Welding Stainless Steel Without Trimix On 110/220 V ........... 

Nice one. The more content on the 2200 the better, it has brought my mig game to a level that I never thought possible.

No one seems to test stick on the 2200, but there are situations you would use stick, like 6010 on unprepared materials.

Awesome video. We purchased the Transteel 2200 but we haven't spent a lot of time learning it. Your ss bead profile & color is on the money! I haven't done a whole lot of ss mig. When we did the welds always came out dull using a tri-mix. We don't have access to a variety of gas blends from our local suppliers. We just purchased a Miller gas mixer & we'll definitely try the 98/2% blend. I will definitely stay tuned to your channel!💎💰💳🪙

Interesting info

And I guess nobody told you your lungs can collapse from helium inhalation. But you’re all about the jokes.

You blew your settings with the 308LFC-O. That wire runs DCEP, and you switched to DCEN to run it. Switch the polarity and you will find it welds much cleaner. Also bear in mind the Blue Demon recommends 22-25V and 130-150A setting range on your machine.

great video and information, you mentioned 409 with not much nickel, specs say max is .5%....yep, that makes it a lot cheaper..... thanks for a great video, Paul in Florida

Nice video

E308LFC Flux core wire voltage range recommended is 24 to 31 volts. Wondering why you chose 16 volts ?

New to welding, have a diy project that will need welding on ss kegs. But will also have some cs exhaust piping welding as well. Low budget, any recommendations on what gas I should get for the mig I'll be using? Only have one tank and would like to avoid multiple trips to change gases.

So can you run normal 308L with 75/25? I am trying to butt-weld stainless steel exhaust with 75/25 and (I think) 308L wire and I am not getting the results I would like to have. I'm using a Yeswelder 205DS multiprocess on 220v....

I just picked up a Transsteel 2200. I've got a bottle of 100% Argon for TIG, but I'm not sure I can find Ar + 2-5% CO2 at my local supply. Does anyone have experience running 100% CO2 in MIG on mild steel?

If I'm not mistaken with the flux core stainless you are supposed to run dcep

Let’s do it 💯💪🇺🇸👍

Thanks man, I really appreciate you going over settings and experimenting. You ever try aluminum with 98/2? Hey and also, if I didn't know better, I'd say you swapped out the helium for nitrous in the end......just sayin'.....

Where my location is Superior Welding Supply. Can get me trimix same price as argon co2. 90 helium, 8 argon and 2 oxygen/co2. I will prolly do oxygen cuz it helps a bit more with toeing and allows for short circuit welding to be a bit more consistent

I was wondering what respirator you were using in the video. I’m trying to find a respirator that’s low profile to fit under my welding helmet.

I've got so many questions that I don't know where to start

What would your wire feed speed and amps be for 18 gauge stainless using 98/2 and 308 LSI wire

Didn't you get sugaring on the back side ?

Lmao this is awesome

It completely different then a aluminum. 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️