No video :(

Webasto Coolant Heater Re-Plumb | 1st Gen Cummins

Подписаться 14 тыс.

Просмотров 1,2 тыс.

50% 1

Today I show you how I re-plumbed my Webasto Thermo Top Evo coolant heater in order to make it more efficient in heating up my engine before driving my truck!
Stay tuned for more videos!
Tyler,
*************************************************************************************
SUBSCRIBE:
www.youtube.co...
*************************************************************************************
SHARE THIS VIDEO LINK: • Webasto Coolant Heater...
*************************************************************************************
SHOP OVENS GARAGE MERCH: ovensgarage.my...
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.COM):
5/8ID Heater Hose: amzn.to/47IHB1w
3/4"NPT male to 1/2"NPT female: amzn.to/3Gy49pr
1/2"NPT street tee: amzn.to/416fqHa
5/8"ID Hose barb to 1/2NPTmale: amzn.to/47D7fV7
1/2"NPT male pipe plug: amzn.to/3GqgRGP
Coolant sensor replacement: amzn.to/4a0Vt8L
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.CA):
5/8ID Heater Hose: amzn.to/480WXxX
3/4"NPT male to 1/2"NPT female: amzn.to/47ZI8vD
1/2"NPT street tee: amzn.to/47YavtX
5/8"ID Hose barb to 1/2NPTmale: amzn.to/47HBCd4
1/2"NPT male pipe plug: amzn.to/47CjTnm
Coolant sensor replacement: amzn.to/3Rqncbv
**************************************************************************************
CONTACT ME:
E-Mail: tylerovens@me.com
**************************************************************************************

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@brcron007 6 месяцев назад

Keep us posted on how well it works. Great content. I like your new indoor shop 👍

@smaksymiv4950 5 месяцев назад

I intend to run a wabasto coolant heater on a heui motor . I believe that I can modify an oil pan as a heat exchanger off of the webasto exaust & I wanna set up a thermo switch to run my fass pump to keep fuel from gelling up (keep it running thru that nicely warmed engine block .)

@TheRoyalBavarian 9 месяцев назад

Aleays enjoyed your videos on our trucks. Professional. Your workshop is looking good.

@OvensGarage 9 месяцев назад

Thanks appreciate it!

@patrickbeaudoin16 Месяц назад

Keep it going!

@usewhatyouhave6975 9 месяцев назад

I did the exact install as in your original wabasto heater video on my 1990 cummins. It worked for a few cycles and heated the coolant to about the 1/4 temp line consistently (180 thermostat in the truck) -15 / -20c outside temps. but then started throwing overheat error codes and not running. brought the heater into the Wabasso dealer and they say the unit all checks out. gonna throw the heater back in the truck today and try and find the issue.

@OvensGarage 9 месяцев назад

Hopefully it works out for you. Honestly it's been working great for me but I feel like I can get it dialed in a bit better and have the truck run more efficiently in the cold temps.

@so7055 9 месяцев назад

That ought to warm it up better! Good luck. Nice new shop too 🙂

@David-tp7un 9 месяцев назад

Nice job and shop! I had an electric frost heater on my diesel jetta when i was in Winnipeg and without it she wouldnt start. Curious to see how the webasto holds up at -40C.

@redshadow-xc2bu 8 месяцев назад

Do you know if brass causes galvanized rust on cast iron? I don't see many manufacturers using brass fittings. Maybe the material is too expensive. I am doing a heat exchanger delete, wondering to use steel or brass.

@howardhudson7214 9 месяцев назад

My understanding is these factory gauges are not very accurate. I would like to see some aftermarket temp and oil pressure gauges to give you a better idea of what's going on.

@OvensGarage 9 месяцев назад

Yeah I've seen some guys gauges read totally different. I need to get a laser temp reader that might help in the mean time to figure some things out

@Ptbocam 9 месяцев назад

I’ve got a zero start 120V 1500W heater on my diesel scout. 1 hour and the temp is between cold and operating temp. Those Webasto heaters are expensive! 😂

@OvensGarage 9 месяцев назад

Yeah, I'm thinking I need to change out my thermostat because it's probably opening up too soon and the webasto isn't getting it up to temp.

@Ptbocam 9 месяцев назад

@@OvensGarage well Cummins has designed that engine to run with a thermostat that you probably have installed. I wouldn’t replace it. With a block heater and a coolant heater and a pad heater on the oil pan your truck should be good for winter cold starts. If not you may need to look into your grid heater.

@Powerstroke431 7 месяцев назад

DUDE put some plumbing insulation on those hoses. Think how much heat you're losing lol.

@baileymiller546 8 месяцев назад

Great video Tyler I just replaced my coolant temp sensor did you torque yours to a certain spec?

@OvensGarage 8 месяцев назад

I just put some thread sealant on and tightened it up good and tight so it wouldn't leak. No torque spec.

@bcbloc02 9 месяцев назад

I run a 190 thermostat and cab heat works much better.

@OvensGarage 9 месяцев назад

Just ordered a 190 from mishimoto. Does cummins make a 190 I couldn't find any part numbers

@Rodway-qy2fq 9 месяцев назад

Not a ton of help but , I thought I read about a 195 deg one for maybe the VP trucks or industrial

@bcbloc02 9 месяцев назад

@@OvensGarage I used an At22963 from John Deere because it was readily available and like $10 but that was a decade ago. looks like they are about $20 now.

@bcbloc02 9 месяцев назад

Hate to tell you but it was plumbed better before the head gasket is designed to force coolant to flow from water pump to back of block then up into the head and back to the front out thermostat.

@OvensGarage 9 месяцев назад

I'm not sure about that. Doesn't the coolant flow into block then directly up around each cylinder into the head? That's why number 6 apparently gets hotter and people run that coolant bypass.

@bcbloc02 9 месяцев назад

@@OvensGarage It barely flows up around each cylinder they are like 1/8" diameter holes really just to keep air from being trapped. The primary flow path is back the block then up the huge passage in the back right corner then back thru the head to the front.

@WWRT88w 9 месяцев назад

What is your thought/experience on the visor? I have an original Lund that I want to put on my W350. That truck already has a ton of wind noise from the rain lip.

@David-tp7un 9 месяцев назад

I just installed a W250 visor on my truck and I haven't noticed any more wind noise from that area. Most of the noise still comes from my windows.

@OvensGarage 9 месяцев назад

Doesn't make a difference. The biggest thing for wind noise is the window and door seals.