What is a Bright Cap / Switch? Guitar Amps Explained 

really clear as to what is a bright cap and its modifications. Thank you !

Great explanation! Thank you. I have a vintage 1971 Vibrolux. For some reason I had it in my head that having the bright switch “on” provided the most pure unaffected signal path and that turning it off was when the capacitor was engaged and that it was simply bleeding highs to earth - like a guitar tone control. Therefore, my nature instinct was to run with the bright switch “on” to have the lease affect on my signal and just reduce highs with the Treble control. So this misconception of mine meant that when I first got my amp and played it at low volume at home, I setup a great clean sound with the bright switch on. Then I started adding gain pedals and couldn’t understand why they sounded like s#@t. This initially put me off the amp until I figured out that I needed to run the bright switch “off” and use the treble control in a higher position to get a good compromise between sparkly clean and nice overdrive. Your video has now made sense of what I experienced. Cheers.

I have a Blues Junior III and I've always found it too bright especially when used with overdrive pedals which can give you a harsh sound. I'm planning to clip the C3 bright cap as you suggest. Thanks again for some useful and well explained information!

Nice Video! I never realized that the bright cap does less as you turn your volume up!

I came here to reassure myself that i was about to mod my amp correctly! You hit on some good points and confirmed my assumptions!

Very Cool Video Kley! We've all heard about the bright cap in amps but seeing it explained like this on a schematic really helps visualize it, keep these Tech vids coming brother! Love em, Peace!

Thanks a lot! Very informative. I’ve had a new Fender with a bright switch and turning it off on overdrives really played well with pedals. On very harsh sounding! On amps with it on, either has to turn up and attenuate, or run stack pedals…Like a Morning Glory always on, with the treble switch down. Then let my other overdrives run through that. I don’t think many want to do that, and not the most ideal if you like your amp tone to have to stack 3 pedals to get maybe 1 pedal you like to not sound shrill. But a lot of people do this, and honestly probably a bright switch mod would be cheaper. I fight with it, and my last amp had the switch. I actually got rid of the Fender with the bright switch for other reasons…and I just bought a Tone King Imperial MK2! I’m debating as it has one in it. But it does have an attenuator on the clean channel, and I put a Morning Glory with the treble switch down. It’s a work around, but might consider getting a push cap mod, vs drilling a hole. Just because of the lifetime warranty.

best tube amp schematic explanations on ytube.

Thanks for this info. Just what I needed!

great explanation, Kley! thanks.

Very informative, clear, helpful. Thank you.

I never noticed it making my pedals sound harsh... But I'm only using boosts and low gain drive pedals (mostly). Does it have less of a negative effect on low gain drive pedals?

Now i really understand how my Deluxe works..thank you ! I´m thinking about chaning the pullboost on my 79 Deluxe into a Bright Switch..do you think that could work easly ? Pulling the Boost and having the Bright Cap out of the way would be my ideal ! Best Regards

Could you make a video explaining the supro amp circuit?

what type of dialectic do ppl use for bright cap...I've only experience with silver mica, and it sounds to icey, does polyester sound smoother?

Nice video. I have a 1979 Marshall 2104, and it's pretty bright when the volume is set at lower (more practical) levels. My question is: suppose I remove it, then happen to have a gig outside where higher volume is now more practical, will that have the inverse effect of not allowing higher frequencies to pass as quickly as lower?

Would directly on the guitar amp's input jack be a good place to install or experiment with a bright cap(s)? Or it does not work well there and should be placed elsewhere in the circuit? I have a somewhat midrange based tube amp that has no bright input option nor a presence control, and I would like to brighten up the amp's overall tone just slightly.

Nice intro vignette.

Thank you for your help !

I'm a bit of a novice, could you do this in block

Nice

click baited myself into this abyss 😥🙄