Welding Aluminum With A Hand Held Laser?!: Is This The Future Of Welding?

Подписаться 1 млн

Просмотров 134 тыс.

50% 1

As a follow up to our latest LightWELD XR video, showcasing the handheld laser welding and cleaning, our advisor Chris is back to do some Aluminum welding and testing!
Welding Aluminum is special and thought of as a more difficult process. Watch as Chris uses the LightWELD system to hand weld Aluminum and test the welds! We go through the differences in welding with the laser vs regular MIG or TIG. Have you used a laser? Let us know!
Download the WELD™ APP, join the welding community, find welding resources, check out our member discounts through our brand partners and links to our podcast and social channels here: linktr.ee/WeldDotCom
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Опубликовано:

7 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 250

@larrykent196 Год назад

Another tool in the tool box. Micro LASER Welding my first hands on experience with LASER welding, the whole process is unique yet powerful in it's capabilities and now has a big brother, LASER welder technology is just amazing. You, well done video thank you for sharing.

@josephreagan9545 Год назад

They need to get these machines to some trade schools and community colleges and start teaching students to use them. These are amazing.

@niceguydmm 3 месяца назад

Right so the welder pay will be 15.00 an hour. Careful what you wish for!

@robertnitschke1649 10 месяцев назад

amazing as a welder for over 30 years i can see the benefits .we just got the laser welder at work so checking out the youtube video's on how they work thanks guys

@Ragnar-V Год назад

Very cool. Welding X-ray for 25 years and that’s impressive.

@pieshka4509 Год назад

We had to make some aluminum duct and I ran for this machine to save the spool-gun headache. I got funny looks because I kept rubbing the super smooth outside corner joint that looked more like a 3/16” wide line of soldier than a weld I got it so smooth with the settings

@agler_ 8 месяцев назад

omg the Beavis "Break It!" at 12:20 was spot on!

@Robertmillsjr Год назад

This is awesome!

@slevinshafel9395 10 месяцев назад

6:07 that is why i like friction weld. The high temps destroy the cristals near the soldering path,

@stickyfox Год назад

It took me a few days of a very affordable state-funded vo-tech class to learn to TIG and even stick weld aluminum. You can buy an AC TIG welder for $1000-$2000. Of course, I could have paid ten to fifteen times as much for a welder that doesn't require me to know anything about the process, but I think acquiring the skill to do it with the equipment found in any fabrication shop right now was worth the time and effort, because it makes me more valuable than a machine with a "weld aluminum" button. When we can source a solid-state laser at a reasonable price we'll be in a better place to discuss the future of welding, but remember! SMAW is an invention from the 1800s, and there are welders working today who do nothing else. There's no reason they should cost this much... fiber lasers are also a half-century-old invention.

@AbdulHakim-vk9em Год назад

Fantastic.

@garyschultz253 Год назад

The wire feeder really helped the new guy pick up the pace.

@chewdoobautomotivedetailtm2883 Год назад

Awsome for titanium piping..🔥🔥🔥🔥🔥🔥🔥

@f.k.b.16 7 месяцев назад

What are the gap tolerances? How's it handle welding tube? We have a laser cutter that keeps our saddle cuts (even on two tunes intersecting at an angel) fairly tight...

@TonySopeano46 Год назад

*PLEASE DO A VIDEO EXPLAINING SAFETY GLASSES FOR LASER WELDING*

@sidewinded1 Год назад

pretty neat!

@seniorsanchez2286 Год назад

i would like to know how big of a weld you can produce with this lasergun and if you can do multipass🤔 something like a massive 1g plate and is it faster than stick welding or mig?? and how does it compare in strength to the common welding methods??? please make another video about this welding method and try to weld some thick material, would love to see that😅

@stickyfox Год назад

Laser welders can weld material thicker than 1/4 in a single pass, and do a better job than TIG. What's missing from the equation is the cost of equipment. A 2.5kW LightWELD costs $30,000 and is only good for material up to about 1mm. (Although aluminum welds exceptionally well with Yt and they claim 1/4" material thickness... this is where the absorption of aluminum outweighs its thermal conductivity I guess!) Fiber lasers can run over 10kW and can weld or cut anything if you've got money coming out of all your doors and windows.

@punkinhaidmartin Год назад

It is much faster, and the cost of a 1500 watt full kit is $30, but it is up to four times faster than TIG, faster than GMAW, and there is no cleanup to speak of in terms of spatter. You can reduce a weld to paint process cycle time by up to 80%. If you fasten anything with bolts, screws, adhesive, or use sealants it will save you money very quickly. It also allows you to weld dissimilar metals like copper to stainless, copper to aluminum, and I have welded tool steel to cast steel, though as far as I know, I am the only one that has, and there is scant information on how effective that is. It will also blast right through paint, oil, grease, dirt, and other cruds.

@danssv8 Год назад

Amazing

@convincedag1108 Год назад

I use this whole setup at work. It's a big ass Baby! I weld too and it's nothing like welding.

@fryloc359 Год назад

Is it wire feed? Shielding gas?

@convincedag1108 Год назад

@@fryloc359 gas compressed

@dannypascoemetalshaping460 23 дня назад

Just curious what watt setting are you using and how about .060 3003 for auto body panels can you weld this softer and thinner stuff what wattage might be intrested for my auto custom and fab shop.

@thomasettorre274 11 месяцев назад

That's awesome.

@billarroo1 Год назад

Talking about Space Age Technology, Wow just like "BUCK ROGERS" I like it !!

@everettcalhoun8197 5 месяцев назад

I have tig, mig, stick, oxy-acetylene and laser welded all sorts of different materials. The laser was best at welding the most difficult alloys to join. Narrow HAZ and deep penetration similar to EBW.

@tommyzoladz5905 Год назад

Anyone Interested in Laser welding. Look up the Trumpf TruLaser weld 5000. I work at Trumpf and was blown away by the capabilities when I got hired.

@MidEngineering Год назад

"With TIG & MIG ya can't get a lot of penetration coz it takes so much heat to penetrate into Aluminum because of how dense it is..." Huh ?

@mikewasniewski4048 Год назад

O.K. Here we go again. The pull test was cool but, show us a welded box and how "easy" it is is to get water tight corners. We need to know!

@wwsoft Год назад

Indeed, we need to see a few more practical demonstrations of this newfangled technology

@pieshka4509 Год назад

Honestly I've had issues doing corners on an outside corner joint. Sometimes I get it but usually I need to fill holes with the mig machine and blend it

@Slouworker Год назад

@@wwsoft it's not new at all, they started using it way back in the 90s but invented around 70s

@kalijasin Год назад

@Banana Warrior, you are right. Its Not new. Lasers have been around since the 1950s.

@wwsoft Год назад

@@Slouworker I stand corrected. Maybe it's a cheaper and more common today? I'd be interested in seeing how the applications have changed over time.

@joebidden4914 3 месяца назад

So there's no filler material required to weld with this or does it feed from the machine like a MIG welder?

@tenemax7849 3 месяца назад

no filler, but filler can also be added in laser welding if you have larger gaps or uneven edges

@unibeastbeats 8 месяцев назад

What gases are involved?

@MelloJello894 Год назад

FREAKING LAZERS MAN!!!

@harshbhartia5175 Год назад

Hi, I want to know if round pipes can be weld around to make a truss structure? How will the gaps be covered?

@abdulmalikalgodban6041 Год назад

Perfect weld seam, how much dose such a laser manual welder cost, name of the machine, is it cable of welding other low alloy steels, stainless steel, stainless steels and inconel alloys. Thanks

@hectorrodriguez4864 4 месяца назад

Where can I find the setting for different material thickness.

@brokenarrow2835 9 месяцев назад

What's with the aluminum cover over your shield?

@simkejso5056 Год назад

Where in Canada I can buy that machine. Can I welding Stanley steel and metal with same machine

@RiderRickMaker 4 месяца назад

YESSSS SHARKS WITH LAZ0R BEAMS !!!! That joke will never die! Got myself one, and man, not joking, if you attach this to a galvo you can hypothetically build a DMLS printer ;) It's a form of welding thou... 🤪🤪

@RYTHMICRIOT 6 месяцев назад

My employer purchased one of these. It provides an individual with little to no weld experience the ability to weld parts on par with those who have been doing it for years. However, the cost of the machine (nearly $40k), and the maintenance upkeep it's not quite worth it yet. Our operators have stepped on the guns cable causing it to strike the concrete floor and damage the optics. And the cost of repair is unbelievably expensive. Once the cost comes down over the years, this will be the standard.

@guillaumedutoit5376 Год назад

how strong is laser welding compair with mig or tig welds .Is it better to buy a laser welder than a mig welder

@thetruthserum2816 Год назад

Now someone just needs to invent a "roller head" or "roller tip" that is a powered roller feed dog mechanism to feed the wand at specific feed rates... Seems like a perfect process to attach to a robot arm.

@toastrecon 10 месяцев назад

The crazy thing - I was watching another video that said that the wire feed from the bottom gently "pushes" the gun backwards, so it acts like a pacing/feed mechanism.

@darrinjones9387 5 месяцев назад

They have them in China. The same supplier that the machine came from can help you find one. A six axis robot are

@apollorobb Год назад

yeah 26-30K$ ill stick to TIG and Spool gun

@dangerous8333 Год назад

Give it a few years....

@Migman2020 Год назад

spool gun lololo..

@satibel Год назад

Yeah, though the great thing is that you can basically weld anything with it without sticking, and you go faster and with less material, so for a shop which does a lot of welding it's probably worth the initial cost. Another thing may be that you can get away with less skilled workers, so if you save 10k a year by getting yoounger workers, it's paid itself in less than 3 years Also if you're welding industrially with a 500k robot arm, 500 bucks or 30k on the welder doesn't change that much But if you're in a small shop, getting a cheap welder makes more sense

@trevorthieme5157 Год назад

@@Migman2020 The spool gun is often necessary for aluminum mig welding!

@Migman2020 Год назад

@@trevorthieme5157 decent mig machines can run aluminium wire perfectly fine through the main wirefeed unit even at 10m

@budmanzoom4441 7 месяцев назад

This is the future!

@stuartrowe1079 7 месяцев назад

Think this be any good on cast aluminum ?

@SAXONWARLORD1000AD Год назад

what about when you come to an end , how do you stop it burning away - seems a little more controllable with tig

@dhamre 3 месяца назад

Built in ramp down when you let go of the trigger. Like a pre-programmed foot pedal that doesn't need all the coordination and practice

@user-iz9sb9ql6n 5 месяцев назад

1938 sunbeam motorcycsle primary chaincase which got damaged when I tooked it to be repaired by a very experienced welder the Whole case erupted in cracks all over the place. The welder had not seen anything like it before. Would lazer welding have the same problem

@GemBoyfamily Год назад

Welding masa depan 🤩👏👍

@franks471 Год назад

will it weld zamac (alum+zinc)?

@leeruss979 11 месяцев назад

Can you please tell me, what's is it like doing cast ALUMINUM. I have a job that requires two ALUMINUM castings to be joined. Crankcase.

@fbi805 Год назад

Yea I've looked into buying a few of these for my engineering firms and I still won't pay 15k to 30k for one. I'll stick to Vulcan and or Miller welding systems. At least those are affordable even for your basic metal fabrication hobbyist.

@sextwister Год назад

Look at the other videos where the welds are tested. They go at least 10x slower.

@fbi805 Год назад

@@sextwister you need to learn how to read. Your comment has nothing to do with what I said in my comment.

@darrinjones9387 5 месяцев назад

If one is willing to import it himself, he can get it for about 8000. There's a huge mark up

@ericjackson9047 3 месяца назад

OOOHHH how I wish I could afford one of these machines. Tough to go 20 grand as a hobbyist. Guess I'll just have to dream. :)

@garyschultz253 Год назад

Amazing ! I want one, I'm just $35,000 shy of owning one.

@stephentyas4698 Год назад

can this be used on Stainless steel as well.

@pieshka4509 Год назад

I've used it on black iron, galvanized steel, stainless, and aluminum. Aluminum is the only metal you need to use argon on, the others use nitrogen

@windywaz Год назад

Do they offer any student discounts? Like 99% off discounts? Figured I'd ask.

@danssv8 Год назад

Can you do stainless welding with the same laser welder?

@christopherdemakis5649 Год назад

Yes you can I’m a rep for ipg

@christopherdemakis5649 Год назад

Yes you can I’m a rep for ipg

@ifell3 Год назад

Do you still have to clean the surface?

@chrisewing3272 Год назад

The end result may be better if you do, but in these examples we did nothing to remove the oxide layer in advance. Thanks for watching!

@geoffgeoff143 5 месяцев назад

Be nice to see the pool

@SAXONWARLORD1000AD Год назад

Like the Austin Powers and Beavis references

@ironeyex Год назад

Would have preferred to see close up shots of the actual welding, the camera is too far away to see the actual process

@sextwister Год назад

Its apparently melting the metal with photons. Good luck getting a good close up lol

@kravselj Год назад

tried the 1.5 kw laser welder on full power - 1mm to 3mm test pieces. Works on steel and stainless, on alu it's really hard to get any penetration at all. On stainless and steel it works if there are no gaps and if the laser is dead on corner. If there is a small gap it becomes a mess. You also get some penetration if you go slow enought. Very hard to do repeatable welds. Conclusion: Maybe usable for non constructional serial production welds with perfect fit up on thin stainless for example, but for normal user in no-go. Can't replace tig welding. i't not practical. If you're looking for precise concentrated arc, try manual plasma welding instead.

@Slouworker Год назад

Did you prep your metal properly!

@stickyfox Год назад

Aluminum absorption drops off very rapidly at 1000nm and you need the right doping in your fiber for this particular metal. LightWELD claims 1/4" thickness which I believe looking at the numbers... but for a guy who doesn't own a factory and just wants to make aluminum parts, an Everlast with a decked-out cart full of tools and gases is still less than 10% the cost of a laser welder. Fiber lasers also require thousands of dollars of safety equipment you never see in these videos.

@tomdavis806 Год назад

How do you fill in a hole or large gap ? I’ve only ever seen this Lazer work on the most perfect conditions. Send me one to Wisconsin so I can “garage “ test it

@chrisewing3272 Год назад

Probably not the right tool for filling holes and gaps, but the laser oscillates on the handheld unit, unlike using a robot where the conditions really do have to be very precise.

@cen7ury Год назад

Lots of clipping in the audio, starting in the second section....beyond that, very neat. I'm assuming these laser machines aren't really accessible on a prosumer budget yer?

@joansparky4439 Год назад

I've seen some on aliexpress starting at 3 grand US.. so give it 5 more years and you should be able to get it for 2 grand and 10 years down the road for 1 grand? Biggest problem is the radiation is invisible but way more damaging to your eyes, so proper protective workplace setup will be the biggest hurdle to overcome for the prosumer.

@cen7ury Год назад

@@joansparky4439 I think you're right as far as workplace safety is concerned, especially after reading some of their marketing wank. Work clamp for conductive interlock that only allows the laser to fire when in contact with the work, emergency cutoff switch connected to the door in case someone enters unexpectedly, keyed lockout to prevent unauthorized use (I seriously doubt the cylinder will be uniquely keyed or really much of a security device, but I digress), two-stage trigger (one button to enable, second to fire the laser) to prevent negligent discharge, and so on. Not mentioned was that 1500W is well into class IV laser territory, meaning momentary contact of the beam to your retina, even if the light is scattered or diffused, is enough to cause permanent blindness...and a standard welding hood is not enough to protect your vision unless laser safety goggles are worn underneath. Definitely not for the faint of heart, the forgetful, or those relying on standard homeowners insurance....so yeah, a very niche market, indeed.

@Ghost-lo6ij Год назад

Amazon has a laser welder for $14k This technology is great but is still very expensive, maybe in another 10 years it would become affordable.

@user-dg7sy8cz3b Год назад

Unfortunately in two years, the way the world is changing, you will only be able to lease one for a monthly service fee. Unless something drastically changes soon, private ownership the way you’ve experienced your entire life, will be a thing of the past. Fight for your children’s future! Don’t accept digital currencies or personal identification. Good luck!

@danl.4743 Год назад

Actually between 10-11k for what I saw on some manufacturers websites. $10k for a MAX laser source, $11k for a JPT laser source.

@DrCranberry Год назад

14k for a laser welder?! Dog, in terms of engineering thats insanely cheap. Most shop welders can run between 5-10k for something as basic as MIG or TIG. Not to mention the setting where this is useful is a high volume CNC shop that makes precision parts, which will immediately have the cost off set by the amount they're producing. It's why you hear a lot that manufacturing thousands of parts, is 10x cheaper than manufacturing 1 specific part. Don't get offended this exists, it has very specific purposes and it's not gonna replace conventional welding yet, or at all, and a weld without filler is only as strong as the base metal, so the purposes are more in-line with low stress CNC parts. That being said, it IS very cool to see these becoming more prevalent and talked about because i do think if we can find a way to add filler, this is the future of welding.

@Slouworker Год назад

Tig welders at the shop i work at run for 8k before all the bells and whistles

@kalijasin Год назад

But if you got a laser welder you don’t need a mig welder, smaw arc welder, acetylene torch, tig welder, Gas tungsten arc welder, etc.. because the laser welder will do everything So you actually end up spending less.

@wrench5692 Год назад

Did you see the part where they break the plate and it shears at the weld and they try everything to convince you the weld is just fine

@1bentom1 7 месяцев назад

Also the piece they put in the pull test isn’t the same as the one they loaded lol

@darrinjones9387 5 месяцев назад

The men are correct, the materials break before the weld would. I've done this same thing in my own shop

@alvaroolvera9106 11 месяцев назад

What type of helmet you are using?

@Nightgig 5 месяцев назад

Tig and MIG aluminum welds always needs to be buttoned at the end of the bead else the resulting crack that develops can propagate down the length of the weld over time. I don't see this issue covered in the laser welder video.

@nutgone100 Год назад

I’m waiting for the Chinese to bring the price down on these. Maybe in 10 years I’ll have one. I’m still sore about the price I paid for my AC/DC TIG machine about 8 years ago! Damn those things are cheap now. Don’t wanna make that mistake again.

@larslarsman Год назад

Lincoln tig machines have almost doubled in price in the last 4 years. Imports are a bargain now.

@jameslovering9158 Год назад

@@larslarsman Will Lincoln keep its sales ?

@fbi805 Год назад

@@larslarsman I'll buy a Harbor Freight Vulcan multiprocess pro welder before I pay Licoln their criminal prices

@bskull3232 Год назад

ATM the cheapest laser welder (1.5kW-class) you can find in (not from, e.g. without import tax to any country) China is around $3000, with the full package (laser, hand piece, goggles). If you go higher end, say, you want an air-cooled unit (vs heavy, bulky water-cooled units) with a better galvo scanner gun, an automatic wire feeder, and an argon system, the package could easily triple in price. The biggest cost is certainly the laser diodes, and it is limited by raw materials (silicon, MOCVD precursors, equipment) that the Chinese can't bring down. I'd say don't expect magical price from anywhere. This technology is inherently expensive.

@hotironaircraftshop Год назад

'would like to see an example of working with 0.032" aircraft aluminum.

@justinsousa7624 Год назад

I am a substitute teacher at my local metal fab program and also a member of the advisory board. I have been trying to get a hold of IPG Photonics to try and set something up with them for the students.

@zumbazumba1 Год назад

@@brink666 The future is now old man ! Adapt or extinct like a dinosaur !

@21gioni Год назад

They don’t seem to reply to anyone trying to communicate with them.

@fbi805 Год назад

@@21gioni that's because the only thing they are doing is paid advertisment for a welding system that only aerospace manufacturing companies can afford to buy.

@21gioni Год назад

@@fbi805 I disagree with that

@fbi805 Год назад

@@21gioni you obviously haven’t done your research on laser welders, so feel free to spend anywhere from 15k to 100k on a laser welder and don’t expect the prices to go down anytime soon. Right now laser welding is being used for specialized manufacturing in aerospace and certain automotive engineering. Laser welders are big and bulky and are not easily transportable which limits their use to in shop work only. Unlike regular welders where you can use 110 power or even a generator to operate them, laser welders can only use 220 or 440 voltage and the only generators capable of even having enough power would be those 30Kw or higher diesel powered industrial systems that cost more than a 1 bedroom home

@TheMadJoker87 Год назад

filmed with potatocam 1.0

@mangravy2000 Год назад

Come on Harbor Freight, give us a affordable alternative.

@fanboy59 Год назад

I've only ever heard of this welding process being used into automotive auto body work and its limited to very thin material

@chrisewing3272 Год назад

I can assure you that laser welding in general is already in use in far more applications than you might think. Ford laser welds at least some of their seat risers to their rails in F150 trucks, and those are safety tested as you are strapped to your seat during a crash.

@carpediemarts705 7 месяцев назад

Laser isn't limited to thin. With the low heat saturation, it can weld very thin without blowing holes in the sheet metal. Of course you have to adjust the heat to the thickness of the metal. No need to use 3,000 watts on 18g metal.

@waitemc Год назад

Well this tec can sit on the shelf until it gets a bit more obtainable. I'll keep my tig machines and my wire machines burning until then. Might be ok in a window factory for thin stuff .

@ericjackson9047 3 месяца назад

We're about to start using it on ~0.75" wall 17-4 stainless tubes so I'd say it's not limited to thin (or aluminum) stuff. If you're watching @IPGPhotonics ... need your kit in Rialto yesterday. If you can expedite, please do!

@luisarashirovideo Год назад

This is the present in the aerospace industry atm.

@GaryPierron-ym7xm 7 месяцев назад

Reminds me of Tip-Tig. I hope it's better.

@luvmechanix Год назад

A welding process that is even worse for my eyes?? Sign me up bro

@MarkSkizzoo Год назад

No closeups of the welds...cool

@cen7ury Год назад

Right? PICS OR IT DIDN'T HAPPEN!

@chrisewing3272 Год назад

My bad y'all. I took home a box of the samples we completed that day. No way for me to post pics here, but I'll see what I've got and post closeups in the WELD app.

@dangerous8333 Год назад

@@chrisewing3272 Who needs another app on their phone...

@geonerd Год назад

I have a VERY hard time believing that light 'penetrates' better than electrical current. Please provide a cut-and-etch shot for the thicker material welds.

@felixlemuth1600 Год назад

We do have a lightweld XC and just ordered at XR and i can tell you that its pretty good. The heat effected zone is way smaller and travel speed is also faster then tig

@White000Crow Год назад

Ever seen a laser cutter? My old boss had one and it slices through metal with so little heat discoloration.

@RagingShrimp67 Год назад

What you so call "light" is a laser with thousands, possibly hundreds of thousands of Watts (in pulses). It puts electric current to shame in terms of actual energy penetrating into the weld.

@CamiloSantana Год назад

is your skepticism rooted in the amount of energy carried in either photonic or electronic form?

@pieshka4509 Год назад

You can get fusion welds on outside corner joints with the typical penetration pattern on the inside you'd see with mig or tig, or not have it and the weld will hold. We tested welds with an 8 pound sledge hammer and the metal bends and rips, the weld doesn't break

@genkidama7385 Год назад

i was born to do this.

@kwhited2011 2 месяца назад

The question is does it get the proper fusion of the two metals

@MatHelm Год назад

$26,950.00

@jamiewalters9916 Год назад

The thing I don;t like about the LightWeld setup is that it looks cheap with the old digital readouts. The Chinese machine equivalents look much more robust and have great interfaces. Just my 2 cents.

@cdrom1070 Год назад

lmfao you used "robust". What on gods earth makes you think that the more modern display makes it robust? That is the opposite sign of reliability. Money goes into UI design and computer programming and displays rather then power electronics and power optics systems. Facade. A robust laser welder would have a needle gauge and potentiometer on it. Ah the scam is getting old now, people think its quality because it reminds them of an iPhone. Good way to hide chinese cost cutting circuits. thats my two cents from someone that actually understands the properties of industrial and electronic devices. So the Chinese do better make up, typical. I like the wise decisions companies make, like trading off the purchase of a nice calibrated crimp tool and beefy components from trusted supply chains for sales guys and programmers to wow you with bull shit. I don't know that much about optics but its probobly like "lets use epoxy to glue this on rather then putting a robust shock mount milled ground bracket" and the parallel shenzen mosfets rather then a proper igbt brick. This has to do with people that are totally oblivious to the amount of work that actually goes into doing something right. emi? surges? grounding and transients!??!we dont have those in china!!111

@LJC944 Год назад

Real question is how much is it gonna cost I weld with mig tig and mma and they’re all affordable sets what do the job.

@BigRobFPV Год назад

that pull test isnt the same one they stuck in it first

@michaeld954 Год назад

Does it still need shield gas

@Look_What_You_Did Год назад

What do you think?

@lightmeupsigns5363 Год назад

Perfect for thin stuff weld looks great cosmetically maybe not so good structurally like all processes they have there place

@bl4643 Год назад

I really assumed it would be a weaker weld

@MatHelm Год назад

ZOOM IN!!!!!! CLOSEUP!!!!!

@marklugo6002 4 месяца назад

It seems the regulations are not keeping up with the technology. Lasers are now portable enough to be used anywhere. An enclosure is not.

@ahmemon9683 Год назад

i want to become a welder

@turkeyboyjh1 10 месяцев назад

Am I the only one who thinks tig weld aluminum is easier than steel when it comes to tig welding?

@christianpaulroldan4010 8 месяцев назад

Strength test, definitely not the welded piece you guys did test right there 😅😅. . Dont trick us

@robingibson7503 11 месяцев назад

Can't actually see what is happening at the weld sight.

@xXQuick123Xx Год назад

With showcases like this I’m expecting pinpoint information on the new technology. In the first minutes the company representative says that aluminum is much denser than other metals. This is objectively incorrect and only discredits the claims they make.

@georgeforeman89 Месяц назад

If it were less than $33,000, I would say it’s probably the future. But until the price comes down to, like, $10,000, I would say absolutely not.

@kamujugaapa 23 дня назад

Here in indonesia it's only $6,000 1500 watt fiber laser welding made in china

@raymundoleon9522 Год назад

Cuánto cuesta

@rogerbrandt6678 Год назад

Wow he’s a big boy, 280lbs.

@claycallan8103 4 месяца назад

If the whole point of this is to have more peneration why are they demoing it on thin aluminum? Try welding some 1/2"

@clansymbiont8688 Год назад

I wore a welding helmet while watching this video

@Look_What_You_Did Год назад

and a diaper...

@HoosierDynamics Год назад

All the welders getting mad because this will eventually put them out of business. This will get programmed just like a CNC machine and a robot will perform all the welding and inspecting. Along with it being recorded via camera the entire process. So any faults can be traced back to the exact piece and time to make future corrections. Simple human eyes and hands won’t be able to compete. These machines already out work a human 100:1

@fryloc359 Год назад

It won't put welders out of work. You won't find these in fab shops, oil fields, or jobsites. Production welding is only a small percentage of welding jobs.

@Look_What_You_Did Год назад

@@fryloc359 Ttard.