What are GMRS Privacy Codes and Should You Use Them?

Подписаться 20 тыс.

Просмотров 12 тыс.

50% 1

GMRS and FRS radios have the ability to use "privacy" codes to squelch out other communications. In this video we explain what privacy codes are and, what they are not. We also show how to configure them on the UV-5R, Radioditty GM30, and Midland MXT500 radios.
-------------------------------
Join this channel to get access to perks:
/ @trailtraveler
Check out the Trails Off-Road All Access Pass
trailsoffroad.com/all-access?...
-------------------------------
JEEP GEAR
Bestop Trek Top: bit.ly/bestoptrektop
Bestop Bumpers: bit.ly/bestopbumpers
Yukon Gears and Axles: www.yukongear.com/
RCV Axles: www.rcvperformance.com/
Baja Designs Lights: www.bajadesigns.com/
Yankum Ropes & Recovery Gear (10% discount): bit.ly/yankumgear
EZ Flate Inflation System: ezflate.com/
APEX Designs: www.apexdesignsusa.com/
-------------------------------
OVERLANDING GEAR
Tribe Trailer: tribetrailer.com/
Devos Camp Light: bit.ly/devoslr/
Alpine 61 Tent: bit.ly/494cqOg
270 XL Awning: bit.ly/270xl
-------------------------------
JEEP BUILD
The Edge 4x4 Automotive: theedgeautomotive.com/
-------------------------------
Follow our build at revkit.com/trail-traveler
Check out our Amazon store at:
www.amazon.com/shop/trailtraveler
#colorado #overlanding #4x4 #4x4offroad #jeep #jeepwrangler

Наука

Опубликовано:

13 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@mondavou9408 2 месяца назад

Thank you, Thank you! I had no idea how they worked and found them troublesome. Now I find the radio's marketing department troublesome.

@CalmTurtle2023 10 месяцев назад

Finally a great explanation of privacy codes.

@donalderickson-si8ww 4 месяца назад

thay can only be used on family service radio side I bought three radios two are hand held's and a base radio hand held's work at five watts each an the bace radio transmitts at 45 watts there for off road.

@alfonsoavarez7074 Год назад

Thank You , well explained and understandable I’ve been wracking my brain in getting my GM 30 to transmit to baofeng. It can hear but it can’t talk back. This should solve my problem .

@De_forresto 4 месяца назад

Great info. Have you used the Btech GMRS pro before? I just picked one up

@G_L_S 10 месяцев назад

Well explained. Thank you. I’m very new to gmrs and I noticed after the end of some transmissions , it sounds like the same noise as fire and police use around my area. Are these specific radios programmed to make that noise ? What is it ? It sounds different than a roger beep

@alfonsoavarez7074 Год назад

😂😂😂😂 he’s telling you -- the cops are listening 👍🏾

@mammothtarm 2 месяца назад

Hi, Thank you for your help with setting up Privacy codes for my BaoFeng for Tx and Rx... I did set these up in Frequency Mode. I just want to be sure in order for the privacy codes to work, I have to Send and Receive in Frequency mode? Once I go back to Channel mode, I hear a lot of chatter on the radio. Thanks in advance.

@The_Samsquantch Год назад

Thanks for this video. On the screen grab you do show, is it just as simple as that DTCS Setting and then picking a DTCS code and setting nothing else? I notice you have some other channels above set up with cross, assuming those are for repeaters. Planning to just copy a whole other set of the 8 GMRS channels and have them all on a privacy tone so if we do in the off chance have someone on say gmrs 1 using privacy tone 145, we can just move up to gmrs 2 with privacy tone 145.

@TrailTraveler Год назад

Yup, it's really that simple. You are also correct that the other ones I have are for repeaters. We only keep one channel on privacy codes and just use non-tone channels when we have other people join us unless I want to take the time to program their radios.

@The_Samsquantch Год назад

@@TrailTraveler Awesome! Yeah i hear you on the group thing. i was fortunate to score a 5 bundle of the Baofengs for cheap and just have them all programmed. I usually end up tossing a couple out to the peasants of the group still in the stone age with their CB radios. :D

@jamesgoodrich8355 Год назад

Question, and I think I know the answer. Both the tx and rx have to be programed with the same code on all radios in the group, correct? Great Vid, Thanks.

@TrailTraveler Год назад

That is correct

@chefbrittan84 5 месяцев назад

If I have two radios with a PL (ctcss) setup, and we’re talking, will other people keying up on the same frequency “block” transmissions if we all key up at the same time?

@TrailTraveler 5 месяцев назад

If the have sufficient power and are close enough, yes. The PL codes only act as a filter to keep you from hearing them, many radios will even show a receive status when someone without the code is broadcasting, you just won’t hear it.

@johnmills837 Год назад

Can you set these CTCSS tones manually on your GMRS radios? Most HAM's can find the tone by scanning. The tone opens up the receiver.

@TrailTraveler Год назад

Yes, they can all be set manually on the radio. It's not hard to scan for the tones, but we aren't trying to keep our conversations private, we just want to block out other people.

@scottstevenson2754 3 месяца назад

Question: If the radios are filtering non-tone transmissions, then I'm not aware if I key the mic and step on someone currently transmitting. My question is, since I'm starting my transmission with a tone will the radio then allow both transmissions to be heard, or will it only let the toned transmissions be heard?

@TrailTraveler 3 месяца назад

You nailed it. If you have more power, you could absolutely step on someone else’s transmission.

@scottstevenson2754 3 месяца назад

@@TrailTraveler but otherwise it will be a garbled transmission due to both using same freq? Just trying to figure out why you would use the tones other than to eliminate the chatter...better to roll off the freq to another? vs potentially having garbled comm due to a chatty kathy letting someone know about her latest cat acquisition while you are trying to make a call. Appreciate the fast response btw!

@TrailTraveler 3 месяца назад

@@scottstevenson2754 Someone not listening to the tones will only hear the most powerful signal. The primary purpose is to eliminate chatter. We have actually been in places where we could not find an empty channel. Since we are using this trails, our local radios will always be a stronger signal than someone a couple of miles away. From "our" perspective, this works perfectly and we don't hear other signals.

@scottstevenson2754 3 месяца назад

@@TrailTravelerI appreciate the help! Was trying to figure out if there was a downside to this.....

@TrailTraveler 3 месяца назад

@@scottstevenson2754 The biggest downside is that if someone needs help and they hear us, we will never hear them asking for help

@donalderickson-si8ww 4 месяца назад

I owen a gmrs radoio and I donot have any privecy codes on are the privecy cods are used on f r s only then you csn pare up to and no one can talk to you thay can only lisen you got it mixed up I am license holder on G M R S

@TrailTraveler 4 месяца назад

I have never seen a GMRS radio without privacy codes. Your particular radio may refer to it as something else. Some radios refer to them as DCS codes, PL tones, or Quiet Talk. When using these codes, other people can hear you, but other people not using the codes will be filtered out and you will not hear them.

@HarryHamsterChannel 10 месяцев назад

I understand digital codes on GMRS will get you a thorough drubbing. You can transmit and receive on different frequencies. Make your own channel lineup. Customize your own repeater. Cotre digital radios are pretty private right out of the box, and even cheaper than those radios you have. Prices vary. Beat tone voice inversion scrambling is only available on relatively few radios these days, and is infuriating to eavesdroppers. But if they're already on to whatever it is you're involved with, they'll probably get you eventually. Might just wanna move.

@TrailTraveler 10 месяцев назад

I have no need for actual privacy in our conversations. We use the privacy codes only to filter out OTHER people. This keeps our radios quiet except for the people in our group. I don't care if other people can hear us, we are just out doing trails.

@HarryHamsterChannel 10 месяцев назад

@@TrailTraveler Are you sure?

@TrailTraveler 10 месяцев назад

@@HarryHamsterChannel yup, tested it