing2032 Месяц назад

Good to know that someone in thailand does wet blasting of hulls

@petercroft9895 Месяц назад

When you see some channels spending literally weeks sanding, having 95% of the bottom paint stripped in under a day was amazing. They saving in yard time, food, accommodation, and hassle must make blasting a no-brainer if it's available.

@retiredfederalie178 Месяц назад

It’s nice you’re in a place that allows this kind of paint removal. Where we are, on the NW coast of the US, most yards won’t allow any kind of blasting regardless of the media used. A great way to prep the hull.

@purplemonkeycrazy Месяц назад

Bro that power washing looks like it pretty cool😊

@halfglassfull Месяц назад

Watching this was such a blast!

@kristaready8812 Месяц назад

Way to go Yosh, taking care of the hull is taking care of your family. Love your vlogs. Can't wait to see you back in the water 🤗💞

@Its_me--Boo_Radley Месяц назад

I couldn't watch when your video first popped up ... because I was so afraid that you discovered a major problem with Nandji II. But today after I was finished with my work, and feeling calm ... I decided I could handle whatever it was that you discovered. Whew! What a relief that things were able to be fixed so easily. I was afraid there would be a gaping hole in poor Nandji II. Glad my fears were put to rest. And OMG, she looks beautiful! You guys have done an outstanding job of turning Nandji II into an absolute stunner!

@samcarrs Месяц назад

Blasting is awesome. I used a Festool sander and an Egg shaped DA bit to get the blisters. I also use sealer afterwards before bottom paint. Cheers!

@Div3r Месяц назад

What amazed me was the lack of mess left under the boat. From a health and safety point of view with it being a wet blast there is minimal dust produced for people to breathe.

@bronsont7280 Месяц назад

Absolutely awesome job. Getting work done by someone who specializes in your work always pays dividends!

@shanewalker2018 Месяц назад

Why not dock in Richard's Bay, rent a 4x4 & trailer, buy a comfortable tent, put your dingy on the trailer. Travel north to Ndumo game reserve, go to Kosi Bay, experience SA flat dogs (crocs), Hippos, Fish, Elephants, Bird life, turtles on beaches over Kosi Lake & so much more. Nice trustworthy people up around that area. definitely 4x4 area, less commercialized.

@davidrawles5732 Месяц назад

Now thats great service ,i bet its not cheap but well worth it

@SkylinersYeti Месяц назад

I am a DIY person but some projects are best left to professionals. Pease of mind for your next adventures. Looking forward to watching your travels across the Indian Ocean. Keep up the good work.

@jeremyduncan3654 Месяц назад

Wow! That blasting is the business! Good to get this fixed to have a solid hull!

@dennisreeves632 Месяц назад

WOW! Those guys ROC! Looks amazing! I love the lines on that boat just beautiful!

@purplemonkeycrazy Месяц назад

You should make an aluminum rutter

@jamieweyndling1861 Месяц назад

How much did the whole bottom job cost you?

@billburkart8527 Месяц назад

Hey Josh, the bottom looks great. So nice you didn’t have to do the work. Love your family. ❤

@yachticus Месяц назад

yacht blast have really helped you with the yacht and specifically getting your hull sorted. - thats a pretty amazing investment they have made in their kit. lucky to get access to to it Josh

@IanHobday Месяц назад

Looks great, and great peace of mind!

@danleach6828 Месяц назад

Good job! So much to think about and lessons learned!

@billbaxter2914 Месяц назад

Wow!!! Boat looks amazing.

@thomasthornton5737 Месяц назад

😀😀👍👍👍❤ Fantastic work Yosh. "Peace of mind" below the water line! (even rhymes) Bye from Seattle, WA. (Northwest USA)

@Wally-Douglas Месяц назад

Great insight into a big job, looks great. I will definitely keep these guys in mind

@user-hk2vp7il4o Месяц назад

cruising, fixing yachts in exotic locations

@joephysics5469 Месяц назад

A very nice change of pace video.

@rossmain4142 Месяц назад

That was a interesting interview and run down on blasting.

@deanostevenson9238 Месяц назад

Great variety in this channel

@psystealth Месяц назад

good luck mate

@matthewgray752 Месяц назад

fantastic video amazing to see how was fixed so fast with the right people for the job

@joelabriola2493 Месяц назад

Pride in Ownership!

@beaudwayful Месяц назад

Nandji 2 look sweet! Love the boatwork vids! Can't wait for the sailing!

@anniedecrescenzo2434 Месяц назад

Doing it right, Yosh ❤ awsome job!

@lynda6550 Месяц назад

Glad you found a good team to help you. Always enjoy your videos. Came over when Max was visiting and still here and loving your content. Best wishes from Western Australia

@genieclarke7346 Месяц назад

Saved Yacht Blasts details. Fantastic work

@johnabriggs6044 Месяц назад

Nice to see the progress of the cleaning the bottom and hopeful to see the new rig when that happens. Lookng good 😇

@jeanpierremarais1627 Месяц назад

Nige, Lewis, brilliant job boys!

@8marcrara11 Месяц назад

Good for you guys getting that job done by people that specialise and saving time and your energy for the other jobs🧿⚡️all the best to you all🤙🤙🌺🐝🐸🇦🇺

@tomdunn1254 Месяц назад

I am looking forward to you comming to South Africa. You will enjoy it here. Beatifull country and wonderfull people.

@aaronnunn5240 Месяц назад

How good is that! I'm gonna do it to my Benny Oceanis. And lm still really happy with your boat choice Pal!

@robertnixon3816 Месяц назад

Just another great episode! Love the way you take care of your yacht/home. That investment is going to pay dividends for years to come. So proud of you all for going the extra mile and doing it right! And besides all that Tallula is learning the skateboard! Win, win, win!!😁👍❤️❤️❤️

@jonathanscott550 Месяц назад

Nice one Josh. I think you are ready now to face the cold water, Croc's and Sharks of South Africa.

@dantheman9228 Месяц назад

For her age Yosh the gel coating looked pretty good mate though you were right to take her right back to the gel,man i wish they could do that blasting 30 years ago would have saved me many days on the hard stand lol

@brokenmechanic Месяц назад

good job blinky bill

@bryonschue8065 Месяц назад

Done right

@bishopkinlyside8477 Месяц назад

Hi guys, I’ll be putting some glass over that bow , especially, if you’re going to sail around the world It’s only my opinion and I’m probably doesn’t mean for much. , Cliff from Australia

@FrothLyfeSailingNandji Месяц назад

Hey mate!! Yosh did end up glassing the bow.. it was a quick timelapse of it at the 12:45 mark! Good call

@susandates5375 Месяц назад

Josh, we yust love watching u guys sailing! We are from South Africa, and we are yust smiling about the "crocs and Hippo's, they are not in the sea here, but in the rivers on land😊 we are so pleased your boat is fixed so that your ling yourney can begin!!!❤❤

@FrothLyfeSailingNandji Месяц назад

Our friend had a hippo under his boat in Richard’s bay and has our imagination running wild 🤣

@josedasilva9658 Месяц назад

Yeap, Zululand yacht club is well known for the resident hippos popping in for a visit every so often.😮

@susandates5375 Месяц назад

Never knew that they go to the sea!!! Tnx for that very interresting😊

@TheJeffrey575 Месяц назад

Do you use millage gauges to insure the coatings are evenly applied? In a past life I had to make sure coatings were overly thinned resulting in poor performance or a coating failure that then results in damage the coatings are intended to protect. I just didn’t understand if millage was an important measurement.

@oliversmith9756 Месяц назад

Why no barrier coat first? Am I missing something? Sorry if I’m being stupid. Sorry the epoxy primer is the barrier. Doh. Great job guys. Love your vid’s.

@usabayermicha6178 Месяц назад

Boat looks great. Wonder what the bottom job has cost in Phuket

@jameskelly5973 Месяц назад

Amazing how new tech has advanced coatings…..we used to put two coats of two pack epoxy undercoat, then the while the 3rd coat was still tacky, put the first coat of anti foul on to make it bond.

@michelebushnik2874 Месяц назад

Oh gosh so good to see this Yacht blaster taking care of you and your safety❤ Did the rudder drain dry? And did you have to refoam? Looking beautiful Yosh and Bonita!❤❤

@drjasper100 Месяц назад

Great episode - I would have been taking that rudder off and find out where the water is getting in.

@FrothLyfeSailingNandji Месяц назад

Found the problem and glassed 👌 it’s not an easy rudder to remove

@markfoster6110 Месяц назад

He has missed his calling .should have been a car salesman . Tim the demtell man 2 .great job !! Even had scoreboard action .. thanks

@shanewalker2018 Месяц назад

We'd scrub the bottom on way out to race, don't fear the water, east cost bugs are tasty, cape abalone, mussels bivalves & so much fish. The fruit is divine, wine is biblical, Biltong & droe" worse!! In spring see Namaqualand Daisies. Watch people watching you, don't go in developed areas you don't know. If in Durban must go to langoustines Sarnia (Pine Town) or by the sea Dbn North have seafood platter, my mouth waters. Enjoy!

@jackrolfson312 Месяц назад

That was very interesting to watch. I did not know that. It took that many layers to put that Back together again. You take care of it. It will take care of you! I noticed in your video. Your daughter is getting so big, Enjoy your time with her. They grow up too fast!

@susandates5375 Месяц назад

That is news to ke!😊 never knew or thought that they would go into the ses!! Very interresting, one learn more and more hey! ,thank you so much fot this info. So, our sailing friends have to be on the lookout there!!! Keep your eyes on the waters you two sailors!!😊😊😊❤

@user-un5el8qz9t Месяц назад

Love seeing you guys.. ...in the zone...

@vivanasperen3339 Месяц назад

Try anti cover using one with cayenne pepper infused paint. Seems the sea creatures don’t like to taste works just fine and is newly popular on boats

@juicychills7546 Месяц назад

AS a paint and blaster it's great to see some Pro's in Thailand that know there shit, Theirs nothing better than getting true pro Paint and Blasters to to give your vessel a great job because we understand profiles and our work. Yes it may cost a bit more than your DIY but they QA there work.

@susandates5375 Месяц назад

I'LL believe you!!😂 one cannot underestimate thosr beasts!!😂😂❤❤

@huey090806 Месяц назад

Dude go to South Africa Sept. To April it is Summer Time . July and August you will have blue balls because it is a dry cold

@jazz1on Месяц назад

What work did you need to repair the rudder?

@Lana_Warwick Месяц назад

Cost for that job in Thai would have been interesting. Prop One (Aussie Made) is ~ 1/2 the cost of prop speed. Alternate colour AF is good for wear indicator

@FrothLyfeSailingNandji 13 дней назад

We drove around for days trying to find Prop one .. everyone sells it but no one had it in stock.

@ianprice2298 Месяц назад

A very valuable process! But someone needs to invent an anti-foul paint that does what it says.

@Q_The_Rabbit Месяц назад

Yosh is a tad lacking in the stoked dept.😅

@shanewalker2018 Месяц назад

Say Hi to my beloved country (sans politics), best waters in the world! nicest people too (careful). visit the game parks in Natal, garden route. We have more species of flowers than all other countries combined!

@user-dx8cx3mz4n Месяц назад

No hippos or crocs in Cape Town..😂😂

@niamhfitzgerald2163 Месяц назад

Hey guys unless you are planning to go on our rivers and inland waterways crocs and hippos will not be an issue here! Looking forward to seeing you real soon. Safe sailing.

@FrothLyfeSailingNandji Месяц назад

Our mate had a hippo under his boat in Richards bay .. our imagination has run with it lol

@mentonish Месяц назад

As they say many hands make light work.

@brianvandervlugt8092 Месяц назад

How much of the rudder did you have to grind out and fill?

@TrenchTrash01 Месяц назад

Im glad you hired people for this task, you've worked so hard for so long. Her bottom is gorgeous 😂

@rvrebel2209 Месяц назад

Hello. Great information video, a well worth watch for any boat owner. How old is Nandji II. And why black finish paint on the hull. ?

@FrothLyfeSailingNandji Месяц назад

Nandji 2 was launched in 93! Why black? cause pirates are pirates

@QWTrucker Месяц назад

Will you need to blast the haul every time you haul out ? Or will you just need to take the top coat off reapply the antifouling then top coat?

@FrothLyfeSailingNandji Месяц назад

No need to blast for years to come!

@jmtiptonengland Месяц назад

What are the four rectangular recesses on the hull near the prop shaft Skeg, do they stay like that or are the filled in !!!

@FrothLyfeSailingNandji Месяц назад

Anodes

@greenstaraz Месяц назад

How do you buy a boat in this condition ?

@FrothLyfeSailingNandji Месяц назад

Some things are worth fixing up and we have the drive to do it!! 5 weeks until our Indian Ocean crossing .. it was worth it!

@faircompetition1203 Месяц назад

What does the owners association say about the water in the rudder ? I fear crevice corrosion

@FrothLyfeSailingNandji Месяц назад

As the boat sat on the hard for a few years, the water would be from the last year 🤞 hoping internally it’s not mush, but the glass is an inch thick. Found the water ingress source, ground back and glassed. No w install a hydrovane as back up!

@faircompetition1203 Месяц назад

@@FrothLyfeSailingNandji As long as there is a back up . I have seen what appears to be a fine rudder have the SS web rotted off inside and fail . It is not the glass you need to worry about but the web welded to the shaft that is inside and allows the shaft to turn the fiberglass rudder without just spinning inside . One back up I saw a guy do was to put a hole in the trailing edge of the rudder so a rope could be tied to it to steer using the winches if the steering gear fails (or the web) . Not ideal , but at least you can steer .

@mattschaal5578 Месяц назад

Wild guess 18000.00U.S. for the job. Are you not going to surf in S.A. because of Hippos?

@FrothLyfeSailingNandji Месяц назад

😂 no hippos in the line up

@simonhantler8062 Месяц назад

shoudlve sprayed the antifoul on

@FrothLyfeSailingNandji Месяц назад

I don’t like thinners in my antifoul

@Island_Times Месяц назад

This is prolly a really dumb question, but has anyone tried ceramic coating a hull ? Like in an automotive coating ?😮

@davesheffield3620 Месяц назад

What about a wrap 😮😉

@Island_Times Месяц назад

@@davesheffield3620 I'd actually discounted a wrap due to potential moisture traps. But I like the idea of several layers of peel off like on F1 helmet visor. Just not practical.

@Anne6621 Месяц назад

Boat Owner - i painted the bottom of my boat and the paint sucked i will never use that garbage paint again , it all peeled off in a week ,, Paint Store - interesting , did you prep the bottom properly and follow manufactures instructions , , Boat Owner - what does prep mean and there are instructions ?

@janaferreira8882 Месяц назад

Lol we dont have Hippos and Crocs all over, South Africa. Only some small parts are they in the ocean. But we ride the Hippos here thats how we roll here in SA. 😂😂😂 Just joking about the rideing the Hippos.

@FrothLyfeSailingNandji Месяц назад

Our friend had a hippo under his boat in Richard’s bay and it’s got our imagination running wild! I thought all South Africans ride their pet zebras to do the grocery shopping? 😂

@janaferreira8882 Месяц назад

We saw a few on easter weekend at Jozini here in KZN. But was inland. Where in SA are you guys traveling to? Safe travels!

@stefanieobermeder2065 Месяц назад

The Cruising kiwis chucked a syringe of ivermectin in their anti foul, and it went great guns!

@MaMa-st2eg Месяц назад

Amazing ......It went from a pimply pitted teenager hiding a water pocket to a shiny smooth babies ass!!! I am NOT a sailor but the confidence you must have knowing the condition of your hull and the protection you put on it, must help you sleep good at night. Beautifully done and thanks for explaining everything...

@dennispatrick4999 Месяц назад

Too busy to clean the bottom? WTF

@FrothLyfeSailingNandji Месяц назад

Yes! The deck took us 3 solid weeks of work which will be coming up in our next video. We are pushing to a schedule to cross the Indian Ocean with a lot of other jobs going on and made the right choice in getting help with the hull!

@Stenn333 Месяц назад

So they're not vaccuuming up their medium and your own anti-fouling paint ? Where's it going ? 😱 I've got to do the same thing on my new-to-me '96 Kelsall 36 Suncat....barrier coat is peeling right off...somebody didn't prep the fiberglass...gotta strip 36'x2 with grinders....because it's a foam core with fiberglass skins inside and out....I think blasting would be too aggressive (and nobody does it around here...Florida/Georgia, U.S.) 😱 Both my keels were full of water too

@FrothLyfeSailingNandji Месяц назад

The guys did an amazing job cleaning up after the blasting!! You can see how clean it is around the boat. All of the sand was swept up and taken away for disposal. Hope you can find dustless blasting in your area!

@dazfromnz01 Месяц назад

Or you could just get your own channel mate.😢😢

@seankennaway10 Месяц назад

This has turned into a boat repair chanel and woe-is-me production. Zzzzzzz

@FrothLyfeSailingNandji Месяц назад

Can’t have the sailing without the boatwork! It’s all part of it. We are preparing the boat for a year of sailing across the Indian Ocean.

@njbaskipper Месяц назад

Good night.. Remember that sand blasting may not seem like it, but it opens micro pores in the fiber, you will have to recover that gelcoat that is visible. You are doing a very good job. All the success in the world, you got out of the water on time. 🔩🔧🔨⚒️🛠️⛏️

@FrothLyfeSailingNandji Месяц назад

The entire boat was filled and faired. Cheers

@njbaskipper Месяц назад

@@FrothLyfeSailingNandji 💯💯💯💯💯💯👌