What I Do With Broken Dirt Bikes 

DON'T STOP MAKING THESE VIDEOS, this is the reason why I'm subscribed to your channel, keep it up man.

I look forward to using the ultrasonic cleaner for nuts and bolts small brackets etc, awesome idea! Thanks.

Nice work as always Cameron looking forward to seeing the next project have a good day.

Great video. What I find the ultrasonic cleaner particularly good for is to clean carburetors and the parts inside like the jets etc.. They can do miracles with those

Hope you enjoy your ultrasonic cleaner. Simple green works wonders for most applications. There are many effective cleaners for different metals but you have to experiment to be sure you do not damage any metals. I screwed up some needles from a KX 60 carb by using a degreaser called superclean. They got pitted in a 5 minute ultrasonic bath. I like to do my carbs, and brake calipers and master cylinders once a year because I can.

Awesome work man! Hard to find people that do these types of videos! In my opinion this is what i love to see! Keep it going man love your channel.

You do excellent work! Love the videos, keep them coming.......

Damn. Loved this quick series. I really like the idea of doing a part giveaway every few vids. 👌👌

I love watching ur videos I learn how a 4 stroke motor works watching ur videos👏

I think you need to run the ultrasonic cleaner longer and higher in temp (only when you have plastic or rubber parts, you need to be careful with the temp). I run mine at 80 degrees celcius (the max temp in mine) for 30 minutes! It works great for carbs, my wr250f runs great now ;) great video btw. Have a nice day

Check out the "hornady hot tub" ultra sonic cleaner. For all the nuts and bolts and other hardware, I use a Frankford 30 lbs tumbler with stainless steel media. It will make that stuff shine!

As always, another good one!

You do awesome vids you always make my day keep up the good work

Excellent work

I am doing a kx250f engine tear down now and now I’m scared that I’ll not be able to reuse a lot of my engine parts too. What was the final out come of this kx250f in the long run?

I really like your set up with pressure washer tank and solvent tank.

Make a video about the power wasing cabinet.

That ultra sonic cleaner may just be perfect for hardware!

Great video, as always, Thanks Cameron , you are Amazing

Make the crank into a trophy!

Would like a berrymans carb clean solovent work in that ultrasonic cleaner?

Love the video.. new crf ??

Hi, how are you? I'm from Brazil and I'd like to know what products you used to wash the parts. Thank you

Dude the presure washer is the go how is that thing set up iv never seen anything like it

Hermano la tenés muy clara con tus herramientas.

Clean a carb on the little machine, i think is going to look sick!

Is that pressure washing box the same as the sandbox? Is there 2 red boxes...or is one doing double duty?

How is your pressure washing cabinet made, want to build my own

not my choice of music but the guy knows his stuff and he should keep it up, and that ultrasonic cleaner exceeded all my expectations, i didnt think it would do anything

The shop I work at we use a cap full of ultrasonic cleaner solution with water and leave the carburetors in for a hour

Hi Cameron. What liquid does the white bucket contain?

Cameron, I'm sure you have put this out before but I cant find it. What manufacture is your pressure washer cabinet and/or where you can buy it? Thanks for your time.

On the ultrasonic cleaner if the lid is touching the part it won’t clean as well and it won’t do anything if you leave it off

Cameron, can you do a video on your parts pressure washer please? Setup and how you got it working. Thanks

Nice Video👌👌👍🏻👍🏻👍🏻👌 i have a question is a kx 85 a good bike 🏍?

i have a used bike with i bought this summer and in a few weeks it will be winter and i want to know what kind of maintenec i need to do in the winter time so i would be ready for the next season ? do i need a engine rebuild or things like that ?

Best Chanel on youtube

Nice vid- very informative, Cameron. How do you dispose of the dirty liquids in your cleaning tubs and machines? Thx.

Estou aprendendo com seus vídeos

Great video!:D

Good evening? Do you have a video of how to dismantle the shock absorber of the CRF 250x?

Using a small plastic or metal screen with some small rubber feet will help to reduce the overall noise I have found. (keeps the part off the base of the tray from rattling...I think, not a scientist but it works pretty good here.)

The dirt in the cam came from the link you cleaned...Not sure if this would help you or not since you get frames so freakin clean and nice looking but a Vapor Blaster is the thing to have..It puts an unbelievable awesome surface on aluminum that`s been pitted..You know how a new CR/XR/CRF frame looks like it`s coated or painted, well it been vapor blasted at the factory and it closes the pores in the metal so it`s easily cleaned.....I used it on my XR650R frame and rims that were pitted from sitting in a damp barn for 10 years and the bike looks like new now..Wish I could send you picks of it..You could start buying bikes that are a little older and make them like new again ! Just a idea...PEACE

Cameron, do you have a video about personal stuff ? Like how old you are, what got you into this line of work, how long you`v been doing it, ect.....

I have noticed that ultrasonic cleaner is very good for cleaning carburetor parts, you should try. :) Can i ask about your surname? It sounds very Finnish so do you have any relatives from Finland? Greetings from Finland and keep making these videos they are fun to watch! :)

Hey Cameron LOOOVE your vids...your awesome !!! I have a question maybe you can help me with ? My 14 KLX 110L is lacking power, it's more noticable in 3rd & 4th gear, especially when trying to wheelie, theres just no power to keep the front wheel up. I adjusted the valves, cleaned the cab and the air filter but to no avail. I do wheelie it alot...don't know if could have hurt somthing ??...any suggestions ??

what size tank is the ultra sonic cleaner ? 2 L ?????????

It works very well if you put a carburetor in it it cleans the whole inside

Try a needle bottle (or the likes of one) for pin point lube application. Cheers.

Using ultrasonic wth soaking chemicals for parts !!Clean n fast :)

Can you try and dump all those used nuts and bolts on that ultra sonic cleaner? would really love to see the end result..

Nice ultrasonic cleaner

A hug from Brazil, my friend.

Put a bucket of the Ultra sonic cleaner ; to make it less noise. Love ur vids!

How much psi is your pressure washer there?

Great vid again can u pls help me and tell me how to get water out my pinkie head where the carb intake goes got water in there and can't get my pitbike to start

Hi i'm from Indonesian 🇮🇩 I can't wait for Ultra Sonic clean Headcylinder 2T😍 @Cameron Niemela

Cr500 next?🤞🤞

Love you cameron i from iraqi 🇮🇶♥️

That little ultrasonic cleaner would be great for throwing all the bolts and nuts into

Honda bc of the red tool box?

Ultra sonics are great for the insides of parts you can't otherwise get too

The smal one is good for bolts

Hi Cameron. Hope you're feeling better. Out of curiosity, what type of camera and lens do you use for your videos?

Good jobe mr. I am from to indonesia borneo island....

สูดยอดเลยครับเก่งด้วย FC เลย

I use simple Green on my handgun and my rifle parts all of the time

Do you do this for a living or is it just a hobby you do? I just wondered, because my garage is getting better and better equipped whilst I do everything on my bike on my own. ((Mostly)) I really like the pressure washer... I also wan't one now that I've seen it :D

Do you run rotella even in the winter?

What type of pressure washer do you use?

When will that clutch basket be for sale? I need It and I can't find one any where else

I am never getting a fourstroke, way too much small parts

Your Videos are insane

Vapour / soda blasting will give better results quickly, ultrasonic cleaner for very small parts and carb internals

When cleaning Metal parts, like other materials, three major things to consider; (a) Chemistry. (b) Temperature. 3 (c) Agitation.

Vc é de mais cara

How do you keep track of which bolt goes where when putting bikes back together, confuses the heck outta me hahahaha

Hey man I would look into selling some of of your old parts that you would normally toss in the trash for scrap metal. Make some money and minimize waste

Get a bigger ultrasonic cleaner. Maybe the more powerfull, the better it will do. Keep it up!

Hey your link it to the simple green for the ultra sonic cleaner. Do you by chance have the link to the actual ultra sonic cleaner

Year?

Cr250 is the next bike.......?

السلام عليكم أود أتعرف على مادة نتواياج من فضلك

how the hell does a piston just explode like that, Do you live on the rev limiter?

An ultrasonic cleaner is made to loosen the dirt, not remove it. Good video btw :)

Surprised you didn't want an ultrasonic cleaner before now? Mr Clean

Should pressure wash before ultrasound

Maybe you should put the smaller parts in a bags a label them with the name of the part.

@5:24, I was hoping you'd find me outside😧😩😳

💯💯👌👌

Simple green is pink? 😁

5th such a great achievement

I thought u we’re doing a rebuild on this bike

como puedo participar por una parte de moto ?

Be Carfule not to use a alkaline cleaner fore aluminum parts, they will collor blackish.

A new Honda project??? :)

sick

The Piston perfect ash tray.

Link for the ultra sonic cleaner ?

Man let us see the video of you busting that piston!