Тёмный

Welding the Diff in the Off-road Lawnmower | Tecumseh MST-206 

IngenTechNational
Подписаться 2,9 тыс.
Просмотров 1 тыс.
50% 1

NOT a "how-to" video! In this video I take apart the transaxle which is a Tecumseh Peerless MST-206 and weld the spider gears together to make a positive traction rear-end or a live axle. An open diff will go more places than you think, I was surprised but I want to go more places so welding the diff in a "off-road" mower is necessary! I mainly used the FearlessFront video to weld the diff in this transaxle and yeah it worked great! No problems at all so far!
Off-road Mower Playlist: • Driving a Bare Frame L...
(This is a awesome video on how a diff works in my opinion I highly recommend you watch): • Around The Corner - Ho...
FearlessFront Video: • How to: Lock a Trans-a...

Авто/Мото

Опубликовано:

 

7 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@IngenTechNational
@IngenTechNational Год назад
I have no idea why 5th and 6th gears are almost exactly the same, if anyone knows then please let me know because I am very curious. If I had to buy another transmission I would perfer the MST-205 because the gears ratios are more spaced out and just seems a little bit better, especially for the racing mower!
@NubsWithGuns
@NubsWithGuns Год назад
They look the same but count the teeth. I really don't know either, those gears are pretty close together, if i remember correctly(I bet you went oer this in the vid LoL)it's only one tooth different and aobut the same diameter gear. 820 is the one you want to look for imo. 6 speed sequential like a 206 and has 1 inch axles, bigger tires.
@IngenTechNational
@IngenTechNational Год назад
Yeah! I kinda want to go 820 but it is kinda expensive and Idk what kind of lawnmowers come with an 820. Do you know any mowers that come with an 820?
@spudstudios3342
@spudstudios3342 Год назад
@@IngenTechNational any large mower with 12 inch wheels, manual, and 1 inch axles, no lugnuts
@spudstudios3342
@spudstudios3342 Год назад
and 8 inch front wheels
@IngenTechNational
@IngenTechNational Год назад
@@spudstudios3342 Thanks man!
@sambrandt4755
@sambrandt4755 2 месяца назад
That was an incredibly informative video for being made by a high schooler. Great work!
@IngenTechNational
@IngenTechNational 2 месяца назад
Thank ya sir! Just graduated too.
@hydracrypt48
@hydracrypt48 Год назад
Good video!
@IngenTechNational
@IngenTechNational Год назад
Thanks!
@graysonklimczak5775
@graysonklimczak5775 Год назад
If you can find a cheap set of used atv wheels and tires you can use the center section of the original wheels with holes drilled to match the atv wheels pattern. Done it on mine and it’s worked fine
@IngenTechNational
@IngenTechNational Год назад
Alright thanks man!
@graysonklimczak5775
@graysonklimczak5775 Год назад
@@IngenTechNational absolutely, keep up the great work
@TheLonelyCowboy1958
@TheLonelyCowboy1958 Год назад
Awesome vid! I would weld thr diff in my craftsman, but idk if the Hydro can handle that! Either way, great video man.
@IngenTechNational
@IngenTechNational Год назад
I believe Redneck Computer Geek has a video on how to do it on a hydro.
@TheLonelyCowboy1958
@TheLonelyCowboy1958 Год назад
Just might take a look at that! Thanks!
@NubsWithGuns
@NubsWithGuns Год назад
You need to get some confidence Mr. you have had both of those machines about half apart already, you can handle locking the diff.😛 Just need to only weld it where it needs it and careful how much hot you let things get. Ground as close to the work as you also(I pretty much try to do that with everything).
@IngenTechNational
@IngenTechNational Год назад
Ok lol! 😂
@spudstudios3342
@spudstudios3342 Год назад
22s will fit and clear the shifter. I have 22 11 8s on my mud mower and 20 10 8s on the front
@IngenTechNational
@IngenTechNational Год назад
Nice!
@Shorty4808
@Shorty4808 Год назад
Very cool modification! Where did you get the idea to weld lock the transmission? Now that it’s done, do you notice any difficulty turning sharp corners now that the rears are locked? Nice job!
@IngenTechNational
@IngenTechNational Год назад
I got the idea mainly from FearlessFront, and yeah ican tell a difference at turning lol, I might need to upgrade the front tires to a more nobbier tires because turfs are not really doing much. I drove it around a lot more and yeah the front tires slide a good bit!
@Shorty4808
@Shorty4808 Год назад
@@IngenTechNational thanks for letting me know about FearlessFront. I’m going to check him out!
@IngenTechNational
@IngenTechNational Год назад
@@Shorty4808 No problem! I know his videos are like a decade old but I still enjoy watching them lol!
@dogsandwich77
@dogsandwich77 Год назад
Mine dont turn for shit anyway, think ima do this soon. I agree with ya about the gears. I wish it had like, 3. My mom's Troy built has a dam 7 speed. Like what do you do with 7 gears cutting lawns?
@IngenTechNational
@IngenTechNational Год назад
Yeah lol!
@domjoey7514
@domjoey7514 Год назад
Hey man quick question if you lock your transaxle on a chain driven gear box will you loose a few gears. Because I put the gears the same way I found them after I looked them and now I only have 5 gear all forward in reverse
@IngenTechNational
@IngenTechNational Год назад
Usually some of the transaxles have a chain for the reverse, but there maybe some forward as well. I just lock the spider gears on the differential.
@domjoey7514
@domjoey7514 Год назад
@@IngenTechNational same here and I used to have 5 forward neutral and reverse now I only have 5 forward
@IngenTechNational
@IngenTechNational Год назад
@@domjoey7514 Oh ok!
@domjoey7514
@domjoey7514 Год назад
@@IngenTechNational I was just wondering maybe I did something wrong but I put it in the same way I took it out
@IngenTechNational
@IngenTechNational Год назад
@@domjoey7514 When I do something like that, I like to take photos or videos so when I put it back together I can. For example the bowl gear had a dot on one side and after looking at the footage it went in facing the left side of the transaxle(toward the short shaft).
Далее
Off-road Lawnmower Custom Trailer Hitch
13:03
FUEL SAVING! T4 5th Gear Upgrade Mod 02B Gearbox
21:03
Surxondaryoga biz chempionlarimiz bilan yetib keldik!
00:55
Get 10 Mega Boxes OR 60 Starr Drops!!
01:39
Просмотров 14 млн
아이스크림으로 진짜 친구 구별하는법
00:17
HOW TO WELD A DIFF....THE CORRECT WAY!!!
16:39
Просмотров 177 тыс.
Welding the Diff and Drifting the Rat Rod Race Mower
17:53
Peerless mst206 speed up kit prototype
9:15
Under $20 diff lock(lawn tractor)
12:33
Просмотров 107 тыс.
Broken Driveshaft & 3 Hours From Civilization!
18:18
Просмотров 1,1 млн
ИНТЕРЕСНАЯ ПОКРАСКА АВТО
0:17
Красивый груз!
0:14
Просмотров 1 млн