What Happens if you use 2 Stroke Premix OIL in your Diesel? 

Watching you try to figure out the premix ratio is a reminder of why the metric system is so superior.

I use Conklin diesel plus in both my big rigs and my drag truck. I also treat the drag truck with about 4oz of 2 stroke oil. It's a 12 gallon fuel cell. The p7100s need a ton of added lubrication at 5-6000 rpm. Modern diesel fuel does not have enough lubrication to maintain good barrel/plunger wear at that rpm. 2 stroke oil won't clog your injector tips.

fill it in before you refuel so it will mix better...adding it afterwards, half of the oil sticks in you filler tube

Put the additive in your tank First, then the fuel. This helps for better mixing of additive and fuel.

2 stroke then add diesel.

I would recommend hotshot products to anyone with a diesel. I use the fuel treatment every full up and the friction additive every oil change in my 2000 7.3. Love all their products!

It's not a myth, and you will not clog anything. But you need to put the oil in before filling diesel.

Well 2 cycle oil as an additive was recommended to me by Big Bang Injectors. I have a 2007 dodge 3500 w/ 5.9 Cummins, all stock. It runs rough when cold and smokes white intermittently. They figure my injectors are worn, so saving my money for a new set and running the oil in the mean time. About 350ml per tank.

The size of oil molecules is microscopic compared to the 5 micron of particulates that make it through the fuel filter. It won’t plug your injectors😆

You're supposed to pour he additive in first so it mixes properly.

I use a quart of tcw-3 in every tank in and old 12 valve. It helps lube the pump on older diesels that were designed with sulfur based fuel.

I wouldnt on a def system but in my old 03 clapped out lb7,she loves the evinrude 2 stroke,I run a quart or more every fill up,it quiets the injectors down immensely,also if you ever Google 2 stroke burn test you can see 2 stroke acuatlly leaves behind almost no deposits,ever see what all other additives leave behind?,its night and day as far as noise and the amount of smoke produced running 2 stroke...before I ran it with a mild tune it would blow nice sized clouds when you got in it,now almost nothing,if you look at common rail diesels there is acuatlly so much metal to metal contact surfaces that rely solely on the diesel fuel for lubricity,it always amazed me people say 2 stroke is bad for truck designed to run on low sulfur diesel at min 500 ppm but think additives with less them 15 ppm will help in any way shape or form,bio diesel is good but I dont have it by me,opti-lube is good stuff but way too expensive 2 STROKE!!!! IS THE KEY

Those old Mercedes diesels will run on damn near anything. I’ve heard you can run them on straight vegetable oil. High injection and low compression.

working gas station in winter Norway, some taxi drivers used 2 stroke oil when filling because of the drier winter diesel

Pretty sick car man. You aren’t overly obnoxious like most diesel owner youtubers so I’ll subscribe

4:50 That's just Project Farm running a test.

Dude in town comes and fills his whole tank with used oil from us and burns it all summer long

Bet that really pumped up the powerband on that ripper!

Premix is when it's bought already mixed with fuel. Two stroke oil isn't "premix"

Yes ...more on EDT...I started using it in my 2015 powerstroke about 4 months ago...not sure if it really makes a difference but for the price hope it lubes the cp4...mine is deleted, fass fuel pump and cold air ...running a light tow tune...Thanks!

If you want more power and clean injectors use either Millers ecomax diesel or pure 2-ethhyl hexyl nitrate( its the main ingredient in millers ecomax diesel. Its a cetane booster and genuinely gives noticeable power improvements along with a host of other positives and zero negatives. All other additives are just horse shit and a waste of money. I usually add 100ml-150ml per 50 litres. This is the max you'd want to go to. I've often put more than that in, it doesn't seem to hurt it but it doesn't do any more it just needlessly wastes it. The recommendation is 50ml-100ml per 50 litres. But I've found you can get better performance up to 150ml per 50 litres.

Diesel fuel is an oil anyway. In fact Diesel engines were invented in 1896 but the petroleum-derived crap which we now call Diesel fuel wasn't invented until 1933. So from 1896-1933 all Diesel engines were run on other stuff, commonly hemp oil, peanut oil, or similar. The Diesel engines of today aren't much different, and can often be run on the same stuff with only a little modification.

I found this video, trying to answer a question. To my understanding. The only reason why a diesel engine can't run on gasoline, is because fuels like gasoline & alchol are not oily enough to lubricate the high pressure mechanical fuel pumps of a diesel engine....So does this mean a diesel engine will run just fine on 2stroke oil and gas premix? Maybe enough oil in the gas, until it feels like diesel between fingers? Maybe a higher gasoline ratio then that feeling?

Only use mineral 2 stroke, not synthetic. Synthetic doesn't mix well.

This engine work on any oil on planet, just oil.

I used supertech 2 stroke in my duramax and it actually helped the injectors. Probably wouldn't use it on a brand new diesel.

Ever tried putting used engine oil in with the diesel?

Not to be a smart-ass but 1 oz to a gallon is 1:128 ratio. I know it doesn't really matter. Cool video.

I only use a premix when I'm running winterized fuel. AmsOil Sabre at 12 oz for a 48 gallon fill. So far leaner than your test.

When you add oil to diesel it causes the fuel to last longer but you will loose power..

2stroke pre mix shouldnt bother injectors. It doesn't on gas injectors or needle jet on carbs etc

Surprised this doesn’t have more views

Putting the dinosaur bones back in the fuel is a good thing

In this type of your car i use direct oil without mixing and it runs without a single problem what about new cars

You are WAY off. :) The point is using TC-W3 oil only and at 640:1 ratio.

2SO was designed to clean as it burns. It has specials detergents for that purpose. JASO-FC or FD (or equivalent) is what you are looking for. The 2SO itself does not provide more power/increased fuel economy. The cleaner engine does that. Add 250ml to 80L of diesel, and Bob’s your uncle.

Not ment to use pre mix your ment to use low ash 2 stroke

It would probably run on pure two stroke oil

Diesel is an oil

Yes, would like to hear your opinion on the Hot shots EDT, I be using Ford PM-22 and Stanadyne.

Im not 100% myself but i think 200:1 mean 200L of fuel mixed with 1L of oil🤥

Hey when are you going to do an install and product testing for spe on there new low temp high flow thermostat, thanks for the vids.

There’s like 3 operational brain cells in this entire video! FYI I’m certain the injectors will be more than fine

Do a video on your power stroke fuel added mix

How about on 4 stroke motorcycle?

This engine works on clan oil

Best video yet

I passed emission test, thats what happened

Hell most diesel engines will run just fine on straight 2 stroke oil or Atf. My 5.9 24V is burning 32:1 diesel/2 stroke right now.

They are running those cars off of straight cooking oil!!..and no plugged injectors!..don’t worry about the injectors…as far as the 2-stroke oil goes, you could go to 200:1 or even higher because 2-stroke engines rely entirely on that oil to lube the bottom ends of those engines at extreme rpm’s and pressures…a quarter of a quart to a full tank would be more than enough!

Try archoil I use to use hotshots switch to archoil oil and fuel additives noticable difference

Bruh you could drop a gallon of any oil in your mechanical fuel pump diesel

well diesel is a oil so well yeah adding oil to oil

dude. my girlfriend won a $.15 cent off a gallon of fuel. i drive a diesel and it’s usually between $2.39-$2.59 a gallon. MY CIRCLE K DOESNT HAVE DIESEL PUMPS

diesel acts like oil

It boosts cetane count. Not sure on the whole lubing your fuel system comment.

More info on hotshot secret please...

Nice 300sd Mercedes Benz

I have a 100 gal transfer tank in the bed of my 12 valve. I put used motor oil in the tank all the time I also fuel my truck and small tractor from this pump that way I'm always putting filtered fuel in my tanks. I have mixed as high as 50/50 mix truck runs just fine 275000 and still on the original p pump and I also use hot shots secret every 3 months

You used fully synthetic 2 stroke oil, this is a huge no no, only use low ash mineral 2 stroke oil.

Blown head gaskets?

You probably just put to much oil in but hey send it

There’s virtually nothing you can put in those old 300ds that will clog them 😂 you can run them on straight vegetable oil. A little two stroke in all fuel on all engines is the ticket!

6:55ish that just sound a diesel to me

is it an automatic?!

U said at beginning 1oz was 50:1 so what makes u think 10 gallons needs 13oz to b 100:1 that would make it like 40:1 ....key word there like

What year is this Mercedes?

OLD diesel tech vs new. DPF and zinc is bad news. That is why zinc is not in modern diesel oil.

Didn't you just dump like 70oz of sea foam in the tank? You dont need pre mix....lol

When you learn more in the comment section. ? It’s a good video then !!!😮

what about 100% 2 Stroke Premix OIL

Wtf is premix oil

2 stroke oil doesnt bond with diesel when mixed. It will just settle to the bottom of your fuel tank ... fact.

Old diesel engines with mechanical injection pumps runs very well with 2t oil mixture. It purrs like a kitten compared to the low or no sulfur diesel sold nowadays. I've been using it for 15 years now for my two old trucks. Without the mix it vibrates a lot. And also most of 2T oil has de carbonizing properties.

Oil = carbon. Use archoil

🤷🏻‍♂️ never done it

Dawg what are you saying

Diesel is oil,,

Old timer here in Oz say put couple litres of petrol in the tank now and again

ATF would be better

Bro automatic trans fluid works way better and you get more for the same price.. mechanical injection only.. efi don’t like it

I used ATF .

1oz to 1 gal of diesel

Hi!i like how you talk.every second word is um.

Two stroke oil works well but sadly will cause zinc fouling of the injector tip and just inside therein.