What Are Aux Channels and How to Set Up Flysky FS-i6X Aux Switches

Подписаться 42 тыс.

Просмотров 84 тыс.

50% 1

Wondering what "AUX" switches are? This video is for you! I'm going to explain what aux channels and aux switches are, and show you how to enable them on your Flysky FS-i6X transmitter!
In case you're looking for a great budget radio,
FS-i6X with receiver www.banggood.com/custlink/3vv...
amzn.to/2KkLlxz
Please buy through these links to help me keep this channel going!
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
MY GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
FILMING GEAR
Main camera amzn.to/2pGZA4L
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects!

Наука

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 269

@francisscanlon3510 4 года назад

I have this transmitter and your videos have been extremely helpful. Fixed wing is my thing so videos referring to that topic are most appreciated.

@RCwithAdam1 4 года назад

That's great! More fixed wing stuff coming up!

@strongbgood 2 года назад

This was super helpful, explained very clearly, and gave me exactly what I was searching for. Thanks so much!

@DaleLadDaz 11 месяцев назад

3rd video ive watched, and tbh, the only one worth watching. I am pretty new to rc and know nothing, you have just not only taught me how to assign the full 10 channels, but made it so simple and excellently narrated as you went through the process. Thank you

@pepper8048 Год назад

I agree. This is an excellent video on how to do the basic setup. I'm looking forward to visiting your site to see what else you have posted. I'd like to see a full video on setting up head tracking, if you are looking for a topic.

@queenidog1 7 месяцев назад

Good stuff buddy. Very well explained, no crappy music, good visuals. Told me everything I needed to know.

@raifshammas8099 Год назад

Thank you so much,no one explain RC stuff as clearly as you do, Great presentation & talent, very professional.

@denismoran670 Год назад

As usual, a great vid and explanation for us techno challenged people! Thanks, Adam.

@paulwiltshire2676 3 года назад

Hi Adam great video easily explained for a novice like me. I had tried to make these switches work without success but thanks to your knowlege I now have working accessories on my model boat.

@RCwithAdam1 3 года назад

Glad it helped

@Mosfet510 7 месяцев назад

I recently picked one up and wanted to use the aux switches, this saved a lot of time, thanks.

@RCwithAdam1 7 месяцев назад

glad I could help!

@knomigwen 3 года назад

I just got this Transmitter, and I am really excited to start flying!

@GrantFarrell 3 года назад

Same here. Starts tomorrow

@NeverDieKnight 23 дня назад

@GrantFarrell same here starts tomorrow

@michaelturpin4655 10 месяцев назад

this has answered a lot of things and has enabled much more functionality

@ryanbohm4376 2 года назад

Very well done video - super clear instructions. This really helped me out!

@RCJCB_and_Forestry 3 года назад

Great vid. I’d almost started messing with firmware when thankfully I found this video!

@juaneiza 3 года назад

Great video! Quick and to the point.

@secretfacekid8920 4 года назад

Just bought one of these Adam, great set up video thanks.

@RCwithAdam1 4 года назад

Glad it helped!

@royd7984 3 года назад

I ordered one. When it gets here I'll need your help to learn how to set up everything. Thanks so much. See ya...

@ar-redneck2926 3 года назад

A very simple video for a complex problem thanks a lot

@JG-hi6by Год назад

Thank you so much for this! May I make a suggestion of perhaps setting it up for tank like steering for RC ground models? If you haven’t already? (left stick controls forward backward left and right all on one mixed control. Right stick controls camera or possibly a little turret

@timewaster1959 Год назад

Most easy way to understand this upgrade,,,Thank you very much!😊

@cchheeeessee 4 года назад

Thanks so much. This was very very helpful and got me going.

@Jesse-qh5rn 4 месяца назад

flawless video!! super helpful thanks

@joegirty6609 4 года назад

just purchased one of these from the link you provided on another video. Need as many tutorials as possible. Will bind it with a mobula 7 i got on banggood. Looks like it will take several months to get here for some reason. Thanks for reading my life story. LOL.

@RCwithAdam1 4 года назад

Hi, Joe! Thanks for using my link! More tutorials are on the way!

@raulvila1617 4 года назад

This saved my life, I didn't knew you had to activate the switches

@OzFPVflyer 4 года назад

Mine came from Banggood perfectly packaged and all channels including Aux channels were fully setup. I bound the receiver to the quad and absolutely no setup was required on the transmitter including end points ect. Amazing.

@RCwithAdam1 4 года назад

Wow! Which quad?

@OzFPVflyer 4 года назад

@@RCwithAdam1 I only bought the radio, using it for a freestyle quad I already built. In Betaflight all I had to do was choose IBUS and everything else was perfect but I did have to setup modes. I didnt need to do anything on the radio.

@ChrisfromKeyfarm Год назад

Thanks for the information 👍

@SOPHOCLESIFY 2 года назад

Great video, very helpful for beginners.

@hattichya 3 года назад

Liked the video! Few questions though. Are some of these channels Digital inputs or relays? And what are variable knobs? Resistance?

@adrianvargas3408 8 месяцев назад

Thank you so much, never knew there are more settings.

@richg.2579 Год назад

Excellent explanation, thank you.

@bevanforbes8360 3 года назад

Thanks for a simple explanation for aux switching .. cheers

@SubrataMondal11 3 месяца назад

Very helpful content, thanks.

@christophmosersha 3 года назад

Super helpful, like many others of your videos! Thanks!

@dgb5820 4 года назад

Great video and I really appreciate your effort

@josh-lt8ml 3 года назад

Excellent, helpful video

@hspeed3656 3 года назад

Thanks for the video Adam, is there any way under assign switches , Idel Mode to VRA, I am only seeing the option to assign SWA to D, Thank for any suggestions.

@think2cre81 Год назад

I enjoyed this video . I subscribed .

@poupilouppolpy7514 4 года назад

This was very helpful, thank you very much!

@RCwithAdam1 4 года назад

You are ver very welcome! 😊

@IainMace 4 года назад

Yassss - oh finally. Thank you so much for this video - finally got it working - total legend. Is there any way to feed the RSSI through one of the channels so i can get RSSI through the OSD?

@gusanillo81 3 года назад

this was a great help. Thank you!!

@fpwolff 6 месяцев назад

Thank you so much, again very helpful , a born teacher.

@rclover3059 3 года назад

Thanks for the video buddy, May I know if you know how to use the 3 position switch in a3 pro gyro?

@Jonathan-qi5on 3 года назад

Thanks for the information!

@RCwithAdam1 3 года назад

You bet!

@deejay-blinkz-official5604 2 года назад

Thank you bro very helpful

@obs_erick8429 3 года назад

Thanks for the vid very helpful

@giorgiolelmi8175 2 года назад

It was really helpful. Thanks :)

@coreyfuchs730 5 месяцев назад

Great content.. Very helpful..

@wouthaeser6612 3 года назад

Compliments for your great tutorials! I learned a lot ,but................I have 1 problem setting up my FS-i6X: I built a baitboat for carp fishing (very popular in the Netherlands) and I needed 2 motors to move the 2 feeding buckets (they roll over). I combined them with the AUX Switch VRB. This works very well, but the motors are going to fast. How can I reduce the motor speed of them? I hope you can help me out.

@mrvdbos Год назад

Very helpful, thanks!

@HappyDude1 3 года назад

Thx now i know what it means I got this flysky 6 channel For my tank but the aux switches in the manual are talking about 3 stands But the transmitter has only 2 stands for the aux like yours Is that a problem ?

@think2cre81 Год назад

Hey Adam , I'm Tim . I just finished changing my FS-i6 into the FS-i6x from watching your other video. It took awhile but was able to get it done . Now I'm trying to assign my switches back the way they were before. I had switch (A) or your (5 aux ) as you have yours set up in this video . as normal and sport mode for Ail. Elev. Rude. With dual rates . Then switch (B) your (6 aux ) as a safety for my throttle. Motor would not turn on if the switch was down . Then I was using (D) your (8 aux ) for trainer/student mode . But now I can't get the motor safety switch (B) to work at the same time as as the sport mode switch (A). And I was watching this video for help but because it's not a FSi6x it's a FS-i6 with the mod to 10 channels. It doesn't have the same listing for aux switches. It doesn't have that option after factory reset in your video. So can you help me figure this out ? Let me know please 🙏 lol 😆

@gumelov 3 года назад

This was very very helpful.

@tigerclawzgaming Год назад

I don’t see the aux switches settings all I see is factory reset

@Tanky2021 8 месяцев назад

Me too :(

@SkullClanReal 6 месяцев назад

Same

@jjab99 4 года назад

Very useful, many thanks. Have Fun, Joe

@RCwithAdam1 4 года назад

You're very welcome!!👍

@bevanforbes8360 3 года назад

Thanks for a simple explanation well done chee

@apapazah76 4 года назад

Very helpful video, thank you very much!

@tomjoad1060 8 месяцев назад

thank you, this was very helpful.))

@kj-yi5yo 2 года назад

Thank you sir .I need help regarding my rc 6 channel heli how to bind it with my 6x

@tonyholmes7992 3 года назад

First rate and great explanations. Thanks.

@RCwithAdam1 3 года назад

Glad it helped! 👍

@lhb4031 4 года назад

thanks, very helpful. great video.

@thorntontarr2894 3 года назад

Brilliant, mate. Understood.

@abemarais1292 2 года назад

Hi Adam ,I know it's an old post or trends,but how do u do a mix on aux 4 for mixing rudder and alleron.What I need is to switch mix on and off

@av_kuroneko7008 3 года назад

Best video on how to do this!!

@RCwithAdam1 3 года назад

Glad I could help!

@Divyesh_Sinha Год назад

Hey is there a way to set diff performance modes using the aux switches for a dual motor rc tank like mode 1 will enable 50% motor power in all directions and mode 2 will enable 100% motor power in all directions mainly to have more precision on the stick while doing tighter movements

@barryfitz4692 2 года назад

Hi Adam, I have a Flysky i6s I’m having trouble with the

@davidanderson5728 Год назад

Very helpful. Is it possible to add a satellite reciever the unit?

@RCwithAdam1 Год назад

I believe so, but I've never used one.

@geofkane2365 6 месяцев назад

Very helpful. I had to play catch up a few times!

@peterb01 3 года назад

Hi, Adam. I'd like to program in a little rudder, and maybe later a little down elevator, onto SwD for hand launching a DLG. I've tried several things to no avail. What's the trick to make this happen? Can you help?

@JB73691 2 года назад

Can you assign the throttle channel 3 to an AuX channel ? Please let me know and thanks jb

@jerrysquared4952 2 года назад

Very helpful, thank you.

@RCwithAdam1 2 года назад

Glad it was helpful!

@lesproductionsperspective3503 3 года назад

Really helpfull! Thanks Adam!

@RCwithAdam1 3 года назад

My pleasure!

@buder5116 2 года назад

the more time progress the more questions i have what the maximum voltage can the reciever handle ? and how to handle a 270 deg servo it seem they require a wider range signal but nobody know how

@ashleyhopkin1065 2 года назад

Hi, I have this handset, how would I program channel 7 to swb on the remote to switch channel 3 control between servo 1 and servo 2? Channel 3 which is the left joystick up and right to control servo one with swb in the up position and the second servo with swb in the down position? Would the two servos be connected to channel 3 with a relay on swb switching between the two different servos? Cheers

@bradlymyrick5050 4 года назад

Great Video! Thank you! I'm programming channels 5 and 6 for a robot

@RCwithAdam1 4 года назад

Robots are cool! What does your robot do?

@magicmike1122 Год назад

Does this also have failsafe so if I lose signal, the servos go to a pre set position?

@SP-yw2tl 2 года назад

Hi Is it possible to set my gyro gain to switchA and vrA at the same time? So if I use switch it goes from 0-100 but then the vr changes the gain to allow sensitivity adjustment?

@kevinbryden1327 2 года назад

New to FPV I have a fs-16x I am using Liftoff to learn, I would like to setup the transmitter for my X220 drone what setting should I change.

@kj-yi5yo 2 года назад

Thank you . My question how can I bind wltoys v966power star 1with flysky fs i6x ?

@BrokeBeardedGuy 3 года назад

Is it possible to sway the dials for a switch or a regular switch to a 3 position? I'll probably end up feeding an Arduino with the receiver

@royd7984 3 года назад

Adam you’re awesome. Thanks for your helpful videos. Those printed instructions are worthless. Biggest problem for me is changing screens without screwing up stuff. I’m talking about changing pages or menus, whatever. Maybe you could explain that for us. Thanks so much.

@jmogyoro 4 года назад

Hello. I have two separate but related questions I am hoping someone can help me with. 1: If I set up a mix, is there a way to turn this mix on/off via a switch? 2: Dual rates(sport/normal) are activated by a switch but is there a way to have 2 separate switches for dual rates, say one switch turns on sport rate for ailerons and another switch does it for elevator. I had both of these functions on another radio and useful to me. thank you.

@chrisshingler5253 3 года назад

Great job I got it!

@RCwithAdam1 3 года назад

Good!

@dgb5820 4 года назад

Mate that was an awesome video

@RCwithAdam1 4 года назад

Thanks so much!!

@traviscozza7177 3 года назад

So what would the aux dial switches be used for?

@michaelturpin4655 8 месяцев назад

Using a 6 channel receiver is it possible to assign channel 5 and 6 to the variable knobs

@thisisfromage 3 года назад

This helped a lot!!!

@RCwithAdam1 3 года назад

Glad I could help! 😀

@ojeezrc 3 года назад

How to make the alieron and elevator mix ? For example when I turn left and right with the alieron I want the elavtor to move up aswell . instead when I turn to one side the elevator goes down and when I turn to the other side it goes up . how to make the elevator stay up when I turn both sides?

@iridiumnight3750 2 года назад

Good tutorial thanks.

@RCwithAdam1 2 года назад

You got it! 🙌

@ramalho 3 года назад

Hi Adam, I'm confused about something. When you enable the extra channels, how do you then use a switch for your dual rates? I like to have my rates on separate switches - elevator, aileron & rudder.

@RCwithAdam1 3 года назад

Hi, Rick! As far as I know, there is not a way to change the rates of channels individually--just all at once.

@briangrubb5481 Год назад

I have no tips to offer because i need them myself plus some help lol.. im trying to change the transmitter on a 22 channel excavator and someone mentioned flysky so here i am. I wasn't sure about the channel thing and still not kind of but most of the movement is the joysticks for boom travel and bucket curl snd after tht its forward and back and rotation an thats it besides on/off, sound blah blah. My question is will that transmitter and the 10 channel receiver do everything i need or do i need extra one bc im just confused honestly

@thesouthwestern 3 года назад

Is it possible to assighn a mix mode to a switch.. so that a toggle switch switches on - off mix "a" (like a mix that slaves channel 3 to channel 1).

@mikemioduszewski9163 3 года назад

Great information on setting the switches. Not in the manual. Kudos

@RCwithAdam1 3 года назад

Glad it was helpful!

@kunad2294 4 года назад

hello, how do you bind the flysky fsi6 to wltoys v911s heli.

@shadow4 4 года назад

Thank you very much, helped me loads

@RCwithAdam1 4 года назад

Great to hear!👍

@HaveFaithInGod 2 года назад

What I'm looking for is the map into for switches. ie Aux 1 = Arm Aux 2 = Mode Aux 3 = ? ect. What are the functions of the various channels?? I'm looking how to toggle off and on the led lights on a new drone I have with Flysky recevr but I don't know which Aux equals that function. I'm using a multiprotocol Jumper T Lite tx. Help?

@suecamilleri7363 4 года назад

Hi, I like your videos you explain very well. How do you setup the battery external(in the i6x)? Because mine around 1min starts beeping I thought maybe there's something to be set from the i6. Thanks

@RCwithAdam1 4 года назад

Hi! Thanks! Does it only beep if you leave it alone? Because that's there to remind you you've left it on. Otherwise, if I recall correctly, the INternal battery setting will adjust the displayed transmitter voltage, and external is for the receiver voltage (I'll double check later).

@suecamilleri7363 4 года назад

@@RCwithAdam1 yeah I did change the settings in the rx external now its good

@nder4786 4 года назад

Good video, very helpfull

@farmerdrone 10 месяцев назад

great video. thanks. very helpful. I would like to take it up a notch and program switch 7 to the FMS Reflex V2 ... 3 options ... beginner..normal .. advanced ... who can I do this? thanks

@WakanTankaDakota 7 месяцев назад

Hi there, I am a beginner and do have a flysky i6 without x. I don’t find this menu. Is this not possible by my fs i6? I checked your other videos but I didn’t found a solution. Thx for your great work! Armin from Bavaria/Germany