What happens if we pour Jesmonite and Epoxy together at the same time ? Wet on Wet

Подписаться 121 тыс.

Просмотров 11 тыс.

50% 1

#JesmoniteandEpoxyResin
Heyyyy my lovies . In this video, I am creating some Jesmonite and Epoxy items but I am pouring them both at the exact same time. Wet on Wet
I have never been so nervous for a creation in my life. I wasn't sure if they would cure .. or if I would destroy my moulds .. would they over heat ? Can we pour Epoxy Resin and Jesmonite together at the same time? I hope you enjoy the process and we will see what happens when we pour Epoxy and Jesmonite together.
Moulds used in video are linked in my Amazon Store Front.
5% off your order at ‘Molds and Shapes’ using my code CCC5 at the checkout:
moldsandshapes.com/
Moulds are made to order and they ship worldwide.
Products used on my channel can be found on my Amazon Storefront:
I am an Amazon Affiliate. I earn commission from purchases which help me and support my channel.
UK Amazon Storefront
www.amazon.co.uk/shop/claires...
USA Amazon storefront
www.amazon.com/shop/clairescr...
Patreon
/ clairescraftycorner
Patreon is a subscription service. I currently have one Tier. ‘In the Crafty Corner’ you will have EXCLUSIVE access to behind the scenes, photos, polls and engagement with other Patrons. I will also be sharing future project ideas and would love your input in these projects.
My published order books on Amazon:
Resin Order Book:
UK: Resin Order Book: Amazon.co.uk: Burgess, Claire: Books
USA: Resin Order Book: Burgess, Claire: 9798524919496: Amazon.com: Books
DE: Resin Order Book : Burgess, Claire: Amazon.de: Bücher
FR: Resin Order Book: Amazon.fr: Burgess, Claire: Livres anglais et étrangers
ES: Resin Order Book: Amazon.es: Burgess, Claire: Libros en idiomas extranjeros
IT: Amazon.it: Resin Order Book - Burgess, Claire - Libri in altre lingue
JP: Amazon.co.jp: Resin Order Book : Burgess, Claire: Japanese Books
CA: Resin Order Book: Burgess, Claire: 9798524919496: Books - Amazon.ca
AU: Resin Order Book - Burgess, Claire | 9798524919496 | Amazon.com.au | Books
Woodturners Order Log:
UK: Woodturners Order Log Book: Amazon.co.uk: Burgess, Claire: Books
USA: Woodturners Order Log Book: Burgess, Claire: 9798525060258: Amazon.com: Books
DE: Woodturners Order Log Book : Burgess, Claire: Amazon.de: Bücher
CA: Woodturners Order Log Book: Burgess, Claire: 9798525060258: Books - Amazon.ca
AU: Woodturners Order Log Book - Burgess, Claire | 9798525060258 | Amazon.com.au | Books
Non Specific: Order Book:
UK: Order Book: Claire's Crafty Corner: Amazon.co.uk: Burgess, Claire: Books
USA: Order Book: Claire's Crafty Corner: Burgess, Claire: 9798524865816: Amazon.com: Books
DE: Order Book: Claire's Crafty Corner : Burgess, Claire: Amazon.de: Bücher
FR: Order Book: Claire's Crafty Corner: Amazon.fr: Burgess, Claire: Livres anglais et étrangers
ES: Order Book: Claire's Crafty Corner: Amazon.es: Burgess, Claire: Libros en idiomas extranjeros
IT: Amazon.it: Resin Order Book - Burgess, Claire - Libri in altre lingue
JP: Amazon.co.jp: Order Book: Claire's Crafty Corner : Burgess, Claire: Japanese Books
CA: Order Book: Claire's Crafty Corner: Burgess, Claire: 9798524865816: Books - Amazon.ca
AU: Order Book: Claire's Crafty Corner - Burgess, Claire | 9798524865816 | Amazon.com.au | Books
Social Media accounts: linktr.ee/ClairesCraftyCorner...
Epidemic Sounds Referral Link: www.epidemicsound.com/referra...
10% off at Let’s Resin
Use code: CCC10 for Resin, Inks, Glitters Micas and Powders
Use code: ClaireCCmold for Let’s Resin Silicone Moulds and other supplies.
Affiliate link to Let’s Resin Amazon store:
www.amazon.com/letsresin?maas...
Chameleon Flakes:
www.amazon.com/dp/B0957JLWTK?...
Chameleon mica powder:
www.amazon.com/dp/B092D6Y2S4?...
% off across the site at Hemway
www.hemway.com/ using my code: ClaireBurgess at checkout. (One word no spaces)
All products listed will not cost you anymore than buying the same product outside of the link. However, if you use my link I get support from Amazon for my channel.
Please do your research for these products I cannot be responsible for the product if not to your liking. Responsibility lies with Amazon.
Everything I do in my video is my way of working.
You may choose to work differently and what I show you here is just an example.
I am a full PPE Resin Artist. Please take responsibility for your own safety and wear the appropriate Respirator, gloves and eye protection. Work in a well ventilated area.

Хобби

Опубликовано:

18 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 129

@mariapennylane Месяц назад

I’m obsessed with all of your crafting experiments. So glad you show us absolutely EVERYTHING, blunders and all. Thanks for being so damn real!!❤😊🫶🏽💃🏼

@Spiceyspiney 2 года назад

The tray turned out so awesome! I honestly think that it looks like an underwater scene - it's gorgeous. And a few little fish and nobody would think badly of the bubbles... ;-)

@amethyst1826 2 года назад

What is FRAS, please Mary?

@Spiceyspiney 2 года назад

@@amethyst1826 Fellow of the Royal Astronomical Society. Astronomy is my main channel but I never remember to switch to my art and craft channel when I watch Claire's videos!

@ClairesCraftyCorner 2 года назад

thank you so much lovely ... ohhh they would look so cute !

@LiveItLikeLisa 2 года назад

The tattoos are bloody awesome......made a huge difference. I love these experiments and they would be so helpful to resin crafters. Love watching you create these and trying out new techniques.

@ClairesCraftyCorner 2 года назад

thanks so much babes xxx

@LiveSleepResin 2 года назад

Oh my goodness, I'm definitely trying this. I just love the texture and the tiny bubbles. Thanks for sharing.

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@elder7293 2 года назад

Green is my fav colour! Love the effect but the tattoo o my days just amazing 👌

@ClairesCraftyCorner 2 года назад

Thank you so much lovely xxx

@kerravonsen2810 Год назад

Adding the tattoo made the tray utterly gorgeous.

@BoredWifesProductions 5 месяцев назад

Very pretty. Love the tattoo! It made the piece.

@yvonneirving6488 2 года назад

I think the round one you didn't like has potential Claire, especially if you leave the resin a bit longer next time. Great experiment though.

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@SkitchBean_aka_Christine_E Год назад

Thanks for sharing your knowledge and experiences with us! Great video!

@kellyjean4981 2 года назад

Great experiment. The tray looks beautiful with that tattoo.

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@mizzuzie3338 2 года назад

The colour combination is stunning and I could probably spend a few hours just looking at the interface between the resin and the jesmonite.

@ClairesCraftyCorner 2 года назад

thank you so much Mizz yeh absolute same xxx

@jacquelinevandermeer 2 года назад

I adore it!!!! Stunning that it worked out so well😍

@ClairesCraftyCorner 2 года назад

Thanks so much Jacqueline 😊

@kris_kreations 2 года назад

So so so pretty. Who would have known. Awesome, Claire. 🔥🔥🔥

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@fotojeny Год назад

You are an absolute treasure! 💕

@lilykelly5450 2 года назад

Love love. You are brilliant. You remind me so much of me. My head is saying waiiiiit. My body just goes ahead and demoulds. 🤣🤗🙌

@ClairesCraftyCorner 2 года назад

haaaaa thank yooo xx yeh that is me for sure haaaa

@lisathomas8916 2 года назад

Hi Claire! I love the results of your experiment. That tattoo -WOW! What a difference it made. ❤️❤️❤️💕

@ClairesCraftyCorner 2 года назад

thank you so much Lisa yeh it definitely needed something x

@melissaphillis7247 2 года назад

Awwww, Green is life! Lol I love it all, even the coaster. And I love the holes, and the marbling. Great video

@ClairesCraftyCorner 2 года назад

Thank you so much lovely xxx so glad you love the Green xx

@rebeccahyatt7789 2 года назад

Hey, You don't know what's gonna work until you try. Some of the best recipes created were experiments!!!Love the bubbles, pieces look like emeralds, I love these. Thank you, Claire You cover things wIth tattoos I hide things I don't like with glitter. LOL The bubbles make them look like an undersea world!

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx so glad you love them and yes Glitter is also gorgeous

@jacquelinehelliwell5954 2 года назад

Hiya Claire I really like these pieces even though they were experinents, they turned out really pretty, love the colours. The round pot likes looked like glass and the tray was beautiful with the tattoo, you always seem to suprise yourself how good your experinents turn out, lovely tfs Jax 🥰 x

@ClairesCraftyCorner 2 года назад

thank you so much Jax xx so glad you like them ... yeh I think I always fully expect everything to not turn out haaaaa

@TheBeardx16 2 года назад

I think they look really cool a sort of jade rock mixture

@ClairesCraftyCorner 2 года назад

ohhhh Rich yes ... they actually do ! xxx thank you so much

@sharonhawke4774 2 года назад

hi hun I think that they came out looking great very rustic and very country or cottage farm items once again you have done a wonderful job well done 👏👏👏👏👏👏👏 xxx

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@chrislogan6067 2 года назад

Really pretty!! And you didn't get boiling resin like I have!! Can't wait to try this!!

@ClairesCraftyCorner 2 года назад

Thank you so much Chris xx So glad you like it .. yeh I have had my fair share of Exothermic reactions lol

@kerrysmith973 2 года назад

The tray is gorgeous! I wonder if the jesmonite would sink if the resin had time to thicken up? I know it’s a fast cure already so don’t know if it would flash cure if let in a cup for a little while…. Lots of questions!! X

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx yes a few have asked if I couldlet the resin thicken ... but I think it would definitely be better results. I am going to try it .. and maybe use normal resin as you're right ... this super fast cure resin is more likely to flash cure

@gourdhead22 2 года назад

That is very cool experiment... it was scary. FUN! hugs Sheryl 💙🎨💙

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@sandyramsthaler4924 2 года назад

Pretty cool, love the color choice, hopefully the top coat will fix the holes

@ClairesCraftyCorner 2 года назад

thank you so much xxx

@trevorburgess2695 2 года назад

It really is good to try new ideas. You are doing a fine job. Keep up the good work. 👏👏👏

@ClairesCraftyCorner 2 года назад

thankyooooooooooooo Dad x

@trevorburgess2695 2 года назад

No problem,love marbling.......

@ClairesCraftyCorner 2 года назад

@@trevorburgess2695 thanks you will like Wednesday's video then 😁😁😁

@dawncoleman470 2 года назад

Reminds me of turbulent water. Bubbles look great even though some people don't like them. Fantastic experiment ❤

@ClairesCraftyCorner 2 года назад

Thank you so much lovely xxx

@tinacluff2793 2 года назад

So glad you did this experiment, was wondering how the 2 would react if done something like this.

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx glad you found it helpful

@nanasdesigndepot Год назад

I love it! I haven't been able to find Jasminite in the U.S. until yesterday and I finally found some at Five Below and plan to try it with Redin! Thank You

@nanasdesigndepot Год назад

With Resin!

@iulianapaun606 2 года назад

wow!

@ClairesCraftyCorner 2 года назад

thank yooo :)

@dawnr714 Год назад

I think the bubbles in the tray top coat were because of all those divots and air pockets that were by the leaves... 👍

@christinahutchison3967 2 года назад

Great video

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxxx

@danaparsonsliquidcosmosart2669 2 года назад

You reminded me.. I have things for you.. pokes on Instagram lol. That jesmonite green is amazing... O.o wow. I didn't think this would work anything more than 3 percent acrylic paint in resin can cause a fire.. so my heart was pounding for you! But given unlike acrylic paint jesmonite doesn't have so much water in it .. and it cures so fast.. I think that's why it worked!! The weird formations is the resin fracturing with the water content. I think it happened on the tray cus it was thinner where the pot has a deeper resin section once it had risen

@ClairesCraftyCorner 2 года назад

Thank you so much lovely xxx that makes total sense xxx

@lesleywilliams5877 2 года назад

Beautiful! What an unexpected result! I must admit I thought it might just be a sticky mess 😱

@ClairesCraftyCorner 2 года назад

Thank you Lesley so did I haaaa fully expected it to just all fall out of the mould lol ! 😊

@chippydoodle1415 2 года назад

Great experiment Claire with beautiful results. I just wanted to ask you, do you know if I use temp tattoo’s on jesmonite, can I just use jesmonite sealer on them to stop the stickiness of tattoos?

@ClairesCraftyCorner 2 года назад

heyyy lovely ... I havent tried the sealer on temp tattoos it is on my list to try but I know it works with Vinyl x

@badmojjo 5 месяцев назад

But this is good news! It means you can seal Jesmonite with epoxy!

@charlenelesher1198 2 года назад

You know what? Here's what I thought when I first saw the trinket holder...think of a tropical rain forest with the lush green on the trees, misty rain making bubbles on the leaves and all over, the sound of the birds joyously chirping in the light rain, beautiful green frogs all shiny and wet. That is what I saw at the reveal! I absolutely LOVE that piece! ♥️ ♥️ ♥️ I am so bummed that we can't get jesmonite here in the USA. Well, we can get it but it is two to three times more expensive than resin because it has to come from Canada or the UK. Perhaps by the time I get better working with resin, it will become available here. I wouldn't sand that piece at all. I would just put a top coat of resin, and maybe a sealant on the rest. Marvelous!

@ClairesCraftyCorner 2 года назад

thank you so much Charlene xx wow that is such a beautiful description I can totally see it xxx really means a lot

@amethyst1826 2 года назад

Sooooooo pretty! xx

@ClairesCraftyCorner 2 года назад

Thank you! 😊

@kimsmith1292 2 года назад

I’ve too coated Jesmonite with resin and what I’ve learnt is that you need to nurse it along. It seems that as Jesmonite is a porous material, it creates bubbles. If you keep checking, every 30 minutes or so, you can zap them.

@ClairesCraftyCorner 2 года назад

Thank you so much Kim xx I have probably top coated about 4 Jesmonite ... plain Jesmonite trays and honestly never had an issue with air ... might be because they were cured weeks before I top coated I dont know .. but these definitely needed the nursing

@KittyKimono Год назад

Yes!! I learnt this lesson the hard way haha

@gailwatkins2361 Год назад

❤

@juliegayson7947 Год назад

Hi brilliant but if you find a way to fix it please tell us. Thanks for being so inspiring . X

@TrackerLorna 2 года назад

Wow beautiful🥰🥰

@ClairesCraftyCorner 2 года назад

thank you so much xxx

@Laura_1216 Год назад

I'm hoping you can help me? I've tried looking for Jesomnite on Amazon Canada and I can't find it ar all. Is there a special place to find it?

@lindaeastment4542 2 года назад

Hi Claire, I loved your Two pieces of art work if it was me I Wouldn’t sand the tray because it is what you made & very Unique & special to you ❤️👍Lin

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@lindaeastment4542 2 года назад

❤️👍

@serahall4838 2 года назад

I’d love to see a similar mix when the resin has gone a lot thicker. Can you try please 🙏 xxx

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx I absolutely do need to try this

@spindlesworkshop9744 2 года назад

😉👍

@ClairesCraftyCorner 2 года назад

Thank you so much lovely xxx

@athifahasan5268 2 месяца назад

Hi Why does my cement crack even b4 unmolding at around 6 hours itself ? (There was a crack on the middle like a line

@ClairesCraftyCorner 2 месяца назад

Heyyyyyyy my lovely ... ohhhh sadly I do not know much about Cement 😢😢 I've only used its a couple times about 5 years ago. I will have a play with more I think 😍😍😍

@steveellis8746 2 года назад

Unusual finish.. maybe waiting till the resin is towards the end of its working time, so thicker, before pouring 😊 For the bubble problem might a sealant coat solve that ?😊

@ClairesCraftyCorner 2 года назад

Heyyyy Steve yes ... totally would be better and I think it would help the Jesmonite not sink also x

@KittyKimono Год назад

I tried this a while ago but like a big fool I let the resin cure before adding the jesmonite which of course did not pick up the resin at all... I was left with a big jigsaw basically haha

@georgiatzina3295 2 года назад

Can i ask you something? If I take it out of the mold and it has a wall around how can I make it straight. Epoxy resin and jesmonite?

@ClairesCraftyCorner 2 года назад

hey lovely .. you can the lips back xx

@ClairesCraftyCorner 2 года назад

heyyyy sorry lovely ... that meant to say ... you can sand the walls x

@dawnr714 Год назад

I would've been scared just cuz fires and fumes could result in mixing wrong things with resin -- such as a plant worker had mixed two different brands of resin and caused exploson. But I'm a scaredy cat so that's imo. 😃

@unaschattenherz7051 2 года назад

Did those bubbles destroy the surface of the tattoo? It was crisp before, and I realized some of the numbers were nearly gone. So did the air bubbles went through the tattoo?

@alcg3981 2 года назад

Hmm, yeah, the 3 & 4 ... and maybe some 'cracks' in tattoo? This is 2 days after I believe ....

@ClairesCraftyCorner 2 года назад

heyyyyyy Una ... ya know ... I didnt even notice I will have to look at it properly but quite possibly x So frustrating I have never had issues with tattoos and top coating ... I have done it loads x

@ClairesCraftyCorner 2 года назад

ahhhh thank you .. I honestly didnt notcie :( it is frustrating

@kareykins 2 года назад

Absolutely love the tattoo, will you let us have a link to them?

@ClairesCraftyCorner 2 года назад

thank yoooo Karey ... the tattoos are linked below xx

@ClairesCraftyCorner 2 года назад

sorry lovely ... just realised they were not there ... they are there now it is a 52 tattoo pack called Shegazzi

@janesavage4733 2 года назад

Maybe with some gold leaf instead of the leaves. Well done.

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx

@anitajscott 2 года назад

Wow I love this, I liked it before you added the tattoo, however I understand if you don’t like an area , to cover it

@ClairesCraftyCorner 2 года назад

thank you so much lovely xxx ahhh that is amazing so glad you liked it before x

@alicestoklosa8740 6 месяцев назад

Where do you buy jesmonite?

@ClairesCraftyCorner 6 месяцев назад

What country are you in ? If you go on to the Jesmonite official website .. they have a list of stockists around the world 🌎

@jeannehinrichs5734 2 года назад

all 3 have positives but there is room for improvemen😊

@ClairesCraftyCorner 2 года назад

thank you so much xxx

@juliepierce2066 2 года назад

Loving the end product but I can't find that gorgeous tattoo anywhere?? Please, do tell !!

@ClairesCraftyCorner 2 года назад

Heyyy Julie .. thankyooo xx all tattoos are listed on my Amazon Storefront ❤️

@juliepierce2066 2 года назад

@@ClairesCraftyCorner I've already searched both the UK and US storefronts... its not there

@ClairesCraftyCorner 2 года назад

@@juliepierce2066 ohhhh no 🙈🙈 its not in the tattoo store ? OK I'll go look so sorry

@ClairesCraftyCorner 2 года назад

@@juliepierce2066 heyyyyy Julie .. I have just linked them in the temporary tattoo section on the storefront .. they cone as a 6 pack 😍😍😍

@juliepierce2066 2 года назад

@@ClairesCraftyCorner I'm sooo sorry to bother you again, but I've searched your temporary tattoos file now 3x and it not there ... at least on my end? I'm in Canada. Maybe your mistaken in the tattoo itself? It is the one with the vintage pocket watch with roses around it that you added to your jesmonite dish that you use often. It turned out beautiful in the end. Have I lost my mind maybe ?? 🤪

@nancylevinson3353 3 месяца назад

I know you can use alcohol in your mold before pouring

@yvonneellenberger9350 2 года назад

comment???ok,.... CLAIRE YOU ARE SO SO SOOOOOO CRAZY :D :D :D

@ClairesCraftyCorner 2 года назад

lol thanks Yvonne :) love that for me

@beverleyjones4179 Год назад

Why di you stop doing Jesmon why

@ClairesCraftyCorner Год назад

I will be back with it very soon ... Next week in fact .. I usually explore a particular medium for a but and then go back to it when new ideas come ❤️❤️❤️

@beverleyjones4179 Год назад

@@ClairesCraftyCorner i got my jesmonite yesterday going to try it today