Webasto Coolant Heater Install | 1st Gen Cummins

Подписаться 13 тыс.

Просмотров 8 тыс.

50% 1

Today I show you how I install a Webasto Thermo Top Evo hydronic coolant heater into my 1993 Dodge w250. So far I've been loving this Webasto heater and it will definitely come in handy for future winters with this truck!
If you are interested in purchasing a bracket for the controller please reach out to me at my e-mail below.
Stay tuned for more videos!
Tyler,
*************************************************************************************
SUBSCRIBE:
ru-vid.com?...
*************************************************************************************
SHARE THIS VIDEO LINK: • Webasto Coolant Heater...
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO:
Webasto Part Numbers for Thermo Top Evo with SmarTemp 3.0 Controllers:
SmarTemp 3.0: 5013919A (This is the one I installed)
SmarTemp 3.0 Bluetooth: 5013920A
Plastic Welder (Amazon.ca): amzn.to/3KIZaWk
Plastic Welder (Amazon.com): amzn.to/3YcjlPw
Plastic Welder (Princess Auto): www.princessauto.com/en/plast...
The best deal I found was going through my local international parts dealer (Harbour Int'l in Vancouver) and they shipped direct to my door.
**************************************************************************************
CONTACT ME:
E-Mail: tylerovens@me.com
**************************************************************************************

Авто/Мото

Опубликовано:

27 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@brcron007 5 месяцев назад

I just re-watched this. Tyler you really are an amazing individual, you really are ! 👍👍👍👍👍

@David-tp7un Год назад

Awesome install. Can't wait to upgrade mine!

@stuartshogren8308 6 месяцев назад

Awesome video thank you

@usewhatyouhave6975 10 месяцев назад

Thanks, just bought one and about to do the install

@OvensGarage 10 месяцев назад

Good luck! You'll love it.

@LifeofBrianLoB Год назад

Awesome Job, can't wait to do mine this summer. Looking for a follow up on the install.

@Xenomorphd 10 месяцев назад

Nice job on the fitting in the tank

@kellymichael7362 Год назад

That's a pretty sweet set-up, and detailed install. Sure am glad that I'll never need that here in Texas. Just hearing those "-" numbers gave me a chill, and it's 84 degrees outside. I enjoyed watching the process you did, though.

@OvensGarage Год назад

Yes it sure will come in handy! Looking forward to needing it but not looking forward to the cold temperatures 😄

@ram_diesel_power6039 Год назад

I’ve installed plenty of them on big rigs. On my 93 I installed two 1000 cca batteries in the same spot were the one battery was. I run t6 synthetic in the winter. In Maine USA I’ve started my truck in -36f without plugging it in. I just cycle the intake heater 3 times.

@OvensGarage Год назад

It doesn't draw a ton of battery power, but I was thinking about mounting a stand alone battery on the frame dedicated to the webasto and dash cam. It's nice having instant heat though

@ram_diesel_power6039 Год назад

@@OvensGarage we use them on big rigs all the time. They use way less fuel then the conventional apu’s. I’ve installed the coolant heaters and the forced hot air ones.

@brcron007 Год назад

Cool upgrade

@OvensGarage Год назад

Thanks!

@matthewjames4268 4 месяца назад

finally got mine for my diesel landcruiser in calgary. Im going to try and install with a separate fuel tank.

@decentgarage Год назад

Awesome video Tyler! This was the first install I ever did on my truck. It's intimidating but pretty basic. Nice hat I saw a few times. Wait till you have people asking why you truck is smoking as sounds like a fighter jet! 🤣

@OvensGarage Год назад

The Decent Garage hat has pretty much become my work hat at this point ;) The Webasto is surprisingly louder than I thought it was going to be, gotten a few looks already sitting in some parking lots.

@cph3459 6 месяцев назад

Great video, I think I would have sourced a small fuel tank instead of going to the work of dropping the tank. but no matter. So I understand coolant flows from the heater into the core then out and into the head?

@mutantryeff Год назад

Nice

@ModernMillwright Год назад

Looks like you have the rear main or tappet cover leak. Oil on drivers side points to tappet cover. Nice install. I've thought of one of these but couldn't justify the expense when I usually have electricity to plug into.

@OvensGarage Год назад

I'll have to take a look. I also spray my truck annually with rust check so that may just be remnants of that oil spray and not a leak.

@ModernMillwright Год назад

@@OvensGarage oh. That makes sense. It just looked like regular old oil.

@usewhatyouhave6975 9 месяцев назад

I did the install on my 91 w-350. It worked fine for a few cycles but now keeps giving me an overheat code and shutting down. I have purged all the air from the system and even installed a flushing T on my heater line to make sure all the air is purged. Anyone have any ideas?

@howardhudson7214 Год назад

Just remember the fuel supply on those are tiny. It dosen't take much to plug the fuel line. So you need to treat the fuel so there is no gelling. It may be a good idea to insulate the small line. Just something to think about. I have experienced a plugged line on my wabasto and woke up freezing in the middle of the night.

@OvensGarage Год назад

That's a good point. I usually add anti-gel additive every time I fill my fuel tank anyways, but it wouldn't hurt to prevent fuel gelling in other ways.

@howardhudson7214 Год назад

@@OvensGarage if you think how easy it is for the fuel to gel in the tank. Imagine that thin tiny little line. Good luck, this unit should do amazing.

@karlamerika6755 8 месяцев назад

Can you get these in the States?

@mervsroofing8840 6 месяцев назад

Can these heaters be mounted in any position, or is there a specific up and down?

@OvensGarage 6 месяцев назад

Check the manual online. They have several mounting positions I think the only one you can't do is completely upside down.

@usewhatyouhave6975 10 месяцев назад

How is the install working after 6 Mo anything you would have changed?

@OvensGarage 10 месяцев назад

I used it a bit last winter in Victoria but the temps didn't get that low. I'm in winnipeg now and the temps get very cold here so this winter will be the first real test. I'm thinking about changing the feed line to tee in where the coolant sensor is at the back of the head instead so it cycles the coolant completely from back to front. That's the only thing I would change because it would probably bring the temps up higher in the block.

@MrFrodo1111 Год назад

Would love a link to that plastic welder Please?

@OvensGarage Год назад

I just updated the description to include the link. I got mine at princess auto. They don't seem to have the butane powered ones on amazon.

@Allornothin12v Год назад

what do you think about ebay turbo hx35s??

@OvensGarage Год назад

I wouldn't, I would rather rely on a reputable turbo company who doesn't use cheap knock offs with deceiving measurements.

@Ran9erJo Год назад

Why don't you just leave the truck idling over night?

@OvensGarage Год назад

Good thinking

@Ran9erJo Год назад

😂😂

@bcbloc02 Год назад

I would think having the hottest water in the block coming in as the feed to the heater would not be ideal. Guess it still works!

@OvensGarage Год назад

Yep it seems to be working well so far. If it doesn't heat up that well when I experience very cold temps I'll re-plumb the feed to come from the coolant sensor port on the drivers side rear of the engine cyl head